Error in posting billing document ( Export Data Missing)

Hi Gurus,
I am facing a unique problem. When I am posting a domestic invoice with reference to service order material Group is LEIS( service withought delivery ) is LEIS, the system is displaying a message Document & has been saved (foreign trade data incomplete)
. When I run the similar transaction in a replication of above system there is no error displayed.
Also the customer is not permitting me to maintain the foreign trade data, as he says when we are not executing
Export transaction, why should we maintain this data???
We have replicated the masters in the parallel system & taken the same parameters to excute the transaction,
Please advice as to where this difference in behaviour is???
Also how do I overcome the export data error for domestic transactions.
Edited by: mukesh kumar on Jul 24, 2009 2:23 PM

Hi
This is because of the Foreign Trade: Export Data view selected for the material.
Check your material master whether the Foreign Trade: Export Data has been selected. If it is selected you will encounter the issue during the invoice creation.
Regards
Rajkumar K

Similar Messages

Error while posting billing document to Accounting

Hi,
We are getting an error when posting Billing document to Accounting .Eror "The document type is relevant for VAT.Please inset a VAT code in postings.
Thanks in advance.

Dear Ravinder
Go to VF02, input the billing document and execute. Now from the top menubar, click on Goto <> Header <> Header. There check what pricing procedure is flowing.
Now go to V/08, select that pricing procedure and check whether you have maintained the condition type for VAT. I believe you have not maintained and hence, the error. Include the VAT condition type and create a fresh sale order.
Meanwhile, you have to reverse the billing document via VF11, reverse PGI via VL09 and delete the delivery document.
thanks
G. Lakshmipathi

Error while posting billing documents

Hi,
I am trying to post billing documents for accounting , but I am getting some error related to number range.
I have checked number range assignments, where else I can check to find out error.
Regards
Nidhi

If you are getting error while creating billing document -
Check your number range status assignment in T-Code - VN01
If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
If Billing document is created and you get this error while posting-
Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
If the above does not solve - pls. mention the exact error with error code.
Thanks

Error in posting billing documents mesg FF805

Dear SAP Gurus ,
When the billing documents are created via VF01 the accounting entry does not get posted. The error displayed is is Tax statement item missing for tax code V1
Message number: FF805
We have multiple tax condition types and diffrent tax codes too ..when the value is zero in the second tax condition we are facing this problem
checked OSS notes...but of no help.
Please let me know if anyone has faced similar issue . Any suggestions in this regard will be greatly appreciated.
Thanks in advance.
Vj

Hi vijay
check the condition record of the tax condition types and check wheather it has the tax code V1. check wheather it is the input or output tax code. Is that tax code assigned to the account key and the automatic postings or not ?
Check in the condition records the combination you entered .For example , if you take MWST condition type and if you maintain VK11 for domestic taxes key combination as customer tax material as 1 and Material tax material as 0 then system wont pick. some times
But if you have entered customer tax material as 1 and Material tax material as 1 system will pick the tax amount. so pls check these combination also
Hope this helps you
Regards
Srinath

Error while posting billing document

dear gurus,
while posting the billing document,the following error will appears.
"no taxes on sales / purchases are allowed for accounting 20704540 1000, E4 not allowed."
please do the needful.

First check whether you have condition records for your tax. If it is there, then check the tax code assigned to the condition records. Seems E4 was incorrectly assigned to it. Check the correct sales tax code and assign. now try to post the billing document. Try first in sandbox or test environemnt.
Regards,
Sats

Error while posting billing document - Error belongs to Business area/G/L a

Hi All,
When i am posting the billing document i ma getting below error message:
Business Area must be entered, Pl check if the Business Area is correct Message no. ZT017
I think it is due to MWST tax condtion type and respective G/L account only.
When i post 17% tax of MWST i am able to post it - it is having one G/L account,
When i post 5% tax of MWST, i am not able to post it - Different G/L Account - I am getting above error.
Please suggest us to proceed further.
Regards
Lakshmikanth

Hi Lakshmipathi,
This is not at all related to VKOA settings, because the G/L account determination through OB40 here. But every thing is in place. A1 tax code with XXXXXX G/L account is working fine, A2 tax code with YYYYY G/L account is not working fine. If change A2 tax code G/L account to XXXXXX, it is working fine. Here only with YYYYY G/L account issue,
The error details already available in this thread.
Thanks and Regards
Lakshmikanth

Error in Billing doc posing to FI - Export data missing

Hi Experts ,
While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
Please give me solution which data may missing to post export billing documents to FI.
Amol

Hi amol
Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
Then once the billing document is saved it will be passed on to FI
Regards
Srinath

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Error: Export data missing

while Invoice-Release to accounting I got error as "Export data missing"
when I check I found that Foreign trade data is incomplete as per system. Also I have seen foreign trade no also in invoice foreign trade/customes view.
I dont know why this error is coming. system is asking to complete foreign trade for which no customizations available.
So I want to know what triggers to generate foreign trade no means why it has become essentials to provide these data?
which master data are important to trigger foreign trade? I have not maintained anything in foreign tarde view in material master.
Also let me know how can I resolve this problem?
Vijay

Hi Vijay,
The note 173411 described that there are hard-coded checks for the
listed in the note. If you choose for business reasons not to use the
incompletion procedure, then it can be de-activated. For this, kindly
refer to note 118573.
Please complete the following steps:
- create a new customer project via CMOD.
- assign the enhancement V50EPROP (which contains the userexits) to
the customer project.
- place source code inside the include found in exit_saplv50e_005
& _006, for example,
INCLUDE ZXV50U06
       if ( i_exp_imp_flag eq 'E' ).
         clear: c_complete.
         c_complete = 'X'.
       endif.
- generate the two new objects (exit_saplv50e_005 & _006) via
SE37.
- activate the project via CMOD.
========================================================================
If foreign trade functionalities are to be used, the corresponding
customizations must be maintained using transaction VI29 and VI49.
note 354222    Foreign trade data incomplete for domestic business
may also be helpful.
Thanks,
Alex

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Tax GL determination error while posting billing doc

Dear Experts
Am able to post billing documents into FI for a customer from a plant with out any errors. But for the same customer,sales invoice generated from different plant (both cases, plant region is same ), it is not taking proper tax GL accounts w.r.t. the state.
Can anybody suggest, the SPRO config steps to be checked while creating new plants, where there is a link for tax GL flow and plant/sales office
Thanks
Venugopal

Hi,
Go to OB40. Maintain the entry for EXD and relevant tax code whichi is used in your billing document. Also update the proper GL Account.
Regards,
Jigar

How to change posted billing document

Hello every body,
I want to know how can we modify sales office field on posted billing document.
We want to change in mass two years of document. ( We are running on Ecc6.0)
Regards,
Mercedes.

As suggested, you CAN - technically - have a program directly update the table. However, there are two potential problems with this.:
1. If you have application issues with this - or subsequent problems with the invoice data, SAP will not support you.
2. A direct update will not cause statistical data (i.e. SIS structures such as S001, S004 or a custom structure) to be updated.

Error in posting Inventory documents for a serialized material

hi.,
Can someone update me the reason for:
1. Error in posting inventory documents for a serialized material
What are the steps to be followed during the
1. Creation of Serialized material
2. Creating a Purchase document for a serialized material
3. Generating a G/R for a serialized material.
4. Generating an inventory document for a serialized material.
Any update is much appreciated.
Tx.
Mahesh

Hello Mahesh,
Let me try to answer your queries.
1. Generally, how does the flow of Cycle counting go w.r.t to the Indicators A.B.C and D which has been configured in OMCO.
Would that be as per the Consumption/usage of the materials?
The following link will help to understand the cycle count process
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b8e3d43ad11d189410000e829fbbd/frameset.htm
2. How are the indicators of A,B,C,D to be set up for the other materials in the particular plant which have not been fixed as CC.
If you run the MIBC (Set ABC indicator) report, it will automatically set the ABC indicator based on your selection parameter.
3. How does the system take up the inventory count for materials that have not been flagged as CC Fixed.
Cycle counting inventory will be carried out only for the material with ABC indicator for cycle count, if you exclude the material from MIBC report or manual ABC setting then that material will not be considered under cycle count when you execute MICN report to create cycle count inventory doc.
4. How does the sytem take up the inventory count for materials for materials which have been flagged as Fixed.
Material with CC fix indicator means when MIBC report will not change CC indicator for that material with fix indicator, so when you run MICN report at that time system will take last inventory date from MARD table for that material and calculate the next due date based on ABC indicator in material.
Hope this helps.
Regards
Arif Mansuri
Frankly speaking I also dont know the process for rewarding the points, I put only one question so far but with no reply, so never got a chance to assign rewards.
But there is a way always, this link will help you..
https://www.sdn.sap.com/irj/sdn/crphelp#posted

FA Retirement- 21151: error while posting asset document: '100000039'

Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
Luz

Hi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks

Without tax is there any problem post billing document into FI

Hi All,
in my project we are not going determined any tax in sales order condition type. we are just maintaining the pricing condition.
is there any problem with out tax maintain to post billing document into account document.
Thanks,
KR
Edited by: kumar reddy on Mar 10, 2012 1:22 AM

If tax is not applicable, then dont maintain that condition type in pricing procedure.
G. Lakshmipathi

Error in posting billing document ( Export Data Missing)

Similar Messages

Maybe you are looking for