Error in posting during CV01n.
Error while checking in and storing: C:\Documents
and Settings\sadashiva.prabhu\Desktop
Hi,
Did you solve this issue.
If yes please let me know.
Thanks & Regards
Rajiv Roshan
Similar Messages
-
Error RW:50004 during install of R12 on win 2003
Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad. -
Error while posting sec.HighEd cess (1%) in J1iin.
we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such commentsHey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
FA Retirement- 21151: error while posting asset document: '100000039'
Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
LuzHi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks -
Getting error while posting GR using IBD from BAPI_GOODSMVT_CREATE
Hi Experts,
While posting GR from IBD using BAPI_GOODSMVT_CREATE with all necessary values like plant,material,mvttype and serial numbers etc...
getting error from BAPI return "1 E VLA 315 Item 000010 requires serial numbers; use the inbound delivery dialog".
I have tried with same IBD number from Tx: VL32N able to post Goods receipt successfully with above data,but whereas tried to post same IBD with Tx:MIGO getting same bapi error as above mentioned.
I have tried with solutions some of the blogs from SCN but no luck
is it necessary to implement this note in my system?
Error message VLA315 during GR for inbound deliv. using MIGO
Can you please give me suggestions what i have missed in my code/Configurations.
Thanks,
Syamis it necessary to implement this note in my system?
Error message VLA315 during GR for inbound deliv. using MIGO
Yes. Installing notes using Tx SNOTE is very easy. If you find a note that is relevant for your system, just install it. -
Error message (M3024) during parallel goods movement
For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.
HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems. -
An error has occurred during report processing. (rsProcessingAborted)
Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet” -
Error from opmn during process control operation
This is the error I get while starting "home" instance on Windows Server 2003 SP2 32b box.
Product - AS10gR3 (10.1.3.4)
===
oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:70)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:70)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:31)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:40)
=====
Tried - getting OPMN error while starting Oracle SOA Suite - doesnt work.
Any ideas anyone?Hi,
Can you post the error from the begining, this is a generic exception and could be for any reason.
Also, please refer:
After Changing The HTTP Port To 80 Attempting To Start OHS Service Fails To Start Apache [ID 1104898.1]
Error During Stopping Oracle Application Server Components With "Error from opmn during process control operation" [ID 941822.1]
"oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error" Thrown by OC4J During Startup Running OIM [ID 832025.1]
Regards,
Mithun -
Idvd5.01 Errors were found during the burning process (Burned Finished)
I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.
Hello, Oscar,
This message can mean several things.
First, are you burning an iMovie or a slideshow or both?
Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
Does everything encode properly?
Are you able to 'save as disk image'?
Post back with some more details about your project. -
Error in Post processing of Client Copy
Hi,
While doing a Client copy, i am facing an error in Post Processing step.
Its getting hanged saying:
"Client copy is completed with status "Post-Processing Required". There is an error in log for object FINB-TR-DERIVATION"
Please help me out of this error.
Regards,
TwinkleHi Twinkle,
I got the same error while doing client copy.
During processing of client copy there was huge workload into your system. But due to workload into the system, these tables weren't created as fast as needed by Client Copy process.
This is the reason it failed in post processing step.
You can go thru the note 1235955.
Hope this will solve your problem.
Regards,
Habeeb -
Error code - 0x8004fd22 during intellisync
error code - 0x8004fd22 during intellisync. Everything was fine last week, now it's not. All works except the calendar. i got it to go from the puter to the phone, but it won't work the other way. Any ideas?
Hi and Welcome to the Forums!
That error code produces no results in the public KBs. Therefore, the only thing I can think of is to advise you to activate advanced logging and see if that reveals anything useful to you.
KB01451How to turn on advanced synchronization logging if a wired synchronization fails
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error in posting Inventory documents for a serialized material
hi.,
Can someone update me the reason for:
1. Error in posting inventory documents for a serialized material
What are the steps to be followed during the
1. Creation of Serialized material
2. Creating a Purchase document for a serialized material
3. Generating a G/R for a serialized material.
4. Generating an inventory document for a serialized material.
Any update is much appreciated.
Tx.
MaheshHello Mahesh,
Let me try to answer your queries.
<b>1. Generally, how does the flow of Cycle counting go w.r.t to the Indicators A.B.C and D which has been configured in OMCO.
Would that be as per the Consumption/usage of the materials?</b>
The following link will help to understand the cycle count process
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b8e3d43ad11d189410000e829fbbd/frameset.htm
<b>2. How are the indicators of A,B,C,D to be set up for the other materials in the particular plant which have not been fixed as CC.</b>
If you run the MIBC (Set ABC indicator) report, it will automatically set the ABC indicator based on your selection parameter.
<b>3. How does the system take up the inventory count for materials that have not been flagged as CC Fixed.</b>
Cycle counting inventory will be carried out only for the material with ABC indicator for cycle count, if you exclude the material from MIBC report or manual ABC setting then that material will not be considered under cycle count when you execute MICN report to create cycle count inventory doc.
<b>4. How does the sytem take up the inventory count for materials for materials which have been flagged as Fixed.</b>
Material with CC fix indicator means when MIBC report will not change CC indicator for that material with fix indicator, so when you run MICN report at that time system will take last inventory date from MARD table for that material and calculate the next due date based on ABC indicator in material.
Hope this helps.
Regards
Arif Mansuri
Frankly speaking I also dont know the process for rewarding the points, I put only one question so far but with no reply, so never got a chance to assign rewards.
But there is a way always, this link will help you..
https://www.sdn.sap.com/irj/sdn/crphelp#posted -
Transfer posting during invoicing
Hi Experts,
Please refer the spreadsheet enclosed for your reference. I would like to add that we are using India localization in our project.
Issues:
During Invoice posting the system is forcing us to maintain GL account determination for main transaction 0250
In case Late payment charges in previous invoice is paid/cleared – no issues (Inv # :9100001584 Doc#: 10000002837 Dt:05-08-2013 Amount: 9.53)
In case Late payment charges in previous invoice is open then system automatically clears the past late payment charge using main/sub 0620/0010 and posts the same as Rec. Transf. Posting Invoicing using main transaction 0250/0020.
Is there any way to stop this as its unnecessarily creating additional line items. Please advise.
Thanks & Regards
Satyajeet GhoshHi Satyajeet,
Please refer to the below responses-
(A) Main Transaction 0250- I think you have to maintain the relevant entries in EK01 and EK02.
Please refer to the below link which also discusses the same issue
Account determination error during invoicing for internal main transaction 0250
(B) Rec.Transfer posting during invoicing- I think you are calculating the late payment charges for the Overdue items during invoicing with the following configuration in place-
IMG-->SAP Utilities-->Invoicing-->Invoice Processing--->Define Control for Additional Invoicing Functions
If that's the scenario, then check event R418.
Hope it helps...
Thanks,
Amlan -
HP OfficeJet 7310xi printer error code 0x885e2da6 during startup
HP OfficeJet 7310xi printer error code 0x885e2da6 during startup, will not progress to head alignment or connecting to the network after running for a long time. Fax light blinks exclamation mark blinks as does the power light after the three clicks during power-up. Ink cartridges never move.
Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.
Maybe you are looking for
-
What are options for applying non-inventory costs to production orders?
We have a non-inventory costs that need to be assigned to product produced on production orders. There are two processes -make-to-order and make-to-stock. Currently we use activity rates to apply labor and burden costs to our production. We use sep
-
Oracle 8i and forms or reports 6i
this two palication are copatiblethere is not problem in developing on oracle 8i with developert 6i null
-
How can I copy word documents to my iPad
-
I've got the following mapping (only relevant fields shown): <class name="Act"> <extension vendor-name="kodo" key="pk-column" value="ACT_UID"/> <extension vendor-name="kodo" key="lock-column" value="none"/> <extension vendor-name="kodo" key="table" v
-
Upgrading from 1.1.6 to 1.3
Hi, I'm about to upgrade an applet from version 1.1 to 1.3. From what I've read in the forums, it seems that what I need to do to accomplish this is to download and install J2SE v 1.3 and then recompile my applet. Is this true? It sounds simple enoug