Error in Printing Material Document in MIGO (movement 561)

Hello everyone!
Kindly assist me with this. We are trying to print an output document in MIGO. We have set up the Output type WA03 in NACE and in MN21. When we started printing the document, an express message was generated stating that:
Update was terminated
System ID....   E6D
Client.......   100
User.....   MANTOML
Transaction..   MIGO
Update key...   4A08E8ABA95D0096E1008000C0A81447
Generated....   14.05.2009, 15:00:26
Completed....   14.05.2009, 15:00:26
Error Info...   TD 427: Element KOPF
Thank you for you assistance.

Hi,
Please check whether you have defined your element and window properly.
This type of error occurs only when they are not defined properly.
Regards

Similar Messages

Error while cancelling the material document. MIGO

i am getting following error while cancelling material document
You cannot cancel GR, since inspection lot is already partly posted
Message no. QA046
Diagnosis
You are attempting to reverse a goods receipt although quantity postings have already been made from the inspection lot. This means that stock for the goods receipt has already been transferred and, for this reason, a cancelation of the document is no longer possible.
Procedure
Ensure that the postings in QM (within the usage decision transactions) are carried out.

hi,
You can't do cancellation here just because you have given some lot/qty to QI:
2 ways:
1. Don't do cancellation, make returns for the rest of the qty...
2. Take back the qty in the Unrestrcited stock back and then try to do cancellations...
Regards
Priyanka.P

Print Material Document

Dear Experts ,
can anyone please tell me the setp by step configuration for printing material document for
1. GI ( all kinds as in 201 , 261 , 551, 543 )
2. GR( all kinds as in 101 , 501)
3. Transfer Posting ( 541, 311 , 301 )
Pls tell me wat are the relevent o/p conditions to be used ?
in std SAP there are many o/p contition types & which one is to be used is quite confusing ,.
Pls extyened help
Regards
Anis

Hello Vikas ,
Can you please clarify me the steps involved in a more lucid way ?
I have gone through many threads, but nowhere do i get the step by step procedure .
Some mention to use MN21 , some dont . There are many o/p condition types . Which is to be used ?
Pls just give me one single example 2 generate the Material document o/p .
I have done teh configuration based on various threads already posted but it doesnt seem to be working for me .
I WANT TO SEE THE PRINT PREVIEW OF MIGO - 201 GI DOCUMENT
I have done the following .
1. In OMBR selected the local printer with multiple check box ticked .
2. made the following settings :
MIGO     Goods Movement     3     Collective Slip
MIGO_GI     Goods Movement     3     Collective Slip
MIGO_GO     Goods Movement     3     Collective Slip
MIGO_GR     Goods Movement     3     Collective Slip
MIGO_GS     Subseq. Adjust. of Material Provided     3     Collective Slip
MIGO_TR     Transfer Posting     3     Collective Slip
ML81     Maintain Service Entry Sheet     3     Collective Slip
ML81N     Service Entry Sheet     3     Collective Slip
3. IN omb5 I ahve assigned 1 for mvt type 201.
4. In M706 , I have maintained transmission medium 1 Print output & print parameter 7 Plant/storage location for output types WA01 , WA02, WA03
5. In OMJ3 I have maintained the combination of WA01/2/3 & my plant & storage loaction . with immediate & release ticked.
6.After thatI mainatinmed the comdition records for WA01/02/03 with WA, print version 3 as :
      Print item : 1
Function : No entry
Partner : No entry
Medium : 1
Date./Time : 4
Language : EN
After this i did the MIGO 201 GI transaction for the plant / storeage location & went to MB90.
BUT I M GETTING NO SPOOL REQUEST GENERATED .
PLEASE TELL ME WAT IS WRONG
REGARDS
Anis

Print material document (WE02) automatic when GR

Hi Guru,
I want to let the system automatically print material document output "WE02" when I post Good receipt w/ MIGO 511 Movement type.
I use OMJ3 to maintain the condition type WE02/Plant/storage location/outpud device and immediate.
Please advise the other steps.
Cheer,
Rick

OMBR - Set "1" as material document printout
OMB5 - assigned "1" to 511 movement type,
But I still can get the material document automatically printed out during MIGO GR with 511 movement type.
some people guide me to pay attendtion to user profile, but I am not clear about what's NDR.
++++++++++++++++++++++++++++++++++++++++++++++++++
Then we need to make sure that the parameters in the user profile are set properly. NDR = "X".
++++++++++++++++++++++++++++++++++++++++++++++++++

How to print material document in header level?

Hi Guys,
How to print material document from header level. I can only print them in item level. But i want that in header level. For example, I have 4 movements inside a material document and I want to issue only one output from the header level.
I can see the option Goto -> Additional Function -> output, but it is disabled. Please let me know hot to acheive this and if you need further info on this. Please throw some light on this.
Thanks
Yasin.

HIi
Your question is not clear. What exactly you want to be.
1. To print material header in your smart form / Sap Script what is the problem. Itu2019s quite easy you can do it. Let me know what problem you are facing.
2. The option is disables because of business functionality ask your functional guys to help you on the same.
Regards
Swati

Material Document in MIGO

Hello,
I processed a good receipt on MIGO with mvt code 101. I use MIGO transaction code, but when I display the material document in MIGO, in Doc Info, SAP shows that Transaction code MIGO_GR has been used.
Is there a way to make SAP show the transaction code actually used by the user, and not the one corresponding to the mvt code?
thanks,
Laure

Hi Laure
This is a standard behaviour. MIGO_GR is just a view of MIGO. When you select, Good receipt in MIGO, system takes it as MIGO_GR.
Best regards
Ramki

Help - Receive message "an error occurred printing this document" when using airport express and Ipad

Hi, I am trying to set up an airport express hub to work with a Star tsp100 receipt printer and IPad 2. The IPad is being used to accept credit card payments and I was hoping to print receipts out wirelessly using the airport express and receipt printer. I checked to make sure the airport express has the latest firmware and it does. The IPad software is also updated to the latest 7.1. I then connected the Airport express and IPad and the network setup with no problems. I connected the receipt printer to the airport express using the USB slot available. While the printer comes up as available, when I attempt to print something, I get the error message "An error occurred printing this document" and I can cancel or Try again. No matter how many times I try, I continue to get this message and I lost as to the cause. When I disconnect and reconnect, another instance of the printer appears, but receive the same cryptic error message when I try to print. Totally lost, please help

Hi kelston3,
In order to print from an iPad you will need to use a printer that is compatible with AirPrint, which is described in the following article -
About AirPrint
http://support.apple.com/kb/HT4356
AirPrint printers must be wireless on your network - not connected via USB to the base station. There is a list of printers that are known to be compatible with AirPrint in the article.
Thanks for using Apple Support Communities.
Best,
Brett L

HT201406 I was printing and printer jammed. iPad gives the command; an error occurred printing this document Cancel Try Again - no response to either command and the iPad will not let me shut down.

I was printing docs from my iPad and the printer jammed. iPad's screen now shows: an error occured printing this document - Cancel Try Again - the touch screen will not respond to any command. Cannot turn it off, cannot cancel and cannot try again. I've turned the printer off and restarted it.

Try a reset. Nothing is lost
Reset: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
BTW, you posted in the iPod topuch forum.

MIGO - MB02 - MB90 Print material document forms

Hi,
I want to print out a material document form associated to material transfer within the same plant. Movement 311/411 & 415.
As for today the procedure is to create the material doc (MIGO) -> declare the message associated (MB02) -> print (MB90). Is there a way to suppress the MB02 transaction by adding a button to MIGO? (or any other better way).
Thanks in advance... points awaiting.
Garcia

Hi,
II. Pls check the below settings for GR Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Regards,
Manish

Fixing automatic printing of material document for goods movement type 101

Hi experts,
I have a situation, where I want to fix automatically printing of material documents good receipt and transfer posting related to movement type :
101- GR for plant XYZW to the printer AB12 with output type WE03 " GR note version 3" Language EN.
311 - transfer posting plant XYZW to the printer AB12 with output type ZUGT language EN.
Please provide pointers!!

Hi Biju,
Thanks a lot for the information. But I a facing a problem, I have maintained the Plant/Storage/Condition type in OMJ3 with printer also maintained in it.
But, I am not able to generate output when I am doing MIGO for the Purchase order.
I have to go MB02, maintain output type 'WE03' and printer-PL56 in the message tab of material document and then only i can see the spool is generated in SP01.
My output condition type is maintained in MN21, with following parameters; Trans/Event type: WE, Print Version: 3, Print Item: 6 for output type WE03.
Moreover, Do I need to maintain the new printer in the printer settings.
Please help me in getting the material document print output at MIGO only.

MIGO printing material document when saving.

Hi,
how enabling automatically the printing of materials document in MIGO when saving ?
Best regards

The steps are the following:
trx M706 or SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03;
Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1, Print Parameter is 7;
trx MN21, for output type WE01, WE02, WE03 select Tr Type WE, Print Version 1, 2, 3, maintain Print Item as 1.
For enabling printing when user post a goods receipt is necessary set in trx SU01 for the users the parameter NDR and activate it with an X.
This will set the tick in the field XNAPR in MIGO.
At every logon system will propose the field checked
If the user will remove the tick or will put again the tick during a session system will remember
the last setting.
At the following logon system will propose again the above field checked
System will also remember if user has set in MIGO "GR Note Vers1 or GR Note Vers 2 or GR Note Vers3" for the entire session and furthers logons.

Error while cancelling a document in MIGO

Hi all,
while cancelling a document in MIGO, i am getting a error like
"The price for material mat-004 will be negative".
while checking, there will be no error. but while posting, this type of error is comming.
plz suggest where i am doing mistake.
any idea will be highly appreaciated.
Regards
pabitra

Hi santosh,
in MM03, i saw there is 3 fields for ' per unit price ' in ACCOUNTING1.
which price it is taking as material price?
In test server, i tried to cancel a document having info record price = $ 2 and
material price = $ 230 sgd .it is cancelled.i am getting 3 price in accounting1 of MM03.
those are
Company code currency-$230 sgd
Hard currency----
$230 sgd
Index-based currency----$0.12 usd
i am able to cancel this document in test server though it is having different price at info & material level.
from the above 3 fields, which field it is taking for material price?
at every time we, will give the material price, the info price should be automatically updated.what is the need to change the info price?
plz give a clear idea.i am having confusion.
Regards
pabitra

Error While cancelling material document

Hi ,
I Want to cancel a material document which was posted some five months back in current period because already the period is closed and mean time the price of the material also has changed ,now while I am trying to cancel the document system throughs an error that document cannot be posted error in price determination what may be the cause and how to rectify.
Regards
kantha

Hi Vijikantha,
If you are trying to cancel material documents created related to delivery, you can reverse the delivery through VL09. Any material documents for goods receipt can be cancelled through MBST. If there is a problem with the posting period, please take the help of Finance guy to open the previous period and try to post the document.
Best Regards
Srinivas

Printing material-documents without flag (parameter NDR)

Hello everybody,
I've got a question regarding printouts of material-documents. Normally the printout is done via condition-technique. Now my customer asks for a printout even if the flag for the printing is NOT set (Parameter NDR) in the document-header.
Does anybody know how to solve this request? Is there a user-exit where I can check the requested requirements?
Thanks for an answer,
Thomas

Hello Thomas,
The "print flag" (GOHEAD-XNAPR) is for selecting the print version (field WEVER). In standard all output are dependend on the print version (WE01 on version 1, WE02 on version 2, etc).
If you set NDR = blank and GOHEAD-XNAPR not flag, I think the solution is to create a access table and add to the access sequence that is linked to the output type, WA03 for example. Then these customized condition tables must not check the "print version" (WEVER). As a result the output are independend from setting the print flag and thereby selecting a print version.
You need to test this solution but I think it can work.
BR,
Rodrigo

Smartform error while printing multiple documents

Hi Friends,
When I am trying to print individual documents the Smartform output is correct but when I select multiple documents its showing an error that says ' Table GRAPH does not fit into the window'. When I change the GRAPH node it says some other node does not fit. And it goes on.
Is there any easy way to correct this error ?
Please help.
Regards,
Dikshitha G

Hi Dikshitha,
First you need to check whether you have used TABLE under a secondary window or Main window? When you use table GRAPH under MAIN window then automatically next page will be printed and Window width adjusts automatically. Only make sure Hight and Width of Window should not be less than the Table. Click on Output tab of Main window and not down hight and width similarly check for TABLES.
Regards,
Gaurav.

Error in Printing Material Document in MIGO (movement 561)

Similar Messages

Maybe you are looking for