Error in Printing Style of FSG reports

Hi Gurus,
For a report (Financial Statement Generator)”, when executed from PROD, the print style is getting defaulted as “Portrait - For W2 Paper(2001 or later)”.
The same report when executed from TST, the print style is getting defaulted as “Landscape” which is correct.
Same is the case for other Financial Statement Generator reports.
No clue why this is happening.
In TST, style of the
-     Parent request is getting defaulted as “Dynamic”. Same is the case in PROD and PREPROD
-     Child request is getting defaulted as “Landscape”. In PROD and PREPROD, it is getting defaulted as “Portrait - For W2 Paper (2001 or later)”.
I have tried by explicitly setting the print style for the parent program to Landscape and the program completed normal. But the issue still persists.
Please help me out on this. Quick response is greatly appreciated.
Regards,
Uday

Hi,
What is the difference between the two instance? Is the TEST instance a clone of the PROD instance?
Please see if these documents help.
Note: 209813.1 - RGRARG FSG Reports Using a Content Set Print in Portrait Instead of Landscape
Note: 277038.1 - 11i : Oracle General Ledger Financial Statement Generator Setup Test
Note: 116495.1 - FSG Printing FAQ
Note: 1020095.102 - FSG - Printing Steps Simplified
Regards,
Hussein

Similar Messages

  • Error when print out SAP Crystal Report in SAP B1

    Dear all,
    I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
    Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
    On the other hand, there's no error when I print out the SAP Crystal Report on server.
    Can anyone advice on the error message as above?
    Thanks alot.

    Hi All,
    I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on.  I am facing the same problem,
    "Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
    I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
    Regards,
    Tom.

  • Error while printing (PDF) large BI reports

    Hello,
    We use ADS to print our BI reports from the portal. For small reports (10-20 pages) this works fine, but for very large ones (>100 pages) we get the error "Error while generating PDF" on the screen (after a considerable amount of time). In the defaulttrace, I can see this error:
    Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA exception when calling the PDF object after 261430 msec
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA exception when calling the PDF object after 261430 msec
         at com.sap.ip.bi.export.xfa.impl.Document.writePxxToByte(Document.java:687)
         at com.sap.ip.bi.export.xfa.impl.Document.writePdfToByte(Document.java:709)
         at com.sap.ip.bi.export.xfa.impl.PDFConverter.getBinaryContent(PDFConverter.java:160)
         at com.sap.ip.bi.export.impl.ExportController.getBinaryContent(ExportController.java:863)
         at com.sap.ip.bi.export.controller.ExportResult.getExportResult(ExportResult.java:103)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:73)
    I've checked the timeout settings for IRJ services (500 seconds) and the timeout settings for web service clients (900 seconds). This should not be the problem.
    Does anybody have a suggestion as to how to solve this?
    Kind regards, Wilbert

    Some additional information:
    In the defaulttrace, I can see this:
    Service XMLFormService: Native process (PID=15892) E:\usr\sap\PEP\JC00\j2ee\os_libs\adssap\XMLFormService\bin\XMLForm.exe terminated abnormally with error code 128
    Processing exception during a "Render" operation.
    Request start time: Fri Mar 06 10:11:55 CET 2009
    com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE
    Exception while connecting to <SERVER-IP>:3533
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method

  • Getting error while printing PDF from ABAP Report

    hi everyone,
    I am trying to print PDF form from a report. But the output i get is an error msg on the Paper
    ERROR: limitcheck
    OFFENDING COMMAND: PDF Parser: Damaged PDF file, failed reading trailer STACK:
    thanks.

    Some additional information:
    In the defaulttrace, I can see this:
    Service XMLFormService: Native process (PID=15892) E:\usr\sap\PEP\JC00\j2ee\os_libs\adssap\XMLFormService\bin\XMLForm.exe terminated abnormally with error code 128
    Processing exception during a "Render" operation.
    Request start time: Fri Mar 06 10:11:55 CET 2009
    com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE
    Exception while connecting to <SERVER-IP>:3533
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method

  • Error in print preview in ALV report

    Hi....All,
    Good Day.
    I have developed a ALV report. It is displaying all data properly. The problem is...
    When I am pressing the print preview button... it is getting dump.
    The dump short message is....... "Field symbol has not yet been assigned".
    Hope that I will get a solution from you as previous.
    With Thanks
    Sohel

    Do you use a field for coloring a column or cell?
    If the coding is not too large it could be helpfull to post the coding as well.
    Regards,
    John.

  • Error in running oracle report on APPS due to print style

    Hi
    i have an oracle report which displays about 550 rows of data...When i try to run it with oracle apps i selelect landwide but i get an error as the defined style can not print that much amount of rows.Is there any toher style which prints this many amount of rows or i have to create a new print style.
    thanks
    isha
    Edited by: 791666 on Aug 30, 2010 8:33 AM

    Please tell us about your product, version and Application Server type. You may also want to note that Oracle Apps is different from Oracle Application Server .
    Also intriguing is the error you report. Where and what exact error do you get? Error codes/messages need to be reported exactly (not paraphrased).
    Was that in displaying the info or in printing it to a printer?

  • Report error using landscape style, lines per page errors.

    Hi
    A Custom report(use character units in designer,11 X 8.5, stadard settings...) developed(reports 2.5 on apps 11), which was working fine previously using standard landscape. The report produces exactly 56 lines physically per page.
    Now, in applications ,landscape print style is properties changed, number of rows changed from 66 to 57.
    Now report gives error:
    'M_XXXX_GRPFR' is not fully enclosed by its enclosing object 'Body'. M_XXXX_GRPFR is the outer most frame in my report layout.
    (I tried increasing page size, etc, no use, same error)
    Now, I don't understand why it is giving error, as, it prints only 56 physical lines per page when I see the output file generated.
    Is that landscape is defined as 57 rows, but it is not exactly 57 physical lines? Because when I took out some stuff from report layout, which now produces only 45 physical lines, it is working fine.
    But, I have all 57 phyiscal lines in the report that I want it to work, any suggestions?
    Thanks
    Rathan.
    null

    Hi,
    Try this, i might work for you.
    <?for-each:Q1?>
    Here, place KIT ITEM Data table
    Below that:
    <xsl:variable name="no_of_lines_per_page" select="number(30)"/>
    <xsl:variable xdofo:ctx="incontext" name="invLines" select=".//Q2"/>
    <?for-each:$invLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    [here KIT COMPONENTS tabel will start]
    [In table first cell again start for-each group like below]
    <?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?> ---this is in table first cell
    [in rest of cells, put your columns xml tags]
    <?end if?><?end for-each?> - in last cell.
    this is end of Q2 table.
    After that put a page break
    <xsl:if xdofo:ctx="inblock" test="$start+$lpp<=count($invLines)"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if> -- page break outside the Q2 table.
    Now close the invlines for-each group
    <?end if?><?end for-each?>
    Close the Q1 for-each group.
    <?end for-each?>

  • Error when printing reports from forms in Linux

    Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
    The error, in the log from the reports server is:
    [2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
    f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=62204,
    java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
    ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
    java.lang.String moduleName="REP"
    at oracle.reports.utility.Utility.newRWException(Utility.java:604)
    at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
    at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
    at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
    at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
    at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
    at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
    at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
    at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
    at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
    at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
    at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
    at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
    at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
    at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
    [2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
    REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
    ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
    [2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
    [2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
    [2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
    [2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
    [2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
    [2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
    [2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
    [2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=50125,
    If anyone could help me, is important !
    Thx in advance
    Bruno Santos                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Raise a TAR I reckon

  • Error when trying to run an FSG Report via XML Publisher...

    hello.
    Hope someone can help.
    This is our first look into the benefits of XML Publisher in order convince Manager to start using it. Thing is, we really need to get both FSG reports and Dunning Letters working.
    We've currently got XML Publisher 5.0.0 and BI Publisher Template Builder for Word v10.1.3.2.0
    First up, FSG reports. Having followed this link here:
    http://solutionbeacon.blogspot.com/2007/07/simple-tutorial-for-publishing-fsg.html
    Ive managed to create a template based upon the basic FSG template supplied. I’ve follwed easy steps but on submitting the request against ANY [its what the notes said] FSG report the error messages from both the log and output files are given.. Those being..
    Output file displayed the most productive error message:
    DECLARE
    ERROR at line 1:
    ORA-06550: line 133, column 8:
    PLS-00306: wrong number or types of arguments in call to 'SUBMIT_XML_REQUEST'
    ORA-06550: line 133, column 5:
    PL/SQL: Statement ignored
    Can anyone help please? Or perhaps suggest an alternative to running FSG reports through XML Publisher.
    Other thought was, do I need any different versions and/or Publisher Enterprise installing?
    Many thanks for reading this..
    Steven

    ..having tried an alternative presentation I got a singular FSG report to generate in PDF via XML Publisher..
    www.darrylcarson.com/Dice/OVOAUG/MAY_2007/XMLP_and_RM.ppt
    question closed..

  • Error While Printing the Report

    Post Author: saqib
    CA Forum: .NET
    HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.  

    Try the following if your printer is a network printer
    1. Add Printers - select Local Printer
    2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
    3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
    4. Select the printer and printer type in "Add Printer" wizard.
    5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
    Hope this helps..
    Yogesh
    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

  • Error print preview a crystal report

    Hi,
    I have an issue where i log in as a user with admin rights and try to print preview a crystal report that was created. It prompts me to log into the database, when i do this gives me a login incorrect oracle error. But when i log in as administrator i am able to do this.

    Hi,
    Additional Info:
    CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
    Balaji K

  • Error in Print Report.vi

    I get "Unknown Error in Print Report.vi", error code -2147352567 when I run Text Report Example.vi in LabVIEW 6.1. My own code that ran OK in LabVIEW 6.0.2 also produces this same result in V6.1. I have not changed printers. Help.

    Hi.
    I don't have exact solution for your problem, but it is very familiar to what I experienced.
    I install 6.1 and Report Generation toolkit included with new package. I had all my programs written in 6.0.2 with Report Generation from version 1.0.
    Almost every other VI from Report Generation did not work after I recompiled my VI into Labview 6.1. I spent several days trying to understand what is going on, made several calls to NI tech support, but nobody could help me. Finally I found solution:
    Uninstall New Report Generation toolkit Version 1.0a included into latest package of Labview 6.1 and install the very first version (I have it distributed as separate CD).
    After such maneuver everything works fine.
    I had another problem with this tool and especially Pri
    nt report.vi:
    I have PDS package, and Print report.vi works excellent on my computer printing Standard Report. However when I create stand-alone application and distribute it together with run-time engine on user computers, it gives me error and I can only print creating Excel or Word type of report.
    So, that is my experience. I think NI still has several bugs to work on. And if you find any other solutions, please let me know.
    Good luck.

  • Error when trying to run "Program - Publish FSG Report"

    We're using 11i (11.5.10.2) version
    I am trying to run 'Program - Publish FSG Report' but receiving the following error message in the View log file on "Financial Statement Generator (XML Report Publisher)".
    XML Report Publisher 5.0
    Updating request description
    Waiting for XML request
    Retrieving XML request information
    Preparing parameters
    Process template
    --XDOException
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
         at java.lang.reflect.Method.invoke(Method.java:611)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:473)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:188)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
         at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1497)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:913)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:1766)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1277)
         at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
    Caused by: oracle.xdo.parser.v2.XMLParseException: End tag does not match start tag 'fsg:RptLine'.
         at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
         at oracle.xdo.parser.v2.XMLReader.popXMLReader(XMLReader.java:526)
         at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1287)
         at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
         at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
         at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
         ... 16 more
    Ref Publish FSG: Error: XML: XDOException, End Tag Does Not Match Start Tag [ID 339009.1]
    I tried to apply the patch#12700905, then retest the issue, but I receiving the following error message in the output file on "Program - Publish FSG Report"
    DECLARE
    ERROR at line 1:
    ORA-06550: line 133, column 8:
    PLS-00306: wrong number or types of arguments in call to 'SUBMIT_XML_REQUEST'
    ORA-06550: line 133, column 5:
    PL/SQL: Statement ignored
    Has anybody can help me?
    Thanks
    Sam

    Hi Sam.
    You will need to apply Patch 5728162 . To see the complete solution see MOS Doc ID 787396.1
    Hope this helps.
    Octavio

  • Custom print style to copy output file of report to desired dir

    Hi All
    We have a requirement to Copy output of Custom AR Invoice (BI Publisher) report to dir which is done vide print Style (Print MAchine) which copies file to desired dir
    This functionality was used in 11i (Ver 11.5.10) and it's working fine, when we moved to R12 (Ver 12.1.3) Some how this functionality is not working as expected but
    when we use this print style with other BI publisher reports it's working fine not sure what is the issue here.
    Regards
    Kamalakar.G

    This forum is meant for discussions about OTN content/site and services.
    Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
    Product forums:
    http://forums.oracle.com/forums/index.jsp?cat=9
    Technology forums:
    http://forums.oracle.com/forums/index.jsp?cat=10

  • The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

    I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

    This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
    1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
    2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
    Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
    menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
    Troubleshooting.
    3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
    4.These errors are most often fixed with the latest
    video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
    e error persists. If the problem is printer related, try another printer.
    5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

Maybe you are looking for