Error in print preview or printing

Hi Experts,
Have anyone of you experts encountered the error below:
Graphic cannot be displayed.
Message no. SSFCOMPOSER159
Diagnosis
The graphic with the key (name = , object = GRAPHICS, ID = BMAP, type = BCOL) could not be found.
System Response
The system issues an error message.
Procedure
Check whether the key is specified correctly.
This error was encountered when I am trying to have a print preview of form Order Acknowledgement based from the message I created in language 'NL' - Dutch, however I did not encounter this error when I print preview the form based from the message i created in EN - English.
Can you please help me find the reason or resolution to this problem. Thanks!
Nosaj-

Hi
Your smartform is calling a logo doesn't exist.
Try to check the node GRAPHIC probably here the name of the logo is transfered by a variable and the variable is initial:
The graphic with the key (name = , object = GRAPHICS, ID = BMAP, type = BCOL)
As you can see it in the error message there's any value for the NAME: how are you indicating the name of the logo?
Max

Similar Messages

Why will some website articles not print preview or print more than part of the document in firefox. I sometimes have to go to IE to be able to print the entire document.

I often want to print an article from a website. Many times when I print preview, it will only show the first, second and maybe last page, but nothing inbetween. I have tried printing it anyway but nothing inbetween will print. My solution has been to go to Internet Explorer where I have then been able to print preview and print the entire article. This is annoying and takes extra time. Is there a setting that I need to make in order to eliminate the problem

Top left (Orange) Firefox button, Print, Print Preview. Does everything look correct? You may also click the icon that looks like a "DISK" to save, which allows you to save it to your computer and CTRL+P will allow you to print.

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Print preview and print doesn't show the correct out put result when i connnected with EPSON LX-300+II

I hava an html webpage with css & print css. The print preview and print doesn't give correct output there is alignment problem when i connected with EPSONLX-300+II. But iam connected with hp laserjet they show the correct output with firefox. Please fix the problem as soon.....

I have same problem as you, but later I know how to deal with it.
1. change your print default preferences to
print quality into (120x144 dpi, or other which suites you)
mine goes well to 120x144 dpi
2. Before print enter File->Page setup, set true to option shrink to page width
in order to fit your page into your desired paper
(firefox will resize your content to suit the paper you choose).
If you dont want this you can disable this option.
3. Still in Page Setup, if checkbox "Print background (color & images)" is unchecked then
white text will be printed black.
Set this checked if you want to print white text as it is color.
I hope it answers your question.
Steve
http://www.dailymobilegames.com

Wrong print preview and printed color from Lightroom 1.3

I am running Vista Ultimate and i just installed the driver for my Canon PIXMA Pro9000.
When i try to print from Lightroom 1.3 the colors are very muted, even when i do print preview the colors are wrong in the print preview screen.
No matter what i do i cant seem to get lightroom to Print Preview AND print with the right colors.
The image on this link http://www.pbase.com/charld/image/94711330
(on the left) is what i see and get when i do a print preview and print and my monitor image is on the right.
If i use Canon DPP the colors are not that bad, its a bit dark but that was easily fixed and i can get it quite close to what i see on the screen. My monitor is not calibrated..The images were all shot in RAW and converted to DNG...Do i need to re-install Lightroom as i don't think print preview has anything to do with the printer i have attached....
Thanks

I got the solution from another forum:
http://www.lightroomforums.net/showthread.php?t=1613
1. in the Print module, clicking on the Print Settings button ...
2. Choose your media type
3. Under Print Quality choose High
4. Under Color Intensity choose Manual. In the subsequent dialogue box choose None.
5. In the Print right hand panel under Color Management choose your print media - PR1 for Photo Paper Pro, SG1 for semi-gloss &c
6. Rendering intent Perceptual.
7. Hit Print and OK.
this resolved my issue!!

Flash windows in web page do not print preview or print - works in IE

Specs:
Win XP Pro, SP3, Laptop and Win 7 Desktop
FF 3.6.10
IE8
Latest flash for IE and FF - 10.1.85.3 (previous 10.1 versions also issue)
I routinely use www.speedtest.net and www.speakeasy.net/speedtest to perform speed tests for troubleshooting issues. Both use Flash windows to show the Download/Upload speed test progress and final results.
In IE8, both ''print preview'' and ''print'' work and display/print the contents of the flash windows. In FF, everything displays/prints properly expect the content of the Flash windows - they are blank.
Apologize, as I imagine this has had to be reported in the past as I've seen posts via Google search going back many years, but could not find anything recent in FF help or forum. In addition, I assume this could be a Flash issue. However, if it is, it is not impacting IE. Regardless whether an FF or Adobe issue, I believe that Mozilla should head up and manage the repairs.

If you just need an image of the page (not the browser frame or full desktop), the FireShot extension will do that. I have been using FireShot for some time and am quite happy with the results. I just tested it on www.speedtest.net results on my XP system and it worked. With Fireshot, you can add notations and print or save the image (full screen or just visible area). Do not opt for the paid "Pro" version, just use the free version. If you use it, you may want to block outgoing connection to screenshot-program.com in your firewall; I do not know why it tries to make that contact with it each screen capture, but it works fine with the firewall blocking the outgoing connection.
FireShot: https://addons.mozilla.org/en-US/firefox/addon/5648/
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape "9.3.4" (ver. 9.4.0.195, a security update, was released 2010-10-05)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.

Word for mac won't show doc in print preview and prints blank page.

I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

Then post your question on the Microsoft Mac forums since it's their software you'r having problems with. These forums are for troubleshooting Apple products
http://answers.microsoft.com/en-us/mac

Print preview and print button action

Hi,
This is first time when I am configuring any action in WebUi. I am trying to configure buttons on BT116H_SRVO. Clicking on "Print Preview" shows 'No manual print actions found' and click on "print' throws some exception.
I tried to check action configuration but could not find the right way to do it. Can you please guide me step-by-step as which action profile is meant for this component and how will these buttons work?
I tried action profile 'Service Order' but it seems it was not the right one.
Thanks.
Edited by: ShikhaC on Jul 7, 2009 10:49 AM

Hi,
I am trying to get the Print Preview/Print function working in the webui for "Service Requests" and have configured the following and assigned it to the transaction, but I get an error:
"Errors in smart form: An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occured, but was neither handled locally, nor declared in a RAISING clause."
Can you please let me know if my configuration is correct?

Not able to print preview or print Smartform after the changes

Hi Experts,
I made a small change to the smartform, saved it and activated it. Transport it to our QAS system for testing.
But while trying to print preview the form i am not able to see any print/print preview. After my debug in the report that calls the form i found that at
call function G_FM_NAME it is not importing any values at all.
There was no change made on report or call function, we only change it on the smartform.
Could somebody tell me what might be the problem.
Thank you
Mamatha

i have no clue what your problem is, it would be too much of a guessing.
But i have a way how you can find out what the problem is:
After your "CALL FUNCTION fm_name"
adopt your coding with following:
IF sy-subrc NE 0.
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
errortab = yy_lt_errors.
ENDIF.
this will give you a list of errors if there are any.
Then have a look at that internal table, see the errornumbers and goto SE91 for outputclass "SSFCOMPOSER" and check what the message behind your error class is.
This has helped me quite often.
regards

I changed my margins in page setup and now I cannot see page setup, a print preview, or print, what do I do?

I changed left and right margins to .5 thinking they were in inches and closed the page setup screen the next time I tried to print all I saw was a blank page or no page depending on zoom / shrink to fit ratio set. When I go to page setup all I get is a new window that is transparent in the text area and extends off the right side of the screen. I have to right click and select close to close it as I do not see the standard minimize, maximize, and close buttons. I do not want to reset defaults as I have changed many settings and do not remember all the settings I have changed. I do have an older copy of my firefox profile in a previous user profile of mine on this machine. Is there an easy way to reset the page setup settings?
What do I do?
PS. I am using Firefox 29 on a XP Pro machine slated for upgrade to windows 7 Pro.

Sorry I have been away from this system forr a while. when I turned it on this morning and launched Firefox it upgraded me to version 31.0.
Attached are three Png files, one is what happens if I try to print to do a print preview. If I try to print a web page it prints the same thing.
The other file is what comes up when I click on page setup. It opens a very wide window that is a copy of the web page that was there when page setup was clicked on.
The Third is what happens to the above page setup window when I drag the window to the left.

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Hide check box in the print preview and print of OO ALV

Hi Experts,
I am working on an OO ALV Report. I am facing an issue as,
1) I have a check box in the output of the report. If the user clicks on print or print preview the check box should not be printed.
2) When I am printign top of page in the event PRINT_TOP_OF_PAGE, when I tried to insert new line its not printing a new line.
please suggest me how to print empty lines in the print top of page event of OO ALV.
Please help me to complete these issues.
Thanks in advance.
Regards.
Ranganadh.

hi,
you can use the write statement in the print_top_of_page event of oo alv.
regards.

Can't print preview or print in Excel or PowerPoint

Gosh, I've been so busy fighting wireless networking issues with Leopard, it wasn't until today that I finally had a need to print an Excel spreadsheet and much to my slowly building frustration with Leopard, that too is a no-go in Leopard. In either Excel or PowerPoint, using "print preview" yields only blank pages and if you attempt to print the document, you get precisely the same, just blank pages.. Such is not the case in either Word or Entourage... Those both print ok... What I also find somewhat ironic is if I dump those same Excel spreadsheets into Parallels under Windows XP and the pc version of Excel, I can print the documents with no problem... Ouch... On my mac I'm running the most current version of Office (11.3.9) and my printer is a Brother PrinterMFC5440CN. I've encountered this same printing issue on both of my macs, a MacBook Pro and a G4, both running Mac OS X 10.5.1... Anyone have any possible solutions??? thanks... bob...

Hi Robert,
Just wondering if you sorted out this problem? I am new to Macs and recently bought an iMac after being a PC and Windows user for years. I have never had problems with printing but very frustratingly do now with the Mac. I have an Epson R265 and can print from photoshop, entourage, excel but not from word.
If you had any success with this problem could you let me know.
thanks very much
Sara Bell

Print preview vs print

Hi Experts,
I have a problem when trying to see the result of mijn sapscript or smartform via print preview.
The result of the print preview is very different from the real print (if i print the same form).
By sapscript i get the text : display text as abap list in the screen of the print preview.
Via print preview i cannot see the frames for example ..etc.
How could i solve this problem?
Thanks in advance.

Hi,
Please ensure that you are giving the same printer name for both print & View, as the device type used in that printer will decide how it is displayed. i.e. your print preview may be different if you use 2 different printers having different device types.
Regards
Raju Chitale

Some barcodes blank in print preview, but printed correctly

Hi,
Very strange behaviour in a customers system - normally smartforms with barcode 128 are previewed and printed perfect. After a two monts productive use, customer reported a problem with preview - few barcodes are not previewed (showed as blank on form), but printed correctly. Count of problem barcodes is less than 1%.
For example:
- 'FLAGU01Z_01' barcode is previewed correctly
- 'FLAGRO00Z_03' barcode is blank on preview
Any suggestion about this?
Thanks in advise,
Hristo Hristov

Hi guys,
The catch is, when re-printed, it already appears. But after the batch job has been completed, this does not automatically appear.
This involves, output type of a delivery.
Thanks for your reply!

Error in print preview or printing

Similar Messages

Maybe you are looking for