ERROR In PR BAPI

Sir,
I'm getting error while executing PR BAPI i.e id delivery date.
but i'm not getting why?.
Please, help me.
Thanks
Manoj.
*& Report ZTEST_BAPI1
REPORT ZTEST_BAPI1.
DATA: BEGIN OF itab OCCURS 0,
      bsart(4),   "Purchase requisition document type
      werks(4),   "Plant
      menge(13), "Purchase requisition quantity
      meins(3),   "Purchase requisition unit of measure
      matnr(18), " material no
      eeind(8),
*      BSTYP ,
      END OF itab.
DATA: itab_bapiebanc LIKE bapiebanc OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF errmsg OCCURS 100.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF errmsg.
DATA: errflag.
CALL FUNCTION 'UPLOAD'
EXPORTING
*   CODEPAGE                      = ' '
   FILENAME                      = 'C:\ '
   FILETYPE                      = 'DAT'
*   ITEM                          = ' '
*   FILEMASK_MASK                 = ' '
*   FILEMASK_TEXT                 = ' '
*   FILETYPE_NO_CHANGE            = ' '
*   FILEMASK_ALL                  = ' '
*   FILETYPE_NO_SHOW              = ' '
*   LINE_EXIT                     = ' '
*   USER_FORM                     = ' '
*   USER_PROG                     = ' '
*   SILENT                        = 'S'
* IMPORTING
*   FILESIZE                      =
*   CANCEL                        =
*   ACT_FILENAME                  =
*   ACT_FILETYPE                  =
TABLES
    DATA_TAB                      = itab
* EXCEPTIONS
*   CONVERSION_ERROR              = 1
*   INVALID_TABLE_WIDTH           = 2
*   INVALID_TYPE                  = 3
*   NO_BATCH                      = 4
*   UNKNOWN_ERROR                 = 5
*   GUI_REFUSE_FILETRANSFER       = 6
*   OTHERS                        = 7
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write sy-subrc.
LOOP AT itab.
itab_bapiebanc-doc_type       =    itab-bsart.
* itab_bapiebanc-short_text     =    itab-txz01.
itab_bapiebanc-quantity       =    itab-menge.
itab_bapiebanc-unit           =    itab-meins.
itab_bapiebanc-plant          =    itab-werks.
itab_bapiebanc-material       =    itab-matnr.
* itab_bapiebanc-BSTYP         =     itab-BSTYP.
itab_bapiebanc-DELIV_DATE     =    itab-eeind .
APPEND itab_bapiebanc.
ENDLOOP.
CALL FUNCTION 'BAPI_REQUISITION_CREATE'
TABLES
    requisition_items              = itab_bapiebanc
*    requisition_account_assignment = itab_bapiebkn
*    requisition_item_text          = itab_bapiebantx
    return                         = errmsg.
LOOP AT errmsg.
IF errmsg-type EQ 'E'.
    WRITE:/'Error in function', errmsg-message.
    errflag = 'X'.
ELSE.
    WRITE:/ errmsg-message.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Requested date (field DELIV_DATE always in the format YYYYMMDD) and date category (field DEL_DATCAT (internal representation, e.g. 1 for current date) or DEL_DATCAT_EXT (external representation, e.g. T for current date))
At least the following data is required:
Item counter (field PREQ_ITEM)
Material number (field MATERIAL)
The following can also be passed on as an alternative to the material number:
Material group (field MATL_GROUP) and
Short text (field SHORT_TEXT) and
Unit of measure (field PREQ_UNIT) and
Price (field PREQ_PRICE) and
Purchasing group (field PUR_GROUP)
If the material number is passed on, the material group, the short text etc., are adopted from the material master record.

Similar Messages

Error message in BAPI call

I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
How to get error message in BAPI call when error occurs?
I can catch an exception in BPM but I need to get error message and send it to another system.

Hi Denis,
>>>I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
if you want to use fault messages
consider using ABAP Proxies
>>>>How to get error message in BAPI call when error occurs?
most bapis have return table in which they
return error messages (you can do it either
in a sync way or in an async way if the call is too long - with corrlelation of course)
Regards,
michal

Error Handling for BAPI MB_COUNT_POST_WITHOUT_INV_DOC for MI10 Transaction

Hi,
Can any one suggest me, how to handle the errors for the BAPI MB_COUNT_POST_WITHOUT_INV_DOC, because this bapi does not have any return table for errors handling? And also suggest any other BAPI which fits for MI10 transaction.
<removed by moderator>
Thanks&Regards,
Damuan.
Edited by: Thomas Zloch on Feb 2, 2012

Hi Dear,
Your answer is very helpful, thanks..!!
But when i am testing with the EIKPF structure, neither error is populating in EIKPF nor the records are posting in MI10. Could you please guess what would be the problem?
Below are the fields that i am passing through this BAPI
1)Document date 2)count date 3)plant 4)storage location 5)item number 6)material code 7) entry quantity
Thanks&Regards,
Damuan.

Error handling in bapi

hi all,
how to handle errors in bapis,and also can anyone send faqs on bapis.

Hi
A BAPI should be able to record and classify all possible errors that may occur a function Module BAPI_MESSAGE_GETDETAIL is used to Handle the Error Messages..
You have to create a parameter named Return for every BAPI. This parameter returns exception messages or success messages to the calling program.
BAPIs themselves must not trigger any messages (such as MESSAGE xnnn) in the coding. In particular they must not generate terminations or display dialog boxes. Instead, all messages must be intercepted internally and reported back to the calling program in the Return parameter. Otherwise the BAPI will not be processed correctly and control may not be given back to the calling program.
All error messages or indeed any message that may be returned by the BAPI, must be defined in message table (Tools ® ABAP Workbench ® Development ® Programming environment ® Messages) and described in the documentation for the return parameter. This also applies to the most important or most likely error messages generated by other programs that can be indirectly passed via the BAPI to the application program.
You must not use exceptions in BAPI interfaces.
When a termination message (message type A) is triggered, a database rollback is executed in the standard programming model, that is, all tasks performed since the last COMMIT WORK are canceled. When you program BAPIs, we recommend that you also execute a database rollback in the return parameter for termination messages. You must describe this process in the documentation for the Return parameter. For messages of type E (error), the calling program performs the error handling.
Application developers are provided with two service BAPIs to diagnose and process error messages from BAPI calls:
BapiService.MessageGetDetail() displays the short and long texts of BAPI error messages.
BapiService.ApplicationLogGetDetail(), with which information in application logs can be displayed.
Features
The export parameter Return can be implemented as follows:
As a structure, whereby it must be defined in the function module as an export parameter, as well as in the method in the BOR.
As a table, whereby it must be defined in the function module as a table parameter, as well as in the method in the BOR as an export parameter.
Before filling the Return parameter you should either initialize the structure with CLEAR or the table with REFRESH and CLEAR.
If the return parameter is not set or is set to an initial value this means that no error has occurred.
The Return parameter may be based on the following reference structures:
BAPIRET2
You must use this reference structure when developing new BAPIS.
BAPIRET1, BAPIRETURN
These reference structures are still partly used in old BAPIs.
Both structures must be filled in the logon language.
Reward if Helpfull,
Naresh.

Passing Error message to BAPI Structure in RFC

Hi Experts,
I would like to know how we pass error message to BAPI structurre in RFC?
Plz some one give the details about how we handle the errors.
Thanks in advance.

Like already mentioned before, every Standard SAP BAPI, has an export or tables parameter which is called something like RETURN with structure BAPIRET2. In here, you can store all the messages that are generated during the BAPI Call.
However, if you also want to catch errors like system exceptions and communication errors, you will have to add these exceptions manually:
EXCEPTIONS
SYSTEM_FAILURE = 1 MESSAGE RFC_MESS
COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
However, not sure if this addition works when calling BAPI from NON-sap application.
Declaration:
DATA: RFC_MESS(128).

Error messages for BAPI

Hello,
Is there any way to get list of all possible error messages in BAPI for BAPI_PO_CREATE1 and BAPI_SAG_CREATE?
I need to prepare check list of all possible error messages BAPI can return while creating PO and Schedulling agreement using BAPI.
Thanks in advance.
Madhura

Try checking the message class used inside BAPI_PO_Create and all the messages in ME21n .
Then you will need to go to this message class and find out al the messages.
But this can go for a long list from 'error for valid vendor numbers, materials , and all the fields etc
Mathews

Error when using BAPI

Please find herewith my below code. This program i have created for transferring goods with mvt type '657' to '555' using BAPI 'BAPI_GOODSMVT_CREATE' for TCODE MB1A.
*& Report Z_BAPI_FOR_MB1A
REPORT Z_BAPI_FOR_MB1A.
Tables : mkpf, mseg, WB2_V_MKPF_MSEG2.
DATA:
it_mb1a LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
it_return LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
it_ex_headret LIKE BAPI2017_GM_HEAD_RET OCCURS 0 WITH HEADER LINE,
it_im_header LIKE BAPI2017_GM_HEAD_01, " OCCURS 0, " WITH HEADER LINE,
it_im_gmcode LIKE BAPI2017_GM_CODE, " OCCURS 0, "WITH HEADER LINE,
mat_doc type bapi2017_gm_head_ret-mat_doc,
mat_docyear type bapi2017_gm_head_ret-doc_year.
*data : lv_intense(01).
data : it_mseg like WB2_V_MKPF_MSEG2 occurs 0 with header line,
       it_cost like csks occurs 0 with header line.
selection-screen begin of block a with frame title text-001.
parameters: p_date type sy-datum default sy-datum.
select-options: so_budat for WB2_V_MKPF_MSEG2-budat,
                so_werks for WB2_V_MKPF_MSEG2-werks_i,
                so_matnr for WB2_V_MKPF_MSEG2-matnr_i,
                so_lgort for WB2_V_MKPF_MSEG2-lgort_i.
selection-screen end of block a.
select * from WB2_V_MKPF_MSEG2 into
table it_mseg where
budat in so_budat and
werks_i in so_werks and
matnr_i in so_matnr and
lgort_i in so_lgort and
bwart_i = '657'.
select * from csks into table it_cost
for all entries in it_mseg where
gsber = it_mseg-werks_i.
*Filling BAPI Header Tables
it_im_header-pstng_date = sy-datum.
it_im_header-doc_date = sy-datum.
it_im_gmcode-gm_code = '03'.
*Filling BAPI Item Tables
loop at it_mseg.
read table it_cost with key gsber = it_mseg-werks_i.
it_mb1a-material = it_mseg-matnr_i.
it_mb1a-plant = it_mseg-werks_i.
it_mb1a-stge_loc = it_mseg-lgort_i.
it_mb1a-batch = it_mseg-charg_i.
it_mb1a-move_type = 555. " '103'.
it_mb1a-entry_qnt = it_mseg-menge_i.
it_mb1a-costcenter = it_cost-KOSTL.
it_mb1a-gl_account = '530089'.
append it_mb1a.
clear it_mb1a.
clear it_cost.
endloop.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header               = it_im_header
    goodsmvt_code                 = it_im_gmcode
*   TESTRUN                       = ' '
*   GOODSMVT_REF_EWM              =
IMPORTING
   GOODSMVT_HEADRET              = it_ex_headret
   MATERIALDOCUMENT              = mat_doc
   MATDOCUMENTYEAR               = mat_docyear
tables
    goodsmvt_item                 = it_mseg
*   GOODSMVT_SERIALNUMBER         =
    return                        = it_return
*   GOODSMVT_SERV_PART_DATA       =
*   EXTENSIONIN                   =
if sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
   WAIT          = 'X'
* IMPORTING
*   RETURN        =
endif.
But when i execute the above i am getting the following error.
Runtime Errors         CALL_FUNCTION_UC_STRUCT
Except.                CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time          27.01.2009 14:43:06
Short text
     Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "Z_BAPI_FOR_MB1A" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
      not caught and
     therefore caused a runtime error.
     The reason for the exception is:
     In the function "BAPI_GOODSMVT_CREATE", the STRUCTURE parameter "GOODSMVT_ITEM"
      is typed in such a way
     that only actual parameters are allowed, which are compatible in Unicode
      with respect to the fragment view. However, the specified actual
     parameter "IT_MSEG" has an incompatible fragment view.
Missing Handling of System Exception
     Program                                 Z_BAPI_FOR_MB1A
Trigger Location of Exception
    Program                                 Z_BAPI_FOR_MB1A
    Include                                 Z_BAPI_FOR_MB1A
    Row                                     72
    Module Name                             START-OF-SELECTION
Source Code Extract
Line SourceCde
   42 lgort_i in so_lgort and
   43 bwart_i = '657'.
   44
   45 select * from csks into table it_cost
   46 for all entries in it_mseg where
   47 gsber = it_mseg-werks_i.
   48 *Filling BAPI Header Tables
   49 it_im_header-pstng_date = sy-datum.
   50 it_im_header-doc_date = sy-datum.
   51 it_im_gmcode-gm_code = '03'.
   52
   53 *Filling BAPI Item Tables
   54 loop at it_mseg.
   55
   56 read table it_cost with key gsber = it_mseg-werks_i.
   57
   58 it_mb1a-material = it_mseg-matnr_i.
   59 it_mb1a-plant = it_mseg-werks_i.
   60 it_mb1a-stge_loc = it_mseg-lgort_i.
   61 it_mb1a-batch = it_mseg-charg_i.
   62 it_mb1a-move_type = 555. " '103'.
64 it_mb1a-costcenter = it_cost-KOSTL.
65 it_mb1a-gl_account = '530089'.
66
67 append it_mb1a.
68 clear it_mb1a.
69 clear it_cost.
70 endloop.
71
72*>>>> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'* 73   EXPORTING
74     goodsmvt_header               = it_im_header
75     goodsmvt_code                 = it_im_gmcode
76 *   TESTRUN                       = ' '
77 *   GOODSMVT_REF_EWM              =
78 IMPORTING
79    GOODSMVT_HEADRET              = it_ex_headret
80    MATERIALDOCUMENT              = mat_doc
81    MATDOCUMENTYEAR               = mat_docyear
82   tables
83     goodsmvt_item                 = it_mseg
84 *   GOODSMVT_SERIALNUMBER         =
85     return                        = it_return
86 *   GOODSMVT_SERV_PART_DATA       =
87 *   EXTENSIONIN                   =
88           .
89 if sy-subrc = 0.
90 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
91 EXPORTING
Can u explain why this is coming. Your valuable suggestions are required.
Thanks,
Jitesh M Nair

Hi,
Try this Code.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          GOODSMVT_HEADER       = WF_HEADER
          GOODSMVT_CODE         = WF_CODE
          TESTRUN               = WL_space
        IMPORTING
          MATERIALDOCUMENT      = FS_MATERIAL_DOC
        TABLES
          GOODSMVT_ITEM         = INT_ITEM
          GOODSMVT_SERIALNUMBER = INT_SERIALNO
          RETURN                = INT_RETURN1.
*VARIABLES for goods movement creation bapi
DATA : WF_HEADER TYPE   BAPI2017_GM_HEAD_01,
       WF_CODE    TYPE   BAPI2017_GM_CODE.
DATA : FS_MATERIAL_DOC   TYPE BAPI2017_GM_HEAD_RET-MAT_DOC,
       FS_SERIALNO       TYPE BAPI2017_GM_SERIALNUMBER,
       FS_ITEM           TYPE BAPI2017_GM_ITEM_CREATE,
       FS_RETURN1        TYPE BAPIRET2,
data declaration for goods movement creation bapi
DATA : INT_ITEM     TYPE TABLE OF BAPI2017_GM_ITEM_CREATE,
       INT_SERIALNO TYPE TABLE OF BAPI2017_GM_SERIALNUMBER,
       INT_RETURN1 TYPE TABLE OF BAPIRET2.
Hope this will help.
Regards,
Rohan.

Sales Order Costing. Error values, need BAPI or Userexit or Enhancements

Hi Experts,
I have a situation to solve the Errors in Sales Order Costing.
My Error is, its not splitting values equally,,, (BOM Item Price Values)
for example...
let i have a parent Item A.
and Child Items as A1, A2, A3.
Now the Qty of A is 100. for each item the price value is 50. so the total value is 5000/-
Now If i need one A, then I need 8 A1's, 4 A2's, 3 A3's.and let think A1 value and A2 value and A3 value (single Unit ) are equal. and let the value be 100.
but in BOM i can see all the values of A1, A2, A3 as same. (500, 500, 500) but it should be (800, 400, 300)
The single Unit Price is not multiplying with Quantity, but its equally splitting.
Please tell me Can I find and BAPI or Userexit or any enhancements or any Configurations to do.
Thanks & Regards
Dileep .C

no replies and my thread was dead.

How can I catch a error in a BAPI?

Hi,
I use BAPI L_TO_CREATE_MULTIPLE. If, for example, I put a warehouse that not is the warehouse of the unit that I want to move, I receive an error that isn't in exceptions.
In the program, I need, in the sy-subrc, catch this error, to do anything.
In this case, the message is L3208.
Thank you very much.

Hello Jose
BAPIs must not raise any exceptions. Why? Because they are intended for external use. However, if you raise an exception during a RFC call the connection will break down. Therefore BAPIs collect the error message in their (usually named) RETURN parameter.
In order to evaluate a BAPI call you can simply code like this:
" Assumption: RETURN parameter is an itab of type BAPIRET2
LOOP AT return TRANSPORTING NO FIELDS
WHERE ( type CA 'AEX' ).
EXIT.
ENDLOOP.
IF ( syst-subrc = 0 ).
" A(bort), E(rror) or X(dump) happened
ENDIF.
Regards
Uwe

Error while defining BAPI method in the BOR

Hi all,
I am following a document and trying to learn BAPIs. Now, after an object type is created through SWO1, from Utilities -> API Methods -> Add Method, I am asked to enter a function module name. Shouldthis FM be already existing one? When I gave some name there and entered, it's giving an error
BAPI : BAPI function module ZBAPI_GET_BILL_ITEMS has no return parameter
Diagnosis
The system checks that the RETURN parameter has been defined in both the BOR and in the function module. The parameter must refer to one of the BAPI return structures (all planned reference structures can be used for BAPIs up to and including Release 4.6B; but from Release 4.6C only BAPIRET2 can be used).
The BOR parameter must be type EXPORT (one line or multi-line) and the function module parameter must be type EXPORT (if one line) or type TABLE (if multi-line).
Procedure
Create a RETURN parameter for the function module. Also define the reference of the BOR parameters to the function module parameter in the BOR ("Name in function module").
Note that only incompatible changes can be made to BAPIs already released and delivered.
Find out about enhancing or modifying BAPIs that have already been delivered by calling the BAPI Explorer (Tools -> BusinessFramework -> BAPI Explorer) and reading the project form "Project to change an existing BAPI".
Can anybody help me out, please?

Hi ,
In the export of that fm u have to give this.
parameter name typing associated type
RETURN TYPE BAPIRETURN
Regards

Error while calling BAPIs for DMS from Portal

Hi everybody,
We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
does anybody knows the meaning of this message?
by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
thanks for any information, Adi.

Hi Adi,
Right now I have a similar problem. Did you find the cause/solution?

Error while calling BAPIs of DMS from Portal

Hi everybody,
We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
does anybody knows the meaning of this message?
by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
thanks for any information, Adi.

Hi Adi,
Right now I have a similar problem. Did you find the cause/solution?

Error while using BAPI BAPI_GOODSMVT_CREATE for Momvent type 321

Hi Guys,
We trying to transfer material from Inspection to Un.Stock by using momvent type 321...In SAP we do QVM1 and do stock postion.
We are using BAPI BAPI_GOODSMVT_CREATE getting this error " E QA 495 Change the inspection stock of material 11036125 in QM only".
Any one have any idea how to overcome this issue.
Atul

Hi Sachin,
Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
Regards
DKS

Error while posting BAPI BAPI_PO_CREATE1

Hello All,
I am getting the following error while creating the purchase order through BAPI as
No instance of object type PurchaseOrder has been created. External reference:
Can somebody has the idea what exactly is the error.
Thanks
Jatender Narang

Hi,
This error means that the purchase order has not been created yet. Its a general error meaning that the instance of the object has not been created.
Is this the only error which you get?
Please check your return table.
It will contain other errors too.
Regards,
Ankur Parab

Error while using bapi BAPI_INCOMINGINVOICE_CREATE to post MIRO

Hi Friends,
         Im using bapi BAPI_INCOMINGINVOICE_CREATE to post MIRO.
         im passing data to table GLACCOUNTDATA.
         Below are the table fields im paasing
     INVOICE_DOC_ITEM " '000001' deafault always
     GL_ACCOUNT "Which is constant for all in my case
     ITEM_AMOUNT      " Total PO net amt + Frieght charges header level
     DB_CR_IND      " 'S' always default
     COMP_CODE      " 'RPPL' always default
     TAX_CODE      " 'V0'     deafault always
     PROFIT_CTR       " for ex 1100180. based on plant
          While posting this bapi is trhrowing error as below
     'profit centre RPPL/1100180 does not exist for 01.12.2008'
     where 01.12.2008 is the MIRO posting date which im passing in header.
        We checked dates for profit centres they are correct.
        Awaiting the reply ASAP.
Regards,
Venky

Hi,
It would be better if you do a recheck on data input for BAPI. If you sure the data are ok but the BAPI still gives error message, then I suggest to post to OSS.
Regards,
Teddy Kurniawan

ERROR In PR BAPI

Similar Messages

Maybe you are looking for