Error in process Chain at 'AND' Step
Hi,
I have a Process chain which has different process which are activating different DSO's plus a loading data to a DSO in same level of Process chain. Now the next process is AND step, which will be executed if all the above process are successful.
Now all the activation step are sucess and also loading the DSO, but still there is a error in AND step. Error message is 'Job cancelled after system exception ERROR_MESSAGE'. And one more thing is the previous step of DSO loading data loaded successfully, but in details tab, Last step is showing the message as 'Process Chains: Errors Occured'. But the data is transferred and added in the target.
Please suggest what will be the cause for this error.
Regards,
Vishnu
Edited by: Vishnuvadhan K on May 9, 2008 9:12 AM
Hi,
you are talking about monitor details tab or process chain details tab?
'Process Chain: errors occured". you will get this msg at monitor details tab bcoz data has been loaded to ODS through process chian, even the load is successful but the chain is not yet completed successfully. so once the chain is success this msg will trun to green. try to figure about the error and rectify it.
did you repeate the AND process to execute next process in process chian.
if you didnt get repeate option you can try with RSPC_PROCESS_FINISH in SE37.
Similar Messages
-
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Error in process chain :hierarchy
Hi,
I am working in BI 7.0..i am getting the following error in DTP Process of process chain
Error Message:Node ID 1 occurs more than once in the hierarchy table.
Please guide me how to solve.
Regards,
Visali.GHi Vaisali,
Your question is not clear, can you please tell us at what level the you are getting this perticular error in the Process chain.
To the extent that i understood is that when you try to put the DTP while you create the process chain.
If this is correct then i feel like that you are trying to insert the same DTP twice in creation of the process chain.
And more over change the display to Graphical mode rather that the Netwok mode while you display the Process chain in RSPC T-code.
Best Regards,
VNK. -
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
Transport error in process chain
Hi to all,
Could someone help me out on my problem? I changed process chain in and request for transport. but am getting errors when I transported them.
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain ZOA_PC12A_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12A_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12B_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12B_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC3C_D_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC3C_D_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC5_M_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC5_M_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC92_INIT_TXN was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC92_INIT_TXN Was Activated And Scheduled
Can someone tell me what am i going to do next? thanks
Regards,
jasperHello again,
My problem is resolved. I am in SP17 and I applied a few SP18 notes:
0001002791
0001077030
0001139653
0001147587
0001147766
I then re-transport the request with the DTP and process chain. The expected result is the dtp in the process chain should be pointing to the new dtp. CHeers.
HWS
Edited by: Ho Wei Siong on Aug 14, 2008 3:35 PM -
Process chain tables and tcodes
Hi frinds,
can any one send me the process chain tables and tcodes . plzz
regards,.
rajesh
my mail id is [email protected]Hi Rajesh,
Process chain tables:
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Regards,
R.Ravi -
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa. -
Process chain creation and which are the module depending
Hi Expert,
I have confusion on process chain creation and triggering the process chain also same of the module are depending other module what those. What are thing we take consideration Please guide me in this regards .
Regards,
Ravi
Edited by: Ravichendra k on Oct 15, 2008 11:48 AMHi,
Here are a few links about process chains. Hope it helps.
http://help.sap.com/saphelp_nw04/Helpdata/EN/67/13843b74f7be0fe10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtocreateaprocesschain&cat=sdn_all
http://sapbwneelam.blogspot.com/2007/09/how-to-start-process-chain-through.html
Regards,
Gaurav -
Error in Process chain while deleting index and create index
While executing the process chain for delete index the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
Please help me in solving this issue.
Thanks & Regards,
BharathiHi,
Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
You can also use RSBKREQUEST table to check the request and its corresponding data target.
This request is either red or yellow caused this failure.
Hope this helps.
Regards,
Maybe you are looking for
-
How can I get a frame accurate output to tape using Premiere Pro CS6 and a Blackmagic Decklink Extre
i can set the frame offeset inside the Export to tape tool (which BTW is horrible, you can't scrub, you MUST use ":" or ";" in the timecode fiellds or the deck just goes to the beginning of the tape etc), but I'm still 12 frames off. there is a fram
-
Problems installing pse 8 on macbook pro
I'm trying to install pse8 on my new Mac Book Pro and keep getting an error message saying that Firefox is running and I cannot install until that program is closed. Only problem is firefox is not running. Has anyone come across this problem before
-
Hi All, While generating the above report transaction ,account number ,profit centre is not appearing only text is shown. As per my business requirement ,i would like to assign GL acount number ,Profit centre Number ( Not Rext) Is it possible to retr
-
Installing All (9iDB,9iDS and report server) in same machine
I want to use one machine only. I have installed 9i database, and on same 9iDS. and created a report server on same machine i am facing a problem all application runs very fine but on running report from forms by using webs.show_document() a new page
-
Sql reporting service not start
when i try to start the service sql server reporting services(SQLEXPRESS2) then it shows me "The Sql Server Reporting Sservices on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or pr