Error in Prime Infrastructure 2.0 after Controller upgrade

Hello
I've got two WiSM and Prime Infrastructure 2.0. Last week I upgraded one WiSM to 7.0.250.0, plus a third controller. That worked fine, but since then, my PI shows one of the two controllers of the second WiSM as "Unreachable". I rebooted the PI and also rebooted the controller again, to no avail.
I tried now to update the snmp v2c credentials in PI, but receive an error.
The error message shown when I try to update the credentials is:
Error: Common-1: Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
Error:Detail: errorId=6 Invalid credential name: snmp_transport.
Any ideas?
I can normally access the controller through its webinterface and don't see any errors that would spring to the eye.
[edit]
Just manualy run the Task "Controller Operational Status" and received this error:
com.cisco.wnbu.server.common.errors.InternalException: COMMON-1
Thanks
Patrick

I worked with TAC Team and the final solution was to delete all controllers and add them again. This might get fixed in a future version though.

Similar Messages

Error in SM59 TCP/IP connection after kernel upgrade to 215..

Hi
We recently upgraded our kernel to patch 215(NW 7.0)..
We built the kernel by first taking the entire kernel stack( level 201) and then patched it with dw, enserver, lib_dbsl, tp, r3trans, r3inlpgm, saposcol with level = 215 except for lib_dbsl, which is 214 and enserver which is 207...
After the upgrade to this new level, we have a SM59 TCP/IP connection which calls an RPG program located in /qsys.lib/..(start on application server radio option), which has stopped working...
Now this RFC doesn't work anymore...
When we test it, it shows us the following:
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapdev.ny..... / sapgw00
Error Details     DETAIL: no connect of TP /qsys.lib/rtcimo.lib/RFC000.pgm from host sapdev.ny.....
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1537
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6255
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Aug 18 23:09:46 2009
Error Details     VERSION: 2
We have another system in which tp is at patch 169 and it works fine...
Looks like something changed with the kernel/tp patch...
doesn't show anything in the sm21 log..in the work process log for dev_rd..
MtxInit: -2 0 0
Mon Aug 17 16:00:47 2009
GwDpInit: attached to gw_adm at 70000008059bae0
DpSetProcessPriority: Run priority for gwrd adjusted to 12
Tue Aug 18 14:35:09 2009
ERROR => GwISearchPartner: timeout, partner LU: >%%SAPGUI%%<, TP: >saphttp< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: %%SAPGUI%%, conv ID: 22575469 [gwr3cpic.c   6225]
Tue Aug 18 17:25:25 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny....., conv ID: 32824524 [gwr3cpic.c   6225]
Tue Aug 18 17:29:30 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33074744 [gwr3cpic.c   6225]
Tue Aug 18 17:40:29 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33722803 [gwr3cpic.c   6225]
Tue Aug 18 22:52:39 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
Tue Aug 18 22:52:40 2009
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 52504488 [gwr3cpic.c   6225]
Tue Aug 18 23:09:46 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 53534925 [gwr3cpic.c   6225]
Has anyone seen anything like this??
Please let us know..
Thanks
sap ques...
Edited by: sap ques on Aug 19, 2009 5:23 AM
Edited by: sap ques on Aug 19, 2009 5:25 AM

This error may be due to kernel patch level. You can try some other patch level. If you can raise an OSS message with SAP, they can tell you exactly which Kernel patch will solve your problem.

Prime Infrastructure and WLAN Configuration Controller Templates

Hello,
I work with PI v1.2 in customer environment. This app has SNMP relation with 7 controllers (4 controllers in 2 WiSM modules, 3 controllers are standalone). All controllers uses WLANs which I sometimes need to update. I would like to use the PI so that update all of them in one step. But when I use WLAN Configuration Controller Templates and choose given WLAN Template then the PI answer me with error message: "Unknown Exception Occured. If the problem persists send logs to the Tech Support."
Have you anyone had such a problem? Is it any bug of the application?
Thank you.

Yes, you should be able to discover templates from the WLC
HTH,
Steve

Errors in Unity 4.2(1) after OS upgrade to Windows Server 2003

I upgraded our Unity VM only server to server 2003 and reinstalled Unity 4.2(1) and restored untiy from backup. After the restore there are multiple errors in the Application log. I have engaged two different Cisco TAC people and neither of them could help me in resolving these problems. Makes me lose confidence in Cisco when I can't even get an American based engineer who knows anything about Unity! Hopefully someone here knows something.
Application Log errors below:
CiscoUnity_Notifier - Event ID 1071 and 1023,
Active Server Pages - Event ID 5,
CiscoUnity_ConvSubscriber - Event ID 187,
VBRuntime - Event ID 1,
CiscoUnity_BMsgConnector - Event ID 10005.
DBWalker returns1 error relating to orphaned entries in the GlobalSubscribers table:
*** Check for orphaned GlobalSubscriber table entries ***
1649:(error) 2 invalid rows found in the GlobalSubscriber table
These rows have no corresponding GlobalLocation table entry and are likely 'stranded' in the directory from a previous install.
The following rows were found to be invalid:
Alias=USbms_FLAPK001-T03, SubscriberObjectID={069E45E6-B471-4C7C-A4F1-07EE0248EA25}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}
Alias=Unity_FLAPK001-T03, SubscriberObjectID={A1E42B80-AF4E-42CF-A2D0-12E2BEA862B4}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}

I'll have to look into this a bit more but I can tell you what this essentially means. There are 3 main system accounts that Unity sets up when the application is installed (assuming you integrate with Exchange 2003). You actually specify the location for these objects during the permissions wizard and etc. The 2 accounts here are the primary system account for handling outside calls (Unity_) and the account used for failsafe operations (USbms_) - they are the 2 orphaned entries you see. It appears the location specified for these accounts may have been invalid during the reinstall or there was some other yet to be determined issue at play here that caused these accounts to be orphaned which is not good.
When you installed Win2K3 and then reinstalled Unity, did you set up Unity to the exact version and ES that your last DiRT backup was saved at? Also, did you specify the same OU's and etc when you ran the permissions wizard for where to import objects, create objects, and etc.
Can you attach a copy of the installation log and other application logs? I'll try to look further and see if I can be of more assistance.
Hailey
Please rate helpful posts!

Why do I get an error message that says can't burn dvds or watch videos because of errors in register? This occured after installing upgrade to 10.4

Since updating itunes with 10.4 I get an error msg stating I can't burn CDs or put videos into itunes. I tried repair option twice, uninstalled and reinstalled itunes, same problem. I do not have any CD/DVD burning software installed.

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

Prime Infrastructure 1.2.0.103 and Virtual MSE 7.3.101

Hi,
I cannot integrate Virtual MSE 7.3.101 with my Prime Infrastructure 1.2
After I setup MSE via its wizard, I make a change on WCS username and password.
When I try to integrate MSE with Prime Infrastructure, Prime notify me about the mismatch username/password.
Both systems are fresh install on my UCS C220 M3.
Does anyone has the same issue as me ?
Thanks,
Pongsatorn Maneesud

Hi Scott,
I decide to install a new Virtual MSE then after complete setup the initial wizard. This error appears,
when I check on the CLI of MSE, this message appears,
Does anyone can solve these issues ?
Need to resolve this since it gonna be on production soon.
Thanks,
Pongsatorn

Upgrading from LMS 4.1 to Cisco Prime Infrastructure

Looking for some information and confirmation on the upgrade process.
Currently we are running LMS 4.1 with a valid SAS Service Contract which will allow me to upgrade to Prime Infrastructure 1.1 or Prime Infrastructure 1.2 using the upgrade tool at no charge. After using the tool I am given access to download PI1.1 or PI1.2, however, it only actually let me download PI1.1 but said i do not have the proper permissions to download the 1.2 license. I also noticed that the software images for 1.2 are not available ont he ciso download page.
I am wondering what the latest version of Prime Infrastructure I will be able to upgrade to without an additional purchase. Can I upgrade up to all the way up to 1.4 or can I only go up to 1.2 (but then where is the download for the software).
If i can upgrade to 1.4 then what path should I take? 1.1 to 1.3 to 1.4? Just skip 1.2 since the download is not available and it will not let me download the license file?
Thank you for your help

LMS 4.x to Prime 1.x would not be considered a functional or recommended "upgrade" for most intents as you would lose several major capabilities (Topology, Ciscoview, many reports, compliance templates, etc.). Your best path right now would be to move your LMS along to the current version - 4.2.4. The release notes explain the upgrade path for that.
Licensing and upgrade eligibility-wise you need SASU for PI (not plain SAS for LMS) for major upgrades (i.e to go to 2.0). An LMS SAS contract entitles you to migrate to PI 1.2 which in effect means 1.3 although Cisco had some issues with updating the ordering system so there was not actually a SKU for PI 1.3 sold - only the 1.2 version which, when combined with your LMS SAS service contract, entitles you to move to PI 1.3 (or 1.4 but that's not generally recommended). More details are in the Prime Ordering and Licensing Guides here.
Personally, I recommend customers with existing LMS 4.x installations wait until PI 2.1 comes out to consider the upgrade. 2.0 still misses several tools present in LMS 4.x.
If you really want to move over to PI, you can export the data from LMS 4.2.4 and import into PI 1.3 (or 2.0).

Installing Prime Infrastructure

Hi All,
I have a question about the installation of prime infrastructure.
We have ordered prime infrastructure 1.1, after ordering we received 3 PAK codes. The goal is to install the LMS 4.2.
- L-PILMS42-100 Prime Infrastructure LMS 4.2 - 100 Device Base Lic
- L-PINCS11-100 Prime Infrastructure NCS 1.1 - 100 Device Base Lic
- L-PINCSW11-100 Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic
If I'm not mistaken, we can install all 3 applications, but not on the same machine? Is that correct? And how do you choose to install LMS or NCS?
When deploying the OVA file? Where can you choose to use LMS or NCS?
Or is it the same OVA file for each application and does it unlock features depending on which license file you enter in the web interface?
Thanks,
Best Regards,
Joris

Prime Infrastructure NCS 1.1 dropped the NCS name when they moved to version 1.2 (and now at 1.3). That's the second item in your original post. The 1.1 license will still be good when you upgrade to 1.3. In fact, if it's a brand new installation, you might as well start with 1.3. You can download the image from www.cisco.com/go/nmsevals and apply your 1.1 license.
Prime LMS as noted above uses its own separate license and runs on its own separate server / VM.
There's no proper product name "Prime Infrastructure LMS" though some docs may mistakenly call it that. "Cisco Prime" is the new sweeping name for a set of complimentary products developed around a loosely common architecture and look and feel. It includes Prime Infrastructure (PI), Prime LMS, Prime Security Manager (PRSM), etc.
Prime Infrastructure NCS WAN 1.1 was a one timeproduct release designed for custoemrs with some specific needs for wired infrastructure management and without having LMS. It wil not be developed further and if you have LMS there's no need to install and operate the PI NCS WAN product.

Polling issue on Prime Infrastructure

Hello all, we are seeing SNMP connection failure as a status for Last Inventory Collection when looking at our monitored devices in PI 2.2. More information is provided stating what failed (various reasons like not collecting CDP information) and possible causes. Possible causes only list an SNMP time and it states to verify the device credentials (which we have done) and verify SNMP response speed from the device. How do I do that? And is there a way to tune PI so it will wait longer for a response before timing out the request?
Please advise and thanks for your help.
Jeff

You can adjust the SNMP settings (including timeout) for Prime at Administration > System Settings > SNMP Settings
Have you installed the 2.2.1 maintenance release? If not, you might want to look at installing it, though be aware of the following if you do:
https://supportforums.cisco.com/discussion/12432566/software-images-page-cisco-prime-infrastructure-22-broken-after-installing

Prime Infrastructure 2.1 - Power supply alarms on switchs

Hi,
How can i manage to get a email if one of my power supply on a switch die (see the attached file).
I tried to activate all snmp traps possible on my switch and all i can get is configuration management events on PI.
I changed the Severity Configuration on PI for Environmental monitor detects a testpoint reaching a critical state to critical.
Any ideas?
Sorry for grammar, english is not my native language.
*** Prime Infrastructure 2.1, we will upgrade for 2.2 in few weeks***

Hello,
It's tracked by the following bug:
CSCui46231 Processing Alarm on power supply failure and Fan failure conditions
Should be resolved in PI 2.2
Ram

Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurt

i have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same

Prime InfraStructure 2.2 Configuration Template error

Hi All,
I'm facing Configuration template error . I can add the CLI template then after i press on Deploy i get error message and this is happening with all the CLI templates . ( also Attached the error )
The error message : "
Template Deployment- Prepare and schedule : HA With Virtual IP
There was an error while parsing and rendering the content. (updateLeftTreeOnce is not defined )
The HA With Virtual IP Template Body as below :
logging 10.30.2.252
ip access-list standard VTY_ACCESS
no deny any log
permit 10.30.2.252
deny any log

We are facing the exact same issue. Here are the version :
Cisco Prime Infrastructure
Version : 2.2.0
Build : 2.2.0.0.158
We tried restarting the NCS services, but it doesn't help. We have the issue on differents PC and browsers. Users told me they got the issue before but it disappeared by itself. We will open a case about it.

Prime Infrastructure 1.2 LobbyAmbassador login error

Hi.
After updating my NCS to Prime Infrastructure 1.2 yesterday, my LobbyAmbassador users get an annoying error at login.
First login was fine - it loads the Guest User List, but a new message pops up because of a new Evaluation License for Cisco Prime Assurance manager that expires in XX days.
If you click "Do not show on startup" to this message, at next login you get an error; "You do not have access to the page 'Monitoring Dashboards'".
After this error you have a blank page. Then you have to go to user preferences and click list guest users, to get to the normal page.
If you then clear your cookies and login a-new it "works" again, until you click "Do not show on startup" to the License message - then error is back.
Anyone experience same issue, or know if it is a known bug?
I have attatched screenshots of the messages.
Thanks.
Thomas

Hi.
Have tou seen the following TAC case:
CSCuc26114 - Prime Infrastructure Lobby Admin gets access error when logging in
Symptom:
When a Lobby Administrator logs in using the local db or AAA they receive the error "You do not have access to the page 'Monitoring Dashboards'" when in Lifecycle view and "You do not have access to the page 'Overview'" when in Classic View.
Conditions:
It appears that the task "Incidents Alarms Events Access" is needed to eliminate the error and show the main page. This task is not included in the task list for Lobby Administrator.
Workaround:
Add this task to the Lobby Administrator group on the AAA server or create a User Defined group and include this task.
So at a customer we tried to add the following in the ACS group:
task4=Incidents Alarms Events Access
After this the error disappeared
Hope it helps
Mikkel

Prime Infrastructure 2.1.1 cannot add more than two interfaces in Dynamic Interface Controller Templates

Cisco Prime Infrastructure is a damned nightmare of browser bugs (some features work in IE8, some in IE9, and some only in Firefox). And I am not sure if what I am experiencing is a browser bug - or a real bug - or something that I was able to do before and can't any more? I would love for someone to either explain why this is happening to me, or reproduce the bug!
I'm running Prime 2.1.1. I am doing this ...
Configure > Controller Template Launchpad
System > Dynamic Interface
Select a command > Add interface (GO)
Enter all the properties - roll to the bottom of the page, and click Apply to Controllers
I have four controllers. And normally I would add an interface for each controller. But I can only create two out of the four. It doesn't matter which two I choose. When I click Add under Manage Interfaces for the third controller, I cannot click the Done button to apply it (see screenshot, attached). I have found that if I change the VLAN to something else, it will let me save it. But ... why? I went back and reviewed all of my existing interface templates and I am not doing anything different. Although, they were all created a long while ago using WCS 7.x.
Any help, guidance, or confirmation of insanity would be appreciated.
-Steve Ballantyne

I doubt I will get any hits on this here but I always try. I opened a TAC case. I will come back and comment on whatever they find.

CISCO PRIME INFRASTRUCTURE 1.2 NCS ERROR

Hi everyone,
can anyone put through on this, i'm having issue starting the ncs server on cisco prime infrastructure 1.2 .below is the message i get when i do show ncs status:
NGPHC-CPR001/admin# ncs status
Health Monitor is running, with an error.
failed to start NCS on startup Health Monitor
Reporting Server is running
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
thanks.

Hi Marvin,
Its has never worked. This is the first time i am installing it.
I haved done as you adviced but still getting the same error as stated above.
Please is there another way out.
thanks.

Error in Prime Infrastructure 2.0 after Controller upgrade

Similar Messages

Maybe you are looking for