Error in process chain activation
HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanks
Hi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...
Similar Messages
-
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa. -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Why process chain activation is taking more time?
Hi BW Gurus,
I am going to activate the process chain, but it takes more time to activate the process chain . What may be the reasons ?
Regards,
RajuHi,
Process chain activation becomes slow due to the following reasons.
1)Large no of entities in RSPCCHAIN Table i.e, there is lot of process chains and very large process chains.
2)There is a missing index for the RSPCCHAIN Table.
Solution for this problem is we have to create an index for the following fields of the RSPCCHAIN table.
EVENT_GREEN
EVENT_PGREEN
EVENT_RED
EVENT_PRED
Still if you want further clarification on this , Refer the following sap notes.
906512---Activating process chain is very slow.
Related Notes: 872275, 872273& 872271 .
Regards,
Chendrasekhar -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
ODS activation process random error in process chain
Dear All,
In my process chains, the process of ODS activation is sometimes in error. It is a random error, it is not always the same ODS and process chain.
The message error is DBIF_RSQL_SQL_ERROR.
I noticed that, on right-clic -> Change variant to the process of ODS activation, I have the following message:
"Not all infoobjects can be read".
For information, in the processes of activation of the ODS, the unique parameter is the name of the ODS to be activated.
Thank you very much for your help,
ArnaudHi......
Check SAP Note : 631668......
According to this note :
Symptom
This note applies only to BW systems under ORACLE.
Loading data into InfoCubes terminates with an error: ORA 60, "deadlock detected". The monitor log displays the entry "CALLER 70 missing" and the request is flagged as red.
Other terms
Caller 70, DEADLOCK, ora0060, bitmap, indexes, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
Reason and Prerequisites
In SAP BW, there are two fact tables for including transaction data for Basis InfoCubes: The F and the E fact table.
Unlike the E fact table, the F fact table contains the information about the request from where the transaction data originates.
Therefore, transaction data is always written to the F fact table and the package dimension contains the request to which the loaded data belongs.
Using 'Request compression', the system reads the data of a request from the F fact table and writes it to the E fact table without request ID and compresses.
For good reporting performance, you must keep only the data of a few requests in the F fact table since the F fact table is partitioned according to the key of the package dimension and the data of all requests is always read. Therefore, you should compress the request if you are sure that the loaded data is correct and that you no longer have to delete the request.
When you install BW on an ORACLE database, BITMAP indexes are created on the fact tables to improve the reporting performance of the system.
These have a negative effect on the performance when loading data and the deadlock mentioned above (ORA 60) may occur as a result. The DEADLOCKs occur during parallel insert operations because ORACLE does not support a blocking concept for BITMAP indexes at data record level.
Solution
Before loading movement data, delete secondary indexes from the F fact table and create them again after the loading process. If the F fact table is small, no performance problems occur.
Alternatively, you can also load requests serially into InfoCubes by first loading the data only into the Persistent Staging Area (PSA) and then serially into the InfoCube. If you use the data transfer process (DTP) for loading in BW 7.0, this option is no longer available.
NOTE
This avoids the deadlock problem. However, you should note that after some loading processes, it is necessary to reorganize the BITMAP indexes because they degenerate very heavily and, therefore, the read and writing performance deteriorates dramatically.
Hope this helps you.....
Thanks==Points as per SDN.........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 29, 2008 3:14 PM -
ERROR IN PROCESS CHAIN WHILE ACTIVATING
HELO EXPERTTS,
I WAS ASK TO TEST AN PROCESS CHAIN IN DEVELPOMENT SER WHICH WAS ALREADY PRESENT IN THE PRODUTION SERVER , WHEN I EXECUTED THE CHAIN IN DEVELPMENT SERVER ATRANSPORT REQUEST WAS GENERATED AND MOVE TO THE TRANSPORT QUE.
WHEN I TRY TO RUN CHAIN IN THE PRODUCTION SERVER I GET THE FOLLWING eRROR
1) Invalid call sequence for inter faces when recording changes
I FOUND OUT THAT THE REQUST GENERATED IN A DEV SERVER FOR TRANSPORT IS RELEASD BY BASIS I GET THE FOLLWING ERROR WHEN IAM TRYED TO RUN CHAIN AFTER RELASING THE TRANPORT
2)System setting does not allow changes to be made toDo you have auth to do so ? { Choose 'Display object' or 'Cancel' }
Are all the steps correct in the chain ? -
Process chain activation error in BI7...
hi gurus,
we are creating process chain for master data for
0PROMOTION_ATTR
0PROMOTION_TEXT
0SALESORG_ATTR
0SALESORG_TEXT
0CUSTOMER_ATTR
0CUSTOMER_TEXT
0VTYPE_TEXT
0DIVISION_TEXT
0SALES_GRP_TEXT
0DISTR_CHAN_TEXT
0CUST_GROUP_TEXT
0SALES_OFF_TEXT
0MATL_GROUP_TEXT.
we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
Chain has no starter. Add a starter.
Message no. RSPC020
Diagnosis
The process chain has no start-process. A process chain always requires exactly one general starter.
System Response
The system is unable to activate the process chain.
Procedure
Add a general starter to the chain, and schedule it as the first process in the chain.
please suggest me how to rectify the problem.
regardsHi Harish,
Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
Regards
Srini -
Process Chain Activation Error
Hi Experts,
We are Transferring Data from Flat file to Infocube using PROCESS CHAIN..
Process chain Formation:
Start -
>> Infopackage----->>Delete Index--->>DTP--
>>Create Index
While Connecting START Variant with Infopackage i am getting following Error....
Access via 'NULL' object reference not possible.
A Short Dumb Created Contains Following Messages
Error in the ABAP Application Program
The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Note :
1. we are also try to drag the start variant with Infopackage it is not connected .
2. Datasource and Infopackage are Delta Enabled.
Need Solution?
ThanksHi ,
We are allready give our file in Transaction Code : AL11 ==> DIR_HOME , But Same Error Coming ?
What is the Problem?
Thanks
Maybe you are looking for
-
Manual Deployment of Java Class's to Database
I was using JDeveloper, now my company has bought JBuilder 4.0, Can any one tell me how deploy my class's manually becuase JBuilder doesnt support deployment=(
-
How to get the ACCOUNTING_FLEXFIELD Name in a Multi Ledger Instance?
Hi, How to get the <ACCOUNTING_FLEXFIELD> Name in a Multi Ledger Instance from logged-in Responsibility? Is there any profile option available? SELECT id_flex_num INTO l_structure_num FROM apps.fnd_id_flex_structures WHERE ID_FLEX_CODE = 'GL#' AND ID
-
User equivalence check failed for user "oracle".
Hi, I am trying to install the Oracle Clusterware 10g as part of my RAC setup. I have configured RHEL 4 in 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the below error: [oracle@rac cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n
-
I'm trying to create a simple batting average calculator that displays an average in a dynamic text box assigned to the variable "avg" everytime the "button" instance is pressed down. No matter how many times I try this, I get "NaN" to show up as the
-
Help Windows 10 - Microphone not working
Hello, I recently installed Windows 10 then i installed Skype on it. I use an Asus R510LB laptop with built-in microphone, a Realtek (high definition audio) I have an issue: my microphone doesn't work with Skype or maybe is not detected, or probably