Error in Post processing of Client Copy

Hi,
While doing a Client copy, i am facing an error in Post Processing step.
Its getting hanged saying:
"Client copy is completed with status "Post-Processing Required". There is an error in log for object FINB-TR-DERIVATION"
Please help me out of this error.
Regards,
Twinkle

Hi Twinkle,
I got the same error while doing client copy.
During processing of client copy there was huge workload into your system. But due to workload into the system, these tables weren't created as fast as needed by Client Copy process.
This is the reason it failed in post processing step.
You can go thru the note 1235955.
Hope this will solve your problem.
Regards,
Habeeb

Similar Messages

Parallel Processing in Client Copy

Dear Experts,
I would like to know if it is possible to increase the parallel processing while Client Copy is in progress?
If not, is there any way to speed-up the process.
Also, if you please let me know how I can find out the CC is progressing. For our case, the client copy is running for a very long time and the last updated table contains huge data. Now, checking from tablespace in OS level (or DB02), I am not able to understand if the copy is going ahead or its is stuck somewhere. There is no error message displayed so far.
Your quick inputs are appreciated.
Thanks & Regards,
Sujit.

Hi,
You are doing client copy on existing client or new client ??
If it is existing client, then it will take time depend upon the data, becoz when you do client copy it will first delete the data from exisiting client and then it copy the new data.
Thanks
Anil

Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Local Client Copy error in post processing phase

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan

Post processing after system copy from standalone to cluster enviornment

Hi,
I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
The steps I have followed as follows.
. setup the machines in the cluster environment ( Windows 2003 EE server,sql 2005 SP3)
. Backup the current database in the source system
. Given a different SID (TBW) during the System copy installation .its a dual stack installation.
. Restore the database in the target system and select the back up restore method during the system copy database installation step.
.The installation completed successfully and i m having some doubts regarding the post processing steps after this .
We want to retain the same client in the target system ,for this i need to rename the logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
Thanks
Arun Padikkal

Hi Arun,
You should probably post this question in a basis forum.
Cheers,
Diego

Error in Background Jobs After Client Copy

Hi,
We had performed a system refresh from a production client(with client no 300) to a quality server (client no: 200). The post processing steps were performed ok. Later the client 300 on the quality server was dropped. However, the scheduled user jobs in the background on client 200 still refer to the original client 300 and abort.
Is there any way of modifying there jobs(there are lots of them) so that the client(300 in this case) reference is modified to the existing client 200.
Points will be rewarded for good answer.
Thanks and Regards,
Subodh

Hi
The reason for the jobs getting cancelled could be that they are
client dependent jobs and inoder to resolve the issue, please
reschedule the jobs in client 200 and check whether the job fails.
Please let me know if all the jobs are failing or the issue is only
with the client dependent jobs.
Hope this information helps. Please get back to me if further
assistance is required. I would be glad to assist you.
venkat

Error in post process event handler

We should write a post process event handler that updates the manager field. So, I used the following code to update the manager field when a user gets created:
Code:
public EventResult execute(long processId, long eventId,
Orchestration orchestration) {
System.out.println("Test for Event Handler");
try
String userKey = getUserKey(processId, orchestration);
System.out.println("USERKEY1"+userKey);
UserManager userMgmt = Platform.getService(UserManager.class);
System.out.println("USERMANAGEMENT"+userMgmt);
System.out.println(userMgmt.modify(new User(userKey)));
userMgmt.modify("usr_mgr_key","28",new User(userKey));
System.out.println("USERKEY2"+userKey);
} catch (ValidationFailedException e) {
System.out.println("Exception1");
} catch (AccessDeniedException e) {
System.out.println("Exception2");} catch (UserModifyException e) {
System.out.println("Exception3");} catch (NoSuchUserException e) {
System.out.println("Exception4");} catch (SearchKeyNotUniqueException e) {
return new EventResult();
private String getUserKey (long processID, Orchestration orchestration) {
String userKey;
String entityType = orchestration.getTarget().getType();
EventResult result;
result = new EventResult();
System.out.println("Entity Type"+entityType);
System.out.println("Process ID"+processID);
if (!orchestration.getOperation().equals("CREATE")) {
userKey = orchestration.getTarget().getEntityId();
System.out.println("UserKEY0"+userKey);
} else {
OrchestrationEngine orchEngine = Platform.getService(OrchestrationEngine.class);
userKey = (String) orchEngine.getActionResult(processID);
System.out.println("UserKEY-1"+userKey);
return userKey;
It compiles fine and when we try to create a user, the user gets created successfully. But, the expected behaviour of upadting the manager field with the user key '28' is not happening. My approach above - is it right or is there any other method that will make it work?
The output message I see is:
Test for Event Handler
Entity TypeUser
Process ID140343
UserKEY-1613
USERKEY1613
USERMANAGEMENToracle.iam.identity.usermgmt.api.UserManagerDelegate@75ecf9ed
<27-Feb-2012 10:56:41 o'clock GMT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
oracle.iam.identity.usermgmt.vo.UserManagerResult@14da2ada
<27-Feb-2012 10:56:44 o'clock GMT> <Error> <oracle.iam.identity.usermgmt.impl> <IAM-3051212> <An error occurred while searching for users - : [usr_mgr_key].>
Exception4
Thanks
Krish

i hope wrong coding.
Use this code.
UserManager userMgmt = oimClient.getService(UserManager.class);
//Attribute you want to modify
HashMap<String, Object> atrrMap= new HashMap<String, Object>();
atrrMap.put("usr_manager_key", Long.valueOf("1")); //user will upadated with manager key 1 (xelsysadm) make sure usr_key 1 (manager) exist in OIM.
//get the user to whom you want to modify
User user = userMgmt.getDetails("usr_key", "41", null);
user = new User(String.valueOf(user.getId()), atrrMap);
UserManagerResult result = userMgmt.modify("usr_key", String.valueOf("41"), user);
//UserManagerResult str = userMgmt.modify("usr_mgr_key","111",new User("41"));
System.out.println("UserUpdate.process() "+result.getStatus());
Also don't use UserManager class, As it will go for looping.
Use
EntityManager entityManager = Platform.getService(EntityManager.class);
entityManager.modifyEntity(orchestrationTarget.getType(), userKey, mapAttrs);
Also I am assuming you want to use Associate manager With user use case.
Thanks,
Kuldeep

Error on FMFMOAFNP1000001 table during Client Copy

Dears,
we are trying to run a Remote Parallel CLient copy from FNP-100 to FNQ-200.
The copy fails reporting this error :
"FMFMOAFNP1000001 CA-GTF DDIC Error (See SE14)"
We check both in source and target system and this table does not exist.Is not visible both in SE14 nor SE11.
We run the RFC comparison between the two systems and no DDIC differences are reported.
We try to apply note :
Note 1100875 - Client copy: DDIC error for tables FMFMOAsssmmmnnnn
but tx SNOTE says it's obsolete and cannot be implemented.
What we have to do to perform our client copy ?
regards

Hi Roberto,
Have you find any solution for this? coz we're facing the same error.
rgds,
fafizah.

Pre and post steps of client copy

Hi,
There are some client copy official guide?
I was reading the help.sap.com, but in this guide not appears the pre- and post- steps of the client copy.
More thanks

>>If i use the copy profile SAP_APPL, this steps will not be necessay,no? The user master data from target system will be maintained.
Yes. You are right. This Profile will not over right the User Master Record. It is given on the document.
http://help.sap.com/saphelp_nw04/helpdata/en/99/0a2a887e2511d2a6250000e82deaaa/content.htm
Regards,
Subhash
Edited by: Subhash.Chandra on Jun 3, 2011 3:18 PM

Error in Post Processing Action for a Conc-Request

Hi,
I am using XMLP 5.5 and facing the following issue with a particular report. The issue is not encountered when tested in the XMLP 5.5 Desktop Viewer, but gives the following error when run EBS 11i10.
The following is the OPP log:
[1/23/06 12:31:09 PM] [UNEXPECTED] [44876:RT7168339] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:580)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:378)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:197)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1535)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:925)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:2108)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1368)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
     ... 17 more
The issue is that it reads "Cannot convert to Number". But i am not sure as to which form field is causing this error as i dint encounter this issue while testing it with Template Viewer.
The template i am using contains lots of form-fields and its difficult now to determine which field is causing this error. Can someone in the forum help me in finding out which form field is causing this issue. Is there some way i can find that a particular field in the template is causing this issue.
TIA,
Nitin Jain

Hi Nitin
1. Do you have 5.5 installed in Apps? They must match if you have used any 5.5 features in your template and you do not have 5.5 on the server then you are going to get issues.
I suspect its not #1 but be sure.
2. Are you carrying out any calculations in your template or formatting a field as a number ?
It might be working on your test data because that is good data. When running live you may be getting bad data or nulls and you are not handling it in your template correctly?
The only real way is to start removing sections of the report and testing until you can pinpoint the problem. Then check to see if the data is corrupted in that field.
In the next release (of course) things gets better around errors and warnings.
Regards, Tim

Error in client copy - EFG_FORM_CC_EXIT_AFTER

Hi,
I am getting the following error while doing client copy,
it has copied all the tables , but at the end it gives message,
===============================================
Target Client           500
Source Client           000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Successfully Completed
User                    SAP*
Start on                26.09.2007 / 01:48:17
Last Entry on           26.09.2007 / 02:56:00
Statistics for this Run
- No. of Tables             53644 of     53644
- Deleted Lines                 2
- Copied Lines            5090006
arnings and Errors
Table Name              Component Package
EFG_FORM_CC_EXIT_AFTER CA-GTF-PWB Program Exit has Syntax Errors
EFG_FORM_CC_EXIT_BEFORE CA-GTF-PWB Program Exit has Syntax Errors
============================================================
please advice.
regards,
SM

Hi Shark,
Your client copy seems to be ended with just warnings. As mentioned, please correct those 2 forms in the source system and try to import to target client. Discuss with apps member whether they need these 2 mentioned forms. If they don`t need it ,you can ignore the warnings.
Perform post processing after client copy.
regards,
Vinodh.

Client Copy error during client export / RX file is not getting

Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Hi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Client Copy error during client export / RX file is not getting generated

Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Hi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Logical System and Client copy

Hi Gurus ,
             I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
Selvan

Hi Manjula ,
              Below i mentioned the full detail about the error .
    RFC destination for client copy in systems with Financials Basis     (FINBASIS) component.
The system could not find any suitable RFC destination for processing     for client 000.     This note also appears if an RFC destination was found but this does not     work.     o   RFC destination: FINBTR@ID3CLNT000     o   Error text: Error during the retrieval of the logon data     Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection     or perform the following steps manually:     1. Create an RFC destination with the target ZK>source client of client         copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59.         To avoid errors when assigning the password or the authorizations of         the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination:         -   Transaction: FINB_TR_DEST (Destinations for Transport Methods of             the Financials Basis)         -   Client: 000
4. Start the client copy again.
Kindly advice me
selvan

Can a client be refreshed with client copy?

I created a new client by
doing client copy from client 200 creating client 202
Now I want to refresh client 202 from client 200 (ALL ON SAME SERVER) , can I just re-run the client copy with source client being client 200 to client 202?
If so what am I to expect?
If not, then do I need to first drop client 202 and then do the client copy to re-create the client?
maria

Dear Maria,
Greetings!
To be clear, now your situation is to have a client copy from your Production client 200 to the Quality client 202.
Coming to the status of other clients in Quality system, the data or any other settings of the other clients is NOT going to be changed because of this client copy.
As far as the configuration part, you will have to perform the following functionalities in your Target client (Quality - 202)
1. Transaction SCC9 - Select Profile - Choose the SAP profile as per your need.
2. Enter the RFC destination to the Source system client - Production Client 200 - This RFC destination could be an already existing connection between both the systems or a newly created one.
3. Make an RFC system comparison to be sure that the connection is perfect.
4. Set-up the parallel processing parameters, Menu option Goto - Parallel Process. This option is dependent on the physical memory availability of the Quality server.
5. Execute a TEST RUN, prior to start of the actual client copy to verify Target client feasibilities. In case of any mismatch in table definition or table fields corresponding action has to be performed.
Please remember the following pre-requsities before starting the client copy.
1. Both the Source and Target client is to be locked against access to end users or other users. For a pre-caution lock all the users except SAP*, DDIC, TMSADM, BASIS and other System Admin users in both the clients.
2. No auto-logout parameters or restrictions on workprocess runtime exists as profile parameters in the system.
3. Additional space for a client is available in the database so the the client copy in not interrupted.
Kindly process the client copy in a server session such that network interruptions and other interruptions could be avoided.
Kindly revert in case you need further informations on the same.
Thank you
Regards,
Vineeth

Error in Post processing of Client Copy

Similar Messages

Maybe you are looking for