Error in Print Preview - Billing ( Not able to get print preview)

Dear All,
I am facing problem in print preview. I create new billing type and assign default output type and output determination procedure. I also assign output type in procedure. Also maintain condition record for the same. In billing document GO TO - Header-output...my default output type was there. Now i am facing problem in print preview. When i try to get it there is no error msg. but system is not showing any print preview.
Please help me in the same.

Hi Nitesh,
Please check if all the necessary configuration are completed for your Output determination, also check if the driver programs/smartforms are ssigned to your output type.
If everything is fine check out teh processing log Header --> output
Thanks
Arun

Similar Messages

Not able to get the start constellation of the MOPZ transaction

Hello,
When I get to step 3 of the transaction MOPZ the following error message appears to me "Not able to get the start constellation of the MOPZ transaction"
How I can fix it?
Best Regards!

Hello
Implementing the here under note you solve your issue
Best regards
1803377 - MOpz: Not able to get the start constellation

Mac not able to command Printer - Printer is able to command Mac

The Mac cannot command the HP printer to print. Print is somehow not able to work by either clicking " print " or using file/print while in iphoto8 or any program for that matter.
The Mac will recieve into iphoto a scanned image from the HP printer but for some reason cannot command the HP printer to print.
The Mac and HP successfully work via the router connection that enables the HP to send scanned images to the Mac's iphoto8 software without error.
How do I run a diagnostic on the Mac so it can find the HP printer and restore the file/print command ?
Thanks

Followed your recommendation and even designated this printer as default.
Went back to document in Word and selected file print. As soon as I selected this printer the program shut down and Word quit.
Fortunately this document had been named and saved. Because it is not listed in " recent documents or in open. Only able to find in Spotlight.
When I bring it back from Spotlight it is a " recovered document " of course because of the quit sequence I am sure.
When I go again to file/print I only have to select this printer name ( which by the way is also listed under Bonjur ) and the document vanishes and Word quits.
Any suggestions further are appreciated
Imagine I will have to take this Mac to Apple store in the morning.

With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution, best regards

pmonteil31 wrote:
Waiting for an answer and a solution, best regards
Hi,
Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

I'm not able to get my mac os 10.6.8 to print to a Savin C2525, any suggestions?

I'm not able to get my Mac OS 10.6.8 to print to a Savin C2525. I've loaded the drivers and after checking for updates and tried to add the printer. The 1st time I tried, it started printing and I could see the file name on the first page, after it printed some type unknown to me, it was blank page after page until I had to literally unplug the printer to get it to stop. I deleted the printer and tried to reinstall and now it is pausing and saying unable to find the printer.....
Any suggestions?

Try later. I just checked mine and got Software's up to date.

Not able to get the data on the page

hi,
I tried brining the data on the JSP page. I am passing the parameters to a PL/SQL procedure. but I am not getting any data or error. can anyone helpme how to proceed further I am retreving the page parameters that are passed to the JSP page like this.
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
RenderContext rc = portletRequest.getRenderContext();
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();
%>
I am getting the page parameters. but I am not able to get any result on the page.
while I am using the same code to get the data on another JSP page I am getting the data except I am not retreving the page parameters.
I am using the code like this to pass the parameters to the procedure.
OracleConnection conn__OCI = cpool.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);
 cstmt = conn__OCI.prepareCall ("begin test.test1( ?,?,?,?,? ); end;");
 cstmt.setString(2, cnumb);
 cstmt.setString(3, cperiod);
 cstmt.setInt(4, retStrC);
 cstmt.setString(5, retStr3);
 cstmt.registerOutParameter (4, Types.NUMERIC);
 cstmt.registerOutParameter (5, Types.VARCHAR);
 cstmt.registerOutParameter(1, OracleTypes.CURSOR);
 cstmt.execute();
 retStrC = cstmt.getInt (4);
 retStr3 = cstmt.getString (5);
 retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";
 retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";
 if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }
 else
 cursor = ((OracleCallableStatement)cstmt).getCursor(1);
 while (cursor.next ())
 if (spacerLine >= 2)
 ALLretStr = ALLretStr + "<tr><td colspan=5 height=1 <div id=ssubLine> <div id=ssubLinet></div> </div> </td></tr>";
 ALLretStr = ALLretStr + "<tr class=smmjWipAltText><td ALIGN=LEFT>" + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";
 spacerLine++;
 }

Hi Frank, 
 
I am getting a blank page after hitting the submit button. can you help me finding a solution for this in the JSP page or tell me where the error is. 
 
<%@page contentType="text/html;charset=UTF-8" %> 
<%@page import="oracle.portal.provider.v2.render.*" %> 
<%@page import="oracle.portal.provider.v2.render.PortletRenderRequest" %> 
<%@page import="oracle.portal.provider.v2.PortletDefinition" %> 
<%@page import="oracle.portal.provider.v2.http.HttpCommonConstants" %> 
<%@page import="java.sql.*, javax.sql.*, java.util.*, oracle.jdbc.*, 
oracle.jdbc.pool.*, oracle.jdbc.oci.*" %> 
 
<% PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST); 
RenderContext rc = portletRequest.getRenderContext(); 
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition(); 
%> 
<%! String tree_descrip; String tree_descrip_long; 
String curr_Scheme; 
String overl_gif; 
String curr_css_path; 
// page param 
String p_number_val= "1"; 
String p_period_val= "Day"; 
%> 
<% String long_desc = "LONG"; 
String Descrip = "SHORT"; 
String treeDescrip= "%SUBMISS%OLDER%"; 
String curr_treeCateg = "SUB"; 
try 
{ 
curr_Scheme = getInfo.getSchem.getSchem(); 
overl_gif = "/images/tested/"+curr_Scheme+ "images/prefreshdefault.gif"; 
curr_css_path = "/images/tested/" curr_Scheme "css/param_jsp.css"; 
tree_descrip = getInfo.getPortletTitle.getPortletTitle ( Descrip , treeDescrip , curr_treeCateg); 
tree_descrip_long = getInfo.getPortletTitle.getPortletTitle ( long_desc , treeDescrip , curr_treeCateg); 
} 
catch(Exception e) 
{ 
tree_descrip = ""; 
tree_descrip_long = ""; 
} 
%> 
<% // Get page param p_number_val try { p_number_val = request.getParameterValues("p_number")[0]; } catch(Exception e) { p_number_val = "1"; } 
// Get page param p_period_val try { p_period_val = request.getParameterValues("p_period")[0]; } catch(Exception e) { p_period_val = "Day"; } %> 
<HTML> <HEAD> <link href="<%= curr_css_path %>" rel="stylesheet" type="text/css" media='' screen=''/> <SCRIPT LANGUAGE="JavaScript1.1" SRC="/images/smmj_page_obj/Popup/overlib.js"></SCRIPT> </HEAD> <BODY>
<TABLE WIDTH=100% summary="<%= tree_descrip %>" border="0" cellspacing="0" cellpadding="3" BGCOLOR="#FFFFFF" > <TR WIDTH="100%" height="6px"><td height="6px" COLSPAN="6" ></td></TR> <TR WIDTH="100%" > <td ALIGN="LEFT" nowrap ></td> <td ALIGN="LEFT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS"> CYCLE NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">ID</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">FIRM NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">BILLING PERIOD</td> <td ALIGN="RIGHT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS0">AGE</td> </TR> <%= getOlderSubs( p_number_val, p_period_val , "dev", portletRequest.getUser().getName(), "close_connect") %> </table> <TABLE><TR><TD> <%=p_number_val%>
<%=p_period_val%> 
<%=portletRequest.getUser().getName()%> </TD></TR> </TABLE> </BODY> </HTML> 
<%! private String getOlderSubs( String cnumb, String cperiod, String cstring, String userid, String cState) throws SQLException
{ 
CallableStatement cstmt; 
ResultSet cursor; 
int spacerLine = 1; 
int retStrC = 1; 
String retStr = "f"; 
String retStr2 = "f"; 
String retStr3 = "f"; 
String retStr4 = "f"; 
String ALLretStr = " "; 
String TempretStr = " "; 
String userstring = getInfo.getPortlUser.getPortUsr("B", "1"); 
String pwstring = getInfo.getPortlUser.getPortUsr("B", "2"); 
String CNNstring = getInfo.getPortlUser.getPortUsr("B", "3"); 
String PROXY_user_name = "test$" + userid; 
//String PROXY_user_name = "test1$roger" ; 
String url= "jdbc:oracle:oci:@" + CNNstring; 
Properties prop = new Properties(); 
try { 
if ( userid.trim().toUpperCase().equals(getInfo.getCONN.chkPortal.trim().toUpperCase()) ) 
{ 
ALLretStr = "<tr><td>Default user: " + userid + "</td></tr>"; } 
else 
{ 
// Create an OracleOCIConnectionPool instance with default configuration
OracleOCIConnectionPool cpool = new OracleOCIConnectionPool(userstring, pwstring , url, null); 
Properties proxUserProp = new Properties(); 
proxUserProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME, PROXY_user_name); 
OracleConnection conn__OCI = cpool.getProxyConnection
(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp); 
cstmt = conn__OCI.prepareCall ("begin PORT_CURSOR.s_submission_wip( ?,?,?,?,? ); end;"); 
cstmt.setString(2, cnumb); 
cstmt.setString(3, cperiod); 
cstmt.setInt(4, retStrC); 
cstmt.setString(5, retStr3); 
cstmt.registerOutParameter (4, Types.NUMERIC); 
cstmt.registerOutParameter (5, Types.VARCHAR); 
cstmt.registerOutParameter(1, OracleTypes.CURSOR); 
cstmt.execute(); 
retStrC = cstmt.getInt (4); 
retStr3 = cstmt.getString (5); 
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>"; 
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>"; 
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; } 
else 
{ 
cursor = ((OracleCallableStatement)cstmt).getCursor(1); 
while (cursor.next ()) 
{ 
if (spacerLine >= 2) 
{ 
ALLretStr = ALLretStr + "<tr><td ALIGN=LEFT nowrap ></td><td colspan=5 height=1 ></td></tr>"; 
} 
ALLretStr = ALLretStr + "<tr WIDTH=100% class=smmjPort2Text >
<td ALIGN=LEFT nowrap ></td><td ALIGN=LEFT> " + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>"; spacerLine++; 
} 
} 
if (cState != null ) 
{ //return(retStr); 
if (conn__OCI != null) conn__OCI.close(); 
if (cpool != null) cpool.close(); 
}} 
return(TempretStr); 
} 
catch (SQLException e ) 
{ 
String retErrStr = retStr + " SQL Error: <PRE> " + e + " </PRE> \n"; 
return(retErrStr); 
} 
} 
%> 
Regards, 
Vijay.

Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP

Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
Code is :
<h1>JSP Page</h1>
<%
long type = 0;
String tagId = null;
String timeStr = "0";
String deviceName = "";
// Get Event Parameters
// Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
try
type = Long.parseLong(request.getParameter("type")); // Get type
tagId = request.getParameter("id"); // Get tagId
timeStr = request.getParameter("time"); // Get time
 deviceName = request.getParameter("deviceName");
catch (Exception e)
out.println( "Error: "+e.getMessage() );
 // Write into DB.
 try {
 if ((tagId == null) || (type != 200) ){
 // Do Nothing
 //return;
 } else {
 OracleDataSource ods = new OracleDataSource();
 String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";
 ods.setURL(URL);
 ods.setUser("cus");
 ods.setPassword("cus");
 Connection myConn = ods.getConnection();
 Statement stmt = myConn.createStatement();
 String selectQuery =
 "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
 "cus.rfid_raw_reads ";
 ResultSet rs = stmt.executeQuery(selectQuery);
 String maxId = "1";
 if (rs.next()) {
 maxId = rs.getString(1);
 String selectMaxTagIDQuery =
 "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
 "cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
 stmt = myConn.createStatement();
 rs = stmt.executeQuery(selectMaxTagIDQuery);
 String maxTagId = "1";
 if (rs.next()) {
 maxTagId = rs.getString(1);
 long primaryKey = 1;
 long tagKey = 1;
 try {
 primaryKey = Long.parseLong(maxId) + 1;
 tagKey = Long.parseLong(maxTagId) + 1;
 } catch (Exception e) {
 long currentTime = System.currentTimeMillis();
 long updateKey = (tagKey - 1);
 String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
 Statement updateStmt = myConn.createStatement();
 updateStmt.execute(updateQuery);
 String query =
 "INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
 Statement insertStmt = myConn.createStatement();
 insertStmt.execute(query);
 myConn.commit();
 myConn.close();
 } catch (Exception e) {
%>
For browser debug:
<%
out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
%>
Kindly suggest where is the problem...
Thanks and regards
Mohammad Nasim Akhtar

HI Prabhat,
Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
Event statical is showing like this
Events Received: 0 (0.00/sec)
Events Generated: 311 (0.19/sec)
Events Sent: 2 (0.19/sec)
Queued Events: 309 (0.19/sec)
Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
Thanks and regards
Nasim

Not able to get the maintainance cost

Hi all,
I m stuck with a critical issue. I m not able to get the cost of maintainance. while creating maintainaince order I m getting ERROR - MISSING FORMULA IN WORK CENTER and a warning message NO PRICE COULD BE DETERMINED FOR INTERNAL ACTIVITY .
I have done everything which I know regarding costing configuration.
I have created activity type ,asigned it to the cost center,assigned parameter to the std value key what else is required.
I m not getting any of the cost in costing tab of maintainance order .
Please help me out.
Thanks& Regards
Pooja

Hi ,
1. In Work Center under costing tab , maintain cost center
In work center which you are using in Maintenanace Order operation , please mention the activity type in Act Type Int Proc field and formula as SAP008 in costing tab of work center ..
2. In Schdueling Tab of IR02 mention SAP004 in Other formula Field.
3. In Capacities tab of Work center maintain SAP008 as other formula
4. In KP26 for the combination of cost center , activity type ,version, period maintain fixed price ..
5. Check whether value categories are assigned to cost elements in Config
6. Check whether costing variants are assigned for Planned nd Actual costs to combination of plant and order type ..
plz check the above and then test up again with a new order
regrds
pushpa

Not able to get the login page after installing 12.1.1

HI,
i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
Thanks,
venkat.

Hi,
What is the OS?
What is the error message?
Any errors in Apache/Database log files?
Thanks,
Hussein

Not able to get the connection to mssql server thro native sql

Dear Experts,
I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
could anyone hlep me on this issue.
Thanks in advance.

Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
Error 156
Severity Level 15
Message Text
Incorrect syntax near the keyword '%.*ls'.
Explanation
This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
Action
First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70.

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group.

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "";
Also I have used,
             String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof     {
     public static void main (String[] args)     {
          Hashtable env = new Hashtable();
          String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
          String adminPassword = "XXXXXXX";
          String ldapURL = "ldap://mydc.antipodes.com:389";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               //Create the initial directory context
               LdapContext ctx = new InitialLdapContext(env,null);
               //Create the search controls
               SearchControls searchCtls = new SearchControls();
               //Specify the search scope
               searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               //specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
               //Specify the Base for the search
               String searchBase = "DC=antipodes,DC=com";
               //initialize counter to total the group members
               int totalResults = 0;
               //Specify the attributes to return
               String returnedAtts[]={"memberOf"};
               searchCtls.setReturningAttributes(returnedAtts);
               //Search for objects using the filter
               NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
               //Loop through the search results
               while (answer.hasMoreElements()) {
                    SearchResult sr = (SearchResult)answer.next();
                    System.out.println(">>>" + sr.getName());
                    //Print out the groups
                    Attributes attrs = sr.getAttributes();
                    if (attrs != null) {
                         try {
                              for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
                                   Attribute attr = (Attribute)ae.next();
                                   System.out.println("Attribute: " + attr.getID());
                                   for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
                                        System.out.println(" " + totalResults + ". " + e.next());
                         catch (NamingException e)     {
                              System.err.println("Problem listing membership: " + e);
               System.out.println("Total groups: " + totalResults);
               ctx.close();
          catch (NamingException e) {
               System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "";
Also I have used,
             String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof     {
     public static void main (String[] args)     {
          Hashtable env = new Hashtable();
          String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
          String adminPassword = "XXXXXXX";
          String ldapURL = "ldap://mydc.antipodes.com:389";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               //Create the initial directory context
               LdapContext ctx = new InitialLdapContext(env,null);
               //Create the search controls
               SearchControls searchCtls = new SearchControls();
               //Specify the search scope
               searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               //specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
               //Specify the Base for the search
               String searchBase = "DC=antipodes,DC=com";
               //initialize counter to total the group members
               int totalResults = 0;
               //Specify the attributes to return
               String returnedAtts[]={"memberOf"};
               searchCtls.setReturningAttributes(returnedAtts);
               //Search for objects using the filter
               NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
               //Loop through the search results
               while (answer.hasMoreElements()) {
                    SearchResult sr = (SearchResult)answer.next();
                    System.out.println(">>>" + sr.getName());
                    //Print out the groups
                    Attributes attrs = sr.getAttributes();
                    if (attrs != null) {
                         try {
                              for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
                                   Attribute attr = (Attribute)ae.next();
                                   System.out.println("Attribute: " + attr.getID());
                                   for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
                                        System.out.println(" " + totalResults + ". " + e.next());
                         catch (NamingException e)     {
                              System.err.println("Problem listing membership: " + e);
               System.out.println("Total groups: " + totalResults);
               ctx.close();
          catch (NamingException e) {
               System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
 bwkey type werks_d,
 matnr type matnr,
 lgort type LGORT_D,
 budat type budat,
 labst type labst,
 endmenge type p decimals 3,
 end of w_tab.
 DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any . " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
 record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
 wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
 output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

Are you sure it was error 0604 since I never heard of that error, it does not appear in the list of errors in the following and a search of Apple's support site gets no hits. However, error 1604 is list and users have reported that error number. If 1604 is the error number the following tell yu wnat to do when you click on that error number:
iOS: Resolving update and restore alert messages

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

Error in Print Preview - Billing ( Not able to get print preview)

Similar Messages

Maybe you are looking for