Error in posting
Hi
Error in posting
error is Posting period 002 2008 is not open??
how to open posting period??
regards
Hello Nikki,
Kindly ask your FI consultant to open period 002 2008.
Once period got open ; you can post payresult of period 02 2008 within this period.
We believe that you want to post payresults of period 02 2008 which are late due to some reason..you can post this results in current open period also.
regards,
Pradeep
Similar Messages
-
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting asset aquisition
Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanujaHi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS -
Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed RoshanThank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan -
ErroR while posting J1IH (TR6)
Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS Dr 2000
SECS Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil KumarThe profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar -
Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
KishoreHi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR -
Error while posting sec.HighEd cess (1%) in J1iin.
we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such commentsHey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda -
Error in Posting Vendor down Payment request
Hi
I am getting an error in posting vendor downpayment request. I am using the T Code F-47 and special GL indicator F.
Error: Special GL Indicator F is not defined for down payments
Message No F5053
Diagnosis: The specified GL Indicator is not classified as "Down payment" or not listed in the list of the target special GL indicators "F"
System Response: The entry is not accepted
Procedure: Enter an allowed special GL indicator or indicate a change of the default settings
I have checked the settings in FBKP. The GL Accounts and properties have been maintained there. The target GL Indicator A is also maintained in the properties. In OBXT also the GL Indicator has been defined. What could be the error?
Regards
Rahul SharmaHi,
What ever the special gl you are created or assigned to K in OBXT are will not allow to post down payment. in FB60 by using these special gl indicators we can post invoice.
Go to OBXR and assign F is for down payment request if it is not there. before assign in OBYR delete the assignment in OBXT. Defaulty the F is used for down payment requests only.
Hope this is clear, if yes assign points, any problem revert me
Regards,
Sankar -
Error on posting vendor invoice
Hi Gurus,
Have encountered an error while posting transactions thru idoc. See error below:
Field Payt Terms is a required field for G/L account ABCD 201101
GL account 201101 is the recon account of the vendor. Our entry is:
Debit Expense XXX
Credit Vendor XXX
Thanks,
EllicecHi:
The error could easily be searched on SDN. Its very simple things that system will pop up such error if basic configuration is missing in your field status group for vendor reconciliation account OBC4....your Vendor recon field status group (G067 by standard) ....Payment transactions...Payment term. Payment term has been set as mandatory over there or in posting key for crediting vendor in OB41. So you must enter payment term while entering data in FB60.
Regards -
Error while posting 561 Document
Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar -
Error In Posting to accounts - PF calculated wrong
Hi,
I am getting error in Posting to accounts- error - Posting balance is not cleared (Period -
Following Wage types are calculated wrong -
Expense
MF90 PF adm chrgs * 1,00,000 = 715,000.000
MF70 EDLI contri * 1,00,000 =6,500.000
Balance sheet
MF90 PF adm chrgs * 1,00,000 = 715,000.000-
MF70 EDLI contri * 1,00,000 = 325,000.000-
MF80 EDLI adm chrgs * 1,00,000 =6,500.000-
/3P2 Professional Tax Basis = 8,387.096-
Symbolic accounts assigned are as standard - no changes made
Please help me solve this.
Thanks in advance.
MonicaHi Monica,
We have solved this issue in our company.
For this you have to create another wage types & make a "PCR" as it divide the 100000 amount from the technical wage types, & then instead of posting the technical wage types post the new wage types u have created.
Don't worry about statutory reports as in there SAP is using some factor which will give the correct value.
Regards,
Gaurav -
Dear all..
I got error at posting 101 movement " Period posting Date is in future adjusted in line with posting date"
Please resolve the pblm..
usefull threads will be rewarded.
Regards
KumarHI,
This should probably be an warning message and not an error message
Pls check and confirm as it sayds that system has adjusted the future date with the dc. date.
If the period is not open then u may have to open the posting period for the said month in MMPI.
Hope this helps.
Regards,
Prasanna
Award pls if helpful
Maybe you are looking for
-
Hi, I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically. Tried manually start services, it started successfully but again goes down within few seconds automatically. Reboot server. but no luck. Any he
-
Cause 1 = 0x82A6 Network out of order - ISDN error
When we are try to make outgoing call, we are getting the below error : cause 1 = 0x82A6 Network out of order Incoming call there is no problem in the Same E1 PRI line, ISP saying there is no problem from thier side.
-
Ipod nano keeps turning off mid song unless plugged into a power source
ipod nano keeps turning off mid song unless plugged into a power source
-
Macbook Pro 10.8 won't shut down. Gray screen with spinning wheel.
Previous it happened on 10.6.8 snow leppord. I thought it might be the RAM problem, so i went ahead and purchased a 16GB RAM. Now I got the RAM up running, i upgraded the computer to 10.8 mountain lion. I thought the problem should be gone by now.
-
Charateristic values as MD of Material
hello everyone, i have a little problem. in our organization, we keep some additional chars. of the material in the AUSP table - Characteristic values (accept of the main chars. which appear in the MARA table). The format of the AUSP table is: materi