Error in pricing procedure for PO

Dear users,
I have run into a problem in pricing procedure for PO.
In the access sequence for pricing, the second access has condition based on country of customer (third party Sales order process) and third access has condition based on Info record.
When the PO is created, the system sees the record for second access, but does not insert it. In the analysis, it gives the message that "condition record found but not set (108(VE)). Instead it puts the price from Info Record (third access).
However, when i update the pricing in the PO in the conditions tab, it finds the record  in second access and puts it.
The condition record was created before the PO, and i have tested multiple times after the creation of condition record in MEK1.
Any ideas why this would happen?
Thanks
Nitin

Hi
In the Access sequence maintain the Table sequence as exclusive for the Second access... This will ensure that if the Condition record is found it will adopt that.
Please check if your PO Qulaifies for the Second access or not.
Whether it is a third party Sales order & Check the Customer data & Country
Thanks & Regards
Kishore

Similar Messages

  • Excise Pricing procedure for Stock Transport Order in MM  with TAXINN

    I am an SD guy running STO  from manufacturing plant to sales depot
    AND not able to create JEX proforma excise invoice from NL
    to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB  means configuration is ok
    BUT base amount in J1IS is coming as zero because of missing excise conditions in MM  STO pricing procedure
    CAN anybody give me a sample EXCISE pricing procedure for STO
    AND  do i need to create records for the condition types in FV11 OR  MEK1 please clarify
    I know that calculation type 362 attached to BASB in TAXINN has something to do with this
    I am able to see chapter ID in J1IS
    And the relation between condition types in TAXINN and excise pricing procedure for STO
    And I am able to create excise invoice in J1IG with zero excise values
    I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
    I think my explanation is sufficient enough
    please give A sample of TAXINN

    Hi Yoga,
    Here u not need to do VL10b.just follow this steps and try.
    In PO,Document type is UB and Item Category is U.
    After creating PO,In MB!B with reference that PO number and using movt type 541
    then u can see that stock in Transit.Now u do GR with respect to PO number.
    Thanks & Regards
    Suresh.
    > Hello MM Gurus,
    >
    > I am doing Stock transport order between 2 plants
    > under same company code.
    > I have maintained all the required settings.Following
    > is the process flow.
    >
    > 1.Creation of Purchase order with document type
    > UB.(ME21N)
    > 2.Creation of outbound delivery with respect to
    > Purchase order.(VL10B)
    > 3.Post Goods Issue from the supplying plant. (VL02N)
    > 4.Creation of Excise Invoice in supplying plant.
    > (J1IS)
    > 5.Goods receipt at the receiving plant.(MIGO)
    >
    > While I am doing Goods receipt in the receiving
    > plant, system is giving an error
    > message "Maintain Vendor for the Excise Invoice" -
    > Message no. 4F185.
    > Why this message is coming and how to resolve this?
    >
    > Thanks & Regards
    > Yoga

  • Pricing procedure for billin

    Hi,
           How system copies pricing procedure from sales document to billing document

    as you know pricing procedure is determined by
    sales area + doc. pricing pro. + customer pricing procedure
    document pricing procedure will come from sales document types and Billing Types.
    customer pricing procedure will come from customer master
    Between the sales document and billing document the only factor that could change is the document pricing procedure
    If they do not differ the same pricing procedure would be used and the control would be as per the configuration given in the copy controls.
    If they differ then new pricing procedure determination will be carried out but for that in copy control we need to maintain PRICING TYPE AS B carry out new pricing else it will give you error saying pricing procedure could not be determined

  • Pricing procedure for Excise

    HI,
    I maintained Pricing procedure for Excise with the combination of SODISDIVCUS PPDOCPP and i maintained* JINFAC*.......now i would like to maintain customer line item wise discount.but that condition type in DIff pricng procedure.........How can i combine these two pricing procedures .
    Plzz revert me back if you need more clarity
    Regards
    Lucky
    Edited by: lucky on Oct 22, 2008 7:13 AM

    Hi,
    I maintained Pricing procedure JINFAC for combination of Sales areaDOC PPCusPP.....
    iam getting all Excise duty and all..........but i would like to add Customer Discount.K007 condition type......Not only discount ......for Example...100% Discount Etc....
    But it is not in JINFAC PP.....i tried to maintain RVAA01 for same combination (Which i maintained for JINFAC) but system is giving error.
    How can i club 2 PP for same sales areaDOC PPCUS PP
    Thanks in Advance
    Regards
    Lucky

  • Pricing procedure for singapore

    Dear Experts,
    Can anyone provide the pricing procedure for singapore in detail.
    Thanks & Regards
    Dominic Rajan

    Hi,
    I maintained Pricing procedure JINFAC for combination of Sales areaDOC PPCusPP.....
    iam getting all Excise duty and all..........but i would like to add Customer Discount.K007 condition type......Not only discount ......for Example...100% Discount Etc....
    But it is not in JINFAC PP.....i tried to maintain RVAA01 for same combination (Which i maintained for JINFAC) but system is giving error.
    How can i club 2 PP for same sales areaDOC PPCUS PP
    Thanks in Advance
    Regards
    Lucky

  • New tax code creation and pricing procedure for Sri Lanka

    Hi,
    I have one company code in India..Now I have requirement to create new plant under different company code in Sri Lanka.
    Can anybody tell which tax pricing procedure is to be defined for Sri Lanka and what are different steps involved in the creation of new tax code for Sri Lanka.
    Thanks & Regards
    Sunil Singh

    Hi Mr. Biju,
    Thanks for reply...
    Enterprise structure has already been decided. Everything we have copied from India for Sri Lanka and working fine except below error.
    As I have already mentioned that I have copied tax pricing procedure for Sri Lanka from Taxinn then assigned to country code LK (Sri Lanka). I have created new tax code for LK (Sri Lanka) in FTXP then I have assigned the tax code with company code in SPRO Logestic General--- Basic settings.
    After completeing this config, system is showing error" tax code is not defined to company code" in MIRO.
    Please suggest...
    Thanks & Regards
    Sunil Singh

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

  • Excise duty in the Pricing Procedure for Local Purchase / Importation

    Hi,
    I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
    Local purchase:  the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us..  My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
    Importation:  the vendor only bills us the cost of the material.  When we received the fuel, we paid ED tax to local tax authorities.
    I know that both in these scenarios, the system has to determine the excise duty.
    My questions are (1) how do you set up the excise duty condition type  in the pricing procedure(or do they have to be maintained in the pricing procedure?) ?   and (2)  how do you set up this condition type in the config?
    Thank you and hoping for your immediate feedback.
    zccr

    Hi,
    You can use same pricing procedure
    put 4 in subtotal in pricing procedure against the Discounr or freight cond
    and in taxinn
    BASb ALTCBV 362 and for jmop 363
    But this will work only if same  discount or freight value is in IV as that given in PO
    if freing value changes in IV then its a problem
    This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
    other solution
    in taxinn create tax code like v8 vat 4% for 003 tax clasification
    in ftxp create tax code V8 desc vat 4%
    in fv11 for jvrd put 4
    and at the time of IV put this tax code for freight amount
    and for regular material value V1 tax code
    this will work only if u have used acess seq MWST instead of JTAX pr JST1
    hope this helps
    Vipin

  • Different Tax base in pricing procedure for a single sales order for different line item material.

    Hi,
    I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
    Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to)  is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
    Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
    Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
    Kindly suggest a suitable way to handle this scenario.
    Regards,
    Aashika Agarwal

    Hi,
    Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
    If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
    SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
    Hope this helps.
    Regards,
    Palani

  • Error while executing procedure for excel upload

    Hi Friends
    Pl. find below error while executing procedure for loading excel data. pl. verify and suggest for any changes in the format of data.
    Rgds
    SriG

    If reading Excel as a database you would use "Access LSLINK"
    Access external means you are reading a file. I don't think it is possible to treat Excel as a file because the internal structure is complex.
    In the past I have saved the Excel as a CSV or as a Tab delimeted file. Then I use something like
    ACCESS External
      USE &filename
      BEGIN
        DESCRIPTION free ,
        Variables text 20
        Organisation text 20
        'July 2008' numeric 20
        'August 2008' numeric 20
        'September 2008' numeric 20
        'October 2008' numeric 20
        'November 2008' numeric 20
        'December 2008' numeric 20
        'January 2009' numeric 20
        'February 2009' numeric 20
        'March 2009' numeric 20
        'April 2009' numeric 20
        'May 2009' numeric 20
        'June 2009' numeric 20
      END
      peek
      read
    ... quit the access sub system
    END

  • Pricing procedure for order with reference from order

    Dear Friends,
    If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too.
    But I would to use another pricing procedure for second document
    I found the oss note 14136 but this is for reference from invoce
    I tried to create new data transfer routine for orders in copy from 51, but does not work
    Can you help me??
    thanks
    best regards
    GdA

    > If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too. But I would to use another pricing procedure for second document,
    Based on my understanding of query.
    You are looking for a different pricing procedure in second doc.
    For instance, the PricProc for SalesDoc1 is ZPR001 and  the PricProc for SalesDoc2 is ZPR002, in addition to that, you want SalesDoc1 to become reference doc for SalesDoc2.
    For this, ZPR002 & ZPR001 should have common base price condition type and rest pricing can change.
    And for maintaining different Pricing Procedure with similar combination of sales area for SalesDoc1 & SalesDoc2, maintain different document pricing procedure for both docs and maintain Pricing procedure accordingly..
    Thanks & Regards
    J Prakash

  • Pricing procedure for Credit Memo request WITHOUT reference

    Dear friends,
    I have come across a requirement where credit memo request has to be created without reference to preceding document. i.e. for just giving some credit to customer may be for over pricing or giving some credit to customer (as to maintain good relation).
    So generally we have different pricing procedure for Cr/Dr process.
    thus i have different pricing procedure for Cr/Dr process than normal sales process.
    here i have copied pricing procedure of normal sales and added extra condition type for manual pricing, which overrides basic pricing condition type.
    but calculate the discount and taxes on the manual price.
    I would like to know whether discounts and taxes condition type's should be used
    in the cr/dr process without reference to preceding document. and suggest me the right condition types to be used in cr/dr pricing procedure without reference.
    Thanks.

    HI,
    Remove all the other condition types from the procedure and keep only those which you need.
    Regards
    Abhilash

  • How to create the pricing procedure for domestic & import.

    HI,
        Pls any body let me know how to create the pricing procedure for domestic & import.
    what is the use of the keys
    step condiiton condition type from   to  manual required statistic   subtotal requirement caltype basetype.
    how system will work based on this.

    Hi,
    Please see below WIKI for your reference:
    http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
    Regards,
    Ninad Kshirsagar

  • 2 pricing procedures for the same sales area

    Hi Gurus.,
                  My client requirement is the client requires 2 pricing procedures for the combination of Same sales areaDEocument Pricing procedurecustomer pricing procedure in OVKK
    He doesnt want to use new sales area or new document pricing procedure or new customer pricing procedure,I know that in standard SAP it is not possible.
    Can any of the gurus throw some light on this.Some work around is required here,So can u please say the required changes in Standard functionality.
    Thanks & Regards
    Narayana
    Message was edited by:
            manam narayana
    Message was edited by:
            manam narayana
    Message was edited by:
            manam narayana

    Hi Gurus.,
                   First of all thank you very much for giving me so tremendous response, But my client requirement is,
                  He has one customer and for that customer when raising an order ,for some orders Tax shouldnot caliculate and for some orders Tax should be caliculated,
            For example :  If he gives price 100,Then the base price should be 100,For some orders he  gives price as 130 rs which is inclusive of tax like 110 should be the base price and 20 rs tax should get caliculated
               So i have tried in the pricing procedures and we have standard pricing procedure RVAA01 & RVAB01 ,In which RVAB01 is the price inclusive of tax procedure,We can assighn different pricing procedures if any of the combination in OVKK is changed,But he dont want to change the combination in OVKK.
            So client asks now when he raise an order he decides how the price should be caliculated, i.e the price may be he give price or price inclusive tax,of which the pricing procedure should automatically split the tax and price accordingly,He is asking in the way like when we raise a sales order we should do like a pop up box should appear asking which pricing procedure should be selected,So on selecting the pricing procedure the order should caliculate based on the selected pricing procedure
    Thanks & Regards
    Narayana

  • Pricing procedure for the calculation of VAT

    Dear all,
    We require one new tax structure.
    Assessable value + service tax & VAT for the sum of Assessable value + service tax.
    Kindly give us the pricing procedure for the above requirement.
    Regards
    Mahalingam sarathi

    >
    Mahalingam Sarathi wrote:
    > Dear all,
    >
    > We require one new tax structure.
    >
    > Assessable value + service tax & VAT for the sum of Assessable value + service tax.
    >
    > Kindly give us the pricing procedure for the above requirement.
    >
    > Regards
    >
    > Mahalingam sarathi
    Let me try to fit in this requirement for you (with a small demonstration, you will also have to use the appropriate accounting keys)
    400           assessable value  350 390 
    410 JSRT  Service tax            400
    420 JEC3  ECEss on Srv tax   410
    430 JSE3  Secess on SrvTax 410
    440           ***. val + Srv Tax 400  430
    450 JIVP   VAT                        440

Maybe you are looking for