Error in Preview Window and exported project/film

Hi!
Everything is fine in the canvas window of my Motion1, but the project windows showing up all destroyed, also the exported clip.
It has nothing to do with my files. Even when I open a layout from motion, in the project window, each little file shows up destroyed. But not in the canvas, where everything is fine.
I reinstalled the quicktime related .pkg files and motion. Running a ati radeon 9800, which I guess might be damaged, or does anybody has another idea?
-Tom

don't have any suggestions, but sounds similar to my problem...
http://discussions.apple.com/thread.jspa?threadID=347680&tstart=30
meanwhile after reinstalling motion I cannot do the motion update...... an error occurs...
I think there might be some 10.4.4/motion conflicts on my powerbook...

Similar Messages

Can not open lightroom 3.6 it shows error reading preview cache and closes what can i do. it does not stay open long enough to do anything

has anyone had an issue that lightroom has error reading preview cache and closes immediately. what can i do to correct this

Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace

I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.

I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.

Preview Monitor and Exporting Quality Issues

Hello, in a previous life I was a video editor from the world of Avid and I just picked up Premiere for an emergency side mission at my current place of employment and I have run into a couple issues with CS4.
1. The preview monitor for the Sequence displays a lower quality of the video that comes from the uploaded Clip and it also does not play back at a steady frame rate. However, when I look at the Clip in the secondary preview monitor that is reserved for clips, titles, etc, the video quality is as high as what is expected. How do get the sequence monitor to playback at the quality the clips are uploaded as and how do I get the playback to do so at a steady 30fps?
2. My exporting experience was based around dubbing directly to Beta tapes and I never really had to do any digital file exporting. I need some tips on what to export a Sequence as that will retain a high amount of the quality while also keeping the file size to what will fit on a disk. The video length in this case would never be more than 5 minutes as I am only working on sales videos. Also, the file needs to be playable in Windows Media Player.
Thank you in advance for any help on these issues.

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Error Message in FCPX when exporting Project to DVD

I am running Final Cut Pro X version 10.1.4 on OS X Yosemite (recently updated to this). Burning 2 Projects to DVD, one was successful the 2nd failed to burn at 33% complete with error message: Com.Apple.Compressor.CompressorKit.ErrorDomain error-1. Any ideas why this is and what can I do to rectify problem?

Let's see if you get the same error message on another project. Create a new event and import a short clip. Add that to a new project. Share>DVD and change the output device to Hard Drive. Does the export complete?
f it does not, create a new user account and try the same (or similar) test as above from that new user account.
Russ

Error message when trying to export iMovie film to iDVD

It says "unkown error" and that i should check to see if iDVD is installed properly. I think it is. Also, it says check the disk space which I have and is fine and also write permission which I have. It still won't let me export it.

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

Itunes 11.1.4 is bringing visual error in my windows and could not be installed correctly...

Itunes is losing feathers more and more with each ^upgrade~ 11.1.4 is unable to install on my computer...

Hello Neiksl,
Thank you for the details of the issue you are experiencing when installing iTunes. I recommend following the steps in the article below when getting an error message trying to install iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

23.976 fps and exporting to film ...

dear all ...
i have a project that shot on RED with 23.976 fps ... the final out put will be to film ... so what is the right workflow to do so? can i work directly on this frame rate or i should convert to 24 fps? or i just export to DPX with 24 fps settings? if i want to convert 23.976 fps footage to 24 fps, what should i do? just use interpret footage?
thanks for co-operation

> if i want to convert 23.976 fps footage to 24 fps, what should i do? just use interpret footage?
If you interpret a 23.976fps movie as a 24.000fps movie, then it will play 0.1% faster, but the images will all be original frames (as opposed to retiming the movie such that it plays at the same rate but with interpolated image information to fill in the in-between frames).
That is often fine. You'd need to make sure to retime your audio by the same amount.

Jumpy preview, render and export why? (Premiere Pro CS3)

Hi guys, When I try to import a small video that I took in my Sony CyberShot Camera DSC-S600 (in avicodec) it says my video is:
MPG1 = MPEG1 (VCD).
Resolution = 640 x 480 25fps.
If I just import that video, drag it to the timeline (below), and press ENTER, It will start rendering it without any effect that I've made, and in the playback it will like jump some frames in and out (some in reverse and then forward).
Also If i just import the video and make a playback, it will do the same, if I playback the video outside the premiere pro cs3 it will run just fine as it should be.
My computer is a A64 3800+ 4GB RAM DDR2 800mhz, GF7600 gt 256mb is my video card.
(the video I'm importing is only 16mb).
Part of the video can be located in youtube, (see link).
http://www.youtube.com/watch?v=-_73D3Rdbqk
It was saved in avi, then uploaded to youtube.
please help me.

> "...much anything that "also does" video really isn't the right tool for the job..."
If the camera video can be converted to Pro video, then it can be considered "the right tool." Jim, there are a plethora of situations where a compact still camera that shoots video is the right tool. It's your subjective definition of "the right tool" that begs up on an old paradigm. A fictional character, McGyver, never seemed to have the right tool for the job. In fact, the entire idea of invention is to create
i or adapt
the right tool for the job.
That the misinformed come here with questions does not relate. Many more are informed, take the appropriate steps and proceed to tell the story. And move people. Or get paid.
For example: I use a still camera that also shoots video as a tennis instruction tool: A one hour tennis lesson involves recording the various tennis strokes, performing a few quick edits, and placing the results on DVD for the student(s). According to you, I should bring a tripod, a bulky mini-dv video camera, etc. I should take the time to set up the equipment, before my students arrive. I should also take time to move the tripod to capture the various different angles. After the lesson, I should take time (excuse me, real-time) to capture the mini-dv into Ppro and edit.
To me, the video camera is the wrong tool for this job. Instead, I whip out the still camera that also shoots video, walk around to get the angles, shoot the specific strokes requested. Oh-and as a perk, I can take several high resolution still photographs, with a single knob turn. Back in the studio, I dump the clip files on the timeline, w/o real time capture. And I edit.
Students love the video (they don't care/can't tell about the reduced quality--they're interested in their strokes), and they
i also
appreciate the stills.
If I were doing documentary or broadcast, a still camera that also shoots video would be a poor choice indeed. But, here, I'd be stupid to bring both kinds of cameras. However, before the CEs intervened and created just the right tool, I had to bring both. And I hated it.
It's a paradigm shift, Jim. You might not be able to understand it if you suffer from perceptualsclerosis.
And now the CEs have my mouth watering, with EX-F1. Blur the line.
Keep Smiling

Recent issue on multiple PCs: Preview and Export flicker/banding/moire effect

Recently we discovered one of our PC's flickering and banding in the preview window during playback and on exports. Shortly thereafter, the same issue appeared on another workstation. What we are seeing is a variation of issues that include but are not limited to the following within the preview window and more importantly in our renders:
Flicker - Video changes in brightness
Moire effect - Can see a cross-hatch pattern during playback
Banding - You can clearly make out horizontal or vertical lines, or sometimes both.
Seeing layers beneath 100% opacity layers. When two layers are stacked with footage, you can see the footage below as if the top layer is at 97% despite the actuality of it being at 100%.
These issues exist on multiple machines with differing specs, in all projects. This is neither a project or machine-based issue. All effects removed from clips within the timeline; source footage looks great in standalone player. These issues occur with a new project with a blank color matte.
Just spent 3+ hours in live chat with an Adobe Rep who remotely team-viewed to see the same issues testing project base solutions to no avail. Everything was tested from render containers/codecs, local vs server, project managing, cache clearing, etc. These same projects did not exhibit these issues a week ago.
All of these situations lead me to believe that this is a Premiere issue, something changed with how Premiere is handling our files and this is a huge issue. We are unable to deliver finals to clients due to this problem.
Ticket # 0185909669

Ran some tests. Wiped everything with Creative Cloud Cleaner Tool. Reinstalled the previous iteration of CC (not 2014), version 7.0.0 base. The issue exists here as well. Updated it to 7.2.2, same thing. Wiped everything again with the cleaner tool, installed CC 2014 Base, 8.0.0 and had the same issue, updated to current version no difference. These issues did not always exist, this is of recent coming.
We are running multiple Windows 7 and 8 machines at 64-bit. Their hardware varies per computer and all produce the same results.
We are having to make all renders from ONE mac that does not exhibit the symptoms described in the first post. This is HUGELY restricting to our business and we are having to wait on queues of renders to deliver due to this.
Exact same issue in post here: Re: Weird Horizontal Interference in Exported Video (check out the YouTube link)
HELP!!!

"Build and Export Cache" fails to export 100% Previews:

"Build and Export Cache" fails to export 100% Previews:
I am moving from Bridge CS5 to CS6 and have a very large number of 100% Previews in my CS5 cache. The idea of regenerating all these 100% Previews in CS6 is NOT amusing. It is amazing that there is not a simple import function for this task as a way to make the software upgrade more "seamless"… but apparently there is not.
I have read the Adobe documents:
    "Bridge Help / Manage the cache | Adobe Bridge CS4, CS5"
    "Creative Suite / Work with the Adobe Bridge cache"
Based on these documents, in Bridge CS5 I used the export function in
Tools>Cache>Build and Export Cache…
    with "Build 100% Previews" checked
    and "Export Cache To Folders" checked.
Unfortunately, the "Build and Export Cache" fails to export 100% Previews to the target directory. They should appear in the target directory as hidden files in the format xxxxx.NEF.JPG. Yes, I do know how to view hidden files in both the Finder and in Bridge.
In Bridge CS5 I tried Purging and rebuilding the Cache for the target directory with no luck.
I tried running "Build and Export Cache" in Bridge CS6…. still no hidden Preview files in the target directory.
My settings in both CS5 & CS6 Bridge - Preferences:
    "Keep 100% Previews in Cache" is checked
    "Automatically Export Cache to Folders When Possible" is checked
My settings in both CS5 & CS6 Bridge - Options for thumbnail quality and preview generation:
    "Generate 100% Previews" is checked
Using OS X 10.6.8
Anyone have a suggestion?????

Bridge is the only piece of software I have used, which incorporates a database, where new versions do not provide for importing the objects of the older version. Very strange.
That is a very mildly conclusion but unfortunately until the cache strategy for Bridge is finally sorted out this problem will exist.
Now I have to confess that I can't use the 'Auto export cache when possible' for several versions now due to a rare problem that after the first time usage without problem created export cache almost every second time generates a warning message that due to failure it needs to replace the Cache T file, hence I deselected this option permanently.
I would think that if you have those already cached and exported files for 100 % preview in the dedicated folders it would read those files and add it to the database and central cache file when having pointed Bridge to that folder, but I'm far from sure about that.
Also after rereading your first post you state to expect the build and export cache to build also hidden files with the two extensions from original filetype followed by .jpg from cache in the folder itself (target directory)? Here I'm a bit lost. The mentioned double extension files only appear in the central cache folder and are visible but buried in the subfolders for each quality in the central cache file at user library (default) or custom set location in Bridge prefs.
The exported cache to folder are hidden files and as long as I can remember that where 2 files already in the File browser (forgot the extension they used for this) and currently .BridgeCache (very small, few KB) and the for me problematic .BridgeCacheT file that can grow very large and has about the same size as the subfolder generated under full in the central cache.
I can see the content of the central cache without problem including the double extensions and previews of the files as thumbs in the Finder, jet with option to show hidden files I can see the CacheT file but only as a blank document icon and I can't find an application on my system to open this file to reveal its content.
Just tried it on a folder with small sized files and having set preview quality to HQ and 100 % preview (checkerboard icon in Path Bar) and then used the option from menu tools to build and export cache to folder including 100 %. Both subfolder in Central Cache and about same sized hidden CacheT file where generated without problems and the full preview was instantly on demand using magnifier. (but all this without the option in prefs to auto export to folder)
So to me it seems (if I understand everything correctly) that either the existing exported files from CS5 do cause the problem or your setup of CS6 is not working correctly.
Are we still on the same track or am I completely lost?

Can you disable the print preview window from firefox and how?

I would like to disable the print preview window and be able to click print once. I don't have the firefox symbol on the top left of the window. Can someone please give me the steps to change the settings?

You can look at this extension:
*Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/

Log and Transfer - loss of preview window

I have managed to make the preview pane in the Log and Transfer window disappear and I can't work out how to get it back.
To expand the left hand side of the L and T window I dragged the right-hand side divider towards the preview pane. As the divider started to overlap the preview area the pane disappeared never to return even though I have tried dragging the divider back again from the right side of the L and T window.
Does anyone know how to get it back?
Thank you.
John

Thank you.
I know what you mean and can see the Logging and Import Settings boxes you describe in FCP running on a different machine but on my Macbook the whole right hand side of the L&T window has gone, including all the logging data entry places below the preview area.
If you wanted to mimic this try dragging to the right the divider between the list of clips on the L&T window's left side and the logging area on the right. You will see the preview window and logging area disappear before you've dragged very far. If you let go of the mouse button at this point they seem to disappear for good, or at least as far as I can tell. I don't recommend letting go though as I can't find any handle to grab so I can't find or drag the divider back to the left to reinstate them.

Error in Preview Window and exported project/film

Similar Messages

Maybe you are looking for