Error in posting transaction

Hi,
I am facing peculiar error in posting transction in Test system, but not in Development or Production system.  This is first time I am looking this error, please assist me in resolving the same.
*Global company IN07 is not supported
Message no. GI102
Diagnosis
The direct posting function could not find the global company specified. The global company has either been entered in the document or read from table T001 based on the transferred company code.  Each global company must be defined in table T880.
System Response
Direct posting to General Ledger cannot take place.
Procedure
Check the document as well as tables T001 and T880.*
Regards,
Krishna

Hello
Since the message talks about table T001 and T880. Try doing the following:
"In SM30, enter table T880 and click customizing button, then without project .. SAP will give you all the customizing paths for this table"
Then see whether your company code is existent.
Rgds

Similar Messages

  • Error while posting transaction to Internal order

    Hi
    We tried to make a transactions to the internal order, having available amount and we have posted the transaction less than the available amount yet received a yellow error message that the internal order budget almost exhausted. We checked the internal order budget it transaction KO22 and our prospective booking fit to the budget. But still we were unable to post because of the internal order budget. We could only solve to increase the budget with a bigger amount so we could reprocess the file.  Why is it always that the report shows budget is available but we are unable to post due to insufficient funds. Only on adding more funds we are able to post the transactions.
    Which is the correct report to view the budged is available and utilized.
    Regards
    Venkat

    S_ALR_87013019

  • ABUMN-error "Posting transaction is not possible (Value date not allowed)"

    Hi,
    When we are trying to transfer asset within company code thru Tcode ABUMN, we are getting a error as
    "Posting transaction is not possible (Value date not allowed)"
    What actually we are doing is we are trying to transfer the previous year asset for example say 01.04.2007 assets on today.
    the Parameters are as below
    Document date :26.03.2008
    Posting Date :26.03.2008
    Asset value date is 01.04.2007.
    Then the system is throwing an error and not alloing to post the previous year transfers.
    Can any one help me out.
    Cheers
    Sri

    Hi,
    I think, if you give old asset value date, system will give you the error.  This may be because, you are trying to transfer the assets with old values, means in your examble the dep. from the 01.04.2007 to 29.02.2008 whould have been charged.
    So, give the current year date means any date from 01.01.2008 to till date.
    If you read F1 help for the value date column, it states,
    Asset value date
    The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. However, the posting year and asset value date year must be the same.
    Since the asset value date can have a direct influence on the amount of depreciation, the system creates a default value when it can. You can specify in Customizing how the the default asset value date is  determined by the system.
    Hope it helps
    Saravanan.A

  • Error on posting vendor invoice

    Hi Gurus,
    Have encountered an error while posting transactions thru idoc. See error below:
    Field Payt Terms is a required field for G/L account ABCD 201101
    GL account 201101 is the recon account of the vendor.  Our entry is:
    Debit Expense   XXX
    Credit Vendor          XXX
    Thanks,
    Ellicec

    Hi:
                   The error could easily be searched on SDN. Its very simple things that system will pop up such error if basic configuration is missing in your field status group for vendor reconciliation account OBC4....your Vendor recon field status group (G067 by standard) ....Payment transactions...Payment term. Payment term has been set as mandatory over there or in posting key for crediting vendor in OB41. So you must enter payment term while entering data in FB60.
    Regards

  • Error while posting journal entry: -5012/unbalanced transaction

    Hi everyone,
    I got this error message when trying to add a FA Retirement.  FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
    FA G/L Account Determination is completely defined.
    Would appreciate any reply.  Thanks in advance!
    Jac

    Hi Jac,
    1, There is a known issue in a lower version before  2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
    21141 error while posting journalentry: -5012 /Unbalanced Transaction.
    If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
    2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
    Account Determination.
    There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
    1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
    2) Select an Account Determination Group;
    3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
    3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
    4) Empty the field 'Default VAT Code';
    5) Execute the Retirement functionality again.
    You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
    I hope it is helpful!
    Regards,
    Ivy Zhang
    SAP Business One Forums Team

  • Error in CJ88  Posting transaction is not possible (value date not allowed)

    When i try CJ88 with a wbs element, it shows the following error :
    Posting transaction is not possible (value date not allowed)
    Message no. AA 478
    Diagnosis
    A retirement was already posted on the asset 000022400733 0041 on 20091231. Based on the value date 20091231 of the transaction, this transaction should have been included in the calculation of values for the retirement.
    System Response
    The transaction is rejected.
    Procedure
    Check the value date of the transaction.
    In need to put year 2009 in date of the transaction, but it isnt posible. ¿Why? I dont know very much about asset accounting...

    Hi
    It is not allowing for WBS element final settlement, because of your asset already retairement was done.
    By best suggetion is, You will create the new WBS element and transfer the all cost line items from old WBS element to new WBS element, then you will try to settlement for another asset in CJ88.
    I hope it will use for you.
    Regards
    PVCPVC

  • Error when posting to CO via RPCATSCO (transaction CAT7)

    Hi to all,
    when using transaction CAT7 (program RPCATSCO) in order to poste data to SAP CO, I receive some error message for some records : here is the error message :
    +Debit/credit indicator is inconsistent
    Message no. F5846
    Procedure
    An error has occurred in the active application. Either the debit/credit indicator must be consistent with the posting key when transferred, or the called application will refuse the transfer of the debit/credit indicator and use the FI-Service to derive it.+
    I alse see that there is a difference between total hours transferred (CATSCO) and total hours correctly posted (transaction KOB1).
    My question is :
    Where can I find the not correctly posted data? Is there a table where I can find all related data to the eroor message?
    Or any detailed report I can use after my posting program RPCATSCO?
    remark :
    As the amount of data transferred is very big, I can't scroll nor check the standard log for wrong documents
    Thanks in advance.

    you can try to run the report RPCATSCO in debug mode by putting /h in the transaction code box on top left and then create a watch point for the message F5846
    see if that helps.
    Sanjiv
    Edited by: Sanjiv Agarwal on Feb 25, 2010 7:58 PM

  • Unbalanced Transaction error when posting delivery note

    Hi Experts
    I am being faced with an error of Unbalanced Transaction when I am trying to convert a Sales Order to Delivery.   I have checked rounding method in document settings and we are rounding by currency.
    Regards
    Jon

    Hello Johnny:
    1.  Overall - Administration > Set Up > Financials > G/L Account Determination > General Tab
    I would suggest getting with your accountant to find out if they used the Rounding GL Account on the Item Group (Administration > Set Up > Inventory > Item Groups > Acccounting Tab) or Warehouse (Adminstration > Set Up > Inventory > Warehouse > Accounting Tab).  Sometimes they use the account for Exchange Rate and other areas...
    Take care - Zal

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error while posting depot excise invoice

    Dear SAP Experts,
    We are continually facing the following error while posting "Depot
    Excise Invoice" on Production sever
    "Error in allocating Depot Invoice number interval not found Number
    object J_1IDEPINV"
    Message no is 8I336
    We have already maintained the number interval for the above object i.e
    J_1IDEPINV with respective series group 62.
    Here is the business process:
    1. First, we make transfer posting thr’ MB1B. We get material doc no
    2. Second, we make selection for RG23D for this material doc thr’ J1IJ.
    RG 23D register gets updated
    3. Third, we make ‘verify/post’ thr’ J1IJ itself. Here we are getting the
    error when we post it.
    Please do needful.
    Its an urgent isue
    Regards
    Tushar

    hello,
    In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
    Regards
    Kedar Kulkarni

  • Error while posting A/R Downpayment Invoice with Excisable Tax Code.

    While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes.
    Kindly provide a solution for the same.

    SAP Note Number: 1179405
    Error -5002 when trying to copy a document with Sales BOM
    In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
    we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
    This note was really helpful and it was found in another query.
    You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
    Thanks.
    Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • ErroR while posting J1IH (TR6)

    Hello Everybody
    I had the following error while posting J1ih.
    Balancing field "Profit Center" in line item 001 not filled
    In FB50 the following entry was posted with profit center PH1000
    PLA On Hold A/C Dr  25000
        to Bank Account Cr 25000
    When i am trying T Code J1IH
    PLA On Hold A/C Cr  25000
    Basic Excise Duty A/C Dr 22000
    ECS                            Dr 2000
    SECS                          Dr 1000
    When i save it the above mentioned error comes.
    Please Help
    Sunil Kumar

    The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
    So somehow it is not getting dervied for the PLA line item. Check the following:
    1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
    2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
    Thanks and regards
    Kedar

  • Error while posting sec.HighEd cess (1%) in J1iin.

    we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount ' 0,10' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    and.....
    System failure during locking GLaccount 1001 by 21150105
    Message no. 8I076
    reply me.  Text Removed
    Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
    Please dont add such comments

    Hey,
    I have already replied to your thread for F5702 error.
    G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
    Regards,
    Brinda

Maybe you are looking for