Error in Process chain creation

Hi All,
My dataflow is:
R/3---ODS--Cube.
R/3 to ODS is Daily Load
ODS to cube is Monthly Load.
I am planning to create 2 process chains.
One I did from R/3 to ODS with following Processes.( This Chain Is OK)
Start----Execute ODS Infopackage--
ODS Activation.
Second One with (Error)
Start-----Further Processing--Delete IndexLoad Data--Create Index.
When I click on Checking View I am getting Red mark on Load data Process.
WHen I take Further Process as variant It proposed Activation of DSO process Again, I removed that process.
Details of the eRROR IS: Infopackage ZPAK_**is generated, Not able to be used as Loading variant.
Can ANy body help me on this and what could be the best way to create chain for this flow.
Regards,
Madhu

Hi Friend,
Q. Second One with (Error)
       Start-----Further Processing--Delete IndexLoad Data--Create Index.
A. The Flow should be :
       Start  - > Delete Index for Cube  - > Load Data (IP to load from ODS to Cube)  - > Create Index for Cube.
Hope this helps.
Regards
Hemant Khemani

Similar Messages

  • Error in process chain creation :  SET SCREEN not allowed in subscreens

    Hello,
    We are getting an  Error in process chain creation  :  SET SCREEN not allowed in subscreens  SAPRSSM 0100.
    Please give a solution. Thanks in advance.
    RR.

    Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

  • I am getting an error in process chain in bw 3.5?

    Hi all,
    I am getting an error in process chain in bw 3.5?
    @5D@     A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th     @35@
    I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
    Why does further update ods gets selected automatically?
    Thanks
    pooja

    Hi Pooja
    Are you talking about update ods object data?
    Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

  • Error in Process chain( Urgent Please )

    error in Process chains:
    My Process Chain errors out in the step to activate the ODS after loading data inot it.
    The loading is correct and green. The Activation step errors out .
    Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
    I get message like this :
    Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
    Message no. RSMPC129
    Diagnosis
    Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
    System response
    The return structure is corrected and the data package is marked as incorrect.
    Message was edited by:
            Chris Gokul

    Chris,
    Looks like a request has not got deleted properly from the table :
    Options that you could look at :
    1. Delete all the data from the ODS and load again ( if that is an option )
    2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
    Also please mention your BI version and patch level.
    Arun

  • Error in Process Chains

    Hi APO Gurus
    I am getting following error in Process Chain :
    1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
    2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
    3  Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
    Can anyone guide  through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
    Amit

    Hi All,
    Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
    Now I get another error in the Load Data process of the process chain. the errors are as follows:
    1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
    Diagnosis: File  /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
    2. @5C@     Errors in source system     @35@
    3. @5C@     Error 1 when loading external data     @35@
    The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
    ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
    Can anyone explain wht the problem could be?
    THank you

  • Error in process chain pushing step

    Hi Experts,
    We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
    Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
    Best Regards
    Venkat...

    Hi Ram, thank you for the quick response.
    Yes, at source, all requests are available for reporting.
    Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
    PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
    Daily, it's working fine. Unfortunately, today failed
    Any insights please...
    BR
    Venkat...

  • Error in Process Chain for Delta pack

    Hi All,
    Here I am facing error in process chain for delta pack.
    Error:
         Last delta upload not yet completed. Cancel     I     
    Please send me the solution asap.
    Thanks

    Hi,
    This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
    Refer
    Last delta update is not yet completed
    Last delta update not yet completed-PC Chain Error
    Last Delta Not Yet Completed
    This is the same issue as yours.
    Thanks,
    JituK

  • Errors in process chain

    hello gurus,
    what are regular errors in process chain during data loads?

    Hi,
    Mostly we have
    No SID values
    Error in transfer structure
    Error in source system
    Trfc Error
    Time stamp Error
    Error occured due to short dum[p
    Job cancellation in R/3 system
    DSO Activation failed
    caller70 is missing
    Attribute change run failed
    Table space issue
    Regards,
    Marasa.

  • Process chain creation and which are the module depending

    Hi Expert,
    I have confusion on process chain creation and triggering the process chain also same of the module are depending other module what those. What are thing we take consideration Please guide me in this regards  .
    Regards,
    Ravi
    Edited by: Ravichendra k on Oct 15, 2008 11:48 AM

    Hi,
    Here are a few links about process chains. Hope it helps.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/67/13843b74f7be0fe10000000a114084/content.htm
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtocreateaprocesschain&cat=sdn_all
    http://sapbwneelam.blogspot.com/2007/09/how-to-start-process-chain-through.html
    Regards,
    Gaurav

  • BW: Not getting Dump For Program error in Process Chain

    I have one issue regarding Master data loading issue in BW(3.5).
    My business flow like we have received data from server A and Server A extract data from Server B and
    Server B which is extract data from source(R/3).
    Flow like this R/3-->Server B-->Server A(ETL) -
    > My Server.
    We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
    Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
    But lastdays process chain paticular process stills remains yellow?
    We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
    Note: it will be helpful for me  if any one know how to check dump for program errors in Process chain as narated issue.

    Guys, I am also facing the same issue.
    When DTP is completed successfully, it has the job log blow :
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    When it fails or remain yelllow for long time and then turn into red.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    The question is, why the program  RSBATCH_EXECUTE_PROZESS is not scheduled.  Is it because there is no free resource? Or poor response from SAP ECC?
    Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
    Regards
    MultiABAP
    Edited by: MultiABAP on Oct 6, 2010 10:32 AM

  • Data load Error using Process chain

    Hi,
    In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
    Thanks.
    Param

    Hi Victor,
    Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
    Communication error: call FM RSSDK_DATA_REMOTE_GET
    Thanks in advance for your help!!
    Sandeep

  • Index Creation wrong error in process chain

    Hi Experts,
    One of my process chain got failed due to following error:
    "Index creation in Infocube got wrong"
    can anyone help,how to resolve this issue?
    Edited by: Nirav Shah on Dec 21, 2007 7:05 AM

    1)You can even see the INDEX in DB02 t.code
    2)Goto Cube -> Manage -> Performance TAb -> Repair Indices (you can see all the index related statuses hre, like check indexes, repair indexes, you will get the green/red status here if you got green status no worries, if red you can rebuild indexes)
    3) You can read the message from Process logs and you can find out some solve issue from there also
    Edited by: Aduri on Dec 21, 2007 7:10 AM

  • Process chain creation: error:

    Hi,
    i am creating process chain for the data upload of three info packages!
    Two are master data IPs and one is transactional data IP. ( Requirement is to make single process chain for the master data and transactional data ).
    Before transactional data upload, i had included the process delete indexes.
    When i check the process chain, it says:
    "process DROPCUBE variant is referenced but not in the chain "
    May i know what is wrong with this process flow? i had actually done similarly in dev system it was not giving any error:
    Please suggest me
    Thanks,
    Ravi

    Hi Ravi,
    Did you go for Meta chain, if not please try that. Be a bit clear on the question.
    regards,
    ashok.

  • Error in process chain :hierarchy

    Hi,
    I am working in  BI 7.0..i am getting the following error in DTP Process of process chain
    Error Message:Node ID 1 occurs more than once in the hierarchy table.
    Please guide me how to solve.
    Regards,
    Visali.G

    Hi Vaisali,
    Your question is not clear, can you please tell us at what level the you are getting this perticular error in the Process chain.
    To the extent that i understood is that when you try to put the DTP while you create the process chain.
    If this is correct then i feel like that you are trying to insert the same DTP twice in creation of the process chain.
    And more over change the display to Graphical mode rather that the Netwok mode while you display the Process chain in RSPC T-code.
    Best Regards,
    VNK.

  • Infopackage deleted - error in process chain

    Helle experts,
    I have a problem in process chain.
    Today the log advices an error because an Infopackage (that is used in the chain) was deleted yesterday; in fact, in the chain there is an other name for the Infopackage (first question: is this automatically generated?).
    It seems that none deleted it.
    Can you help me, please?
    It's urgent
    I think that the problem can be resolved with the creation of a new Infopackage with the same features of the precedent, but I don't understand the cause of the problem.
    Thanks,
    regards, Vito

    Hi,
    you can check in the log what went wrong for this InfoPackage: transaction SLG1, object RSSM, subobject SDL, external ID = *.
    What kind of name do you have in your chain? Is it a generated name or a name one of you typed for the IPack.
    In a chain some of the packages are generated automatically depending on the process you drag in your chain.
    Creating a new IPack with the same name would work I think, if the package in your chain is not a generated one. If it is a generated IPack, then create a new IPack and drag it in your chain.
    Hope this helps,
    Olivier.

Maybe you are looking for