Error in process chain variant

Hi all.
I get an error "Variant ALL is not persistent" when I try to add the "Adjustment of Time-Dependent Aggregates"(TIMCHNGRUN) process type to mye process chain. The error message is RSPC023. I am unable to change the variant, or create a new one. I get the same error if I try.
I suspect that this variant is corrupt or something like that. Any help on this one?
Regards
Oyvind Reinsberg

Hi,
Thank you for your reply. But how can I delete a process chain variant?
Regards
Øyvind Reinsberg

Similar Messages

Error in process chain variant when executing BI IP planning sequence

Hi All,
I am trying to execute a planning sequnce as a background job using a process chain. Here one of the variant failed giving an error as : Overflow occurred when calculating <Key figure name> with value 6.5231044352058409E18+.
I tried executing that process chain variant separately using the ABAP program RSPLS_PLSEQ_EXECUTE as a background job, but still its not working.
At last I tried executing the individual planning step in the planning modeler, but again the same error.
Earlier such case was resolved by compressing the planning cube requests and executing the failed variant using the ABAP program, but this time even compression is not helping to solve this.
Can anyone please help on this issue ?

Hi Andrey,
This Key figure is created of the data type CURR (Stored as decimal) for Amount type. Now the length of CURR is maintained by SAP as 17 with 2 decimal places, so do you mean that I have to switch to other data type to hold the large value that is getting generated.
My concern is : the error is coming for just one of the variant of the chain and not for other variants. If it has something to do with the KF data type, then certainly all others variants must have thrown the same error.

Error in process chain pushing step

Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...

Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat...

BW: Not getting Dump For Program error in Process Chain

I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

I am getting an error in process chain in bw 3.5?

Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
pooja

Hi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

Error in Process chain( Urgent Please )

error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris Gokul

Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun

Error in Process Chains

Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
Amit

Hi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@     Errors in source system     @35@
3. @5C@     Error 1 when loading external data     @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Errors in process chain

hello gurus,
what are regular errors in process chain during data loads?

Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa.

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

How to delete Process Chain Variant

Hi all~
I'd like to delete Process Chain Variant .
But I can't find delete menu from RSPC.
It could be easy, but... I can't find it~ ^^;;
Thank you in advance~ ^^;;

Hello,
1. Select the necessary process type from the menu.
2. Type in the technical name of the variant and click change button.
3. When maintenance screen is opened you can delete the variant by clicking delete button.
or
chk the tables for your variants :
RSPCVARIANTATTR
RSPCVARIANT
RSPCVARIANTT
RSPCTRIGGER
Or you can go to maintain variant for any existing variant and choose your variant form the list, delete it.
Regards,

Process Chain Variant

Hi All,
We are using BW 3.5. We have a scenario where we are loading data from a Source ODS to one Target CUBE and one Target ODS. I have created the Delta Initialization for the Datamart Infosource and the Data got loaded to cube and ODS simultaneously. In both the target data was ready for reporting. Then I did a delta update, data got loaded to both but was ready for reporting only for Cube but not for ODS.
The Process chain which loads the Source ODS has Further Processing step but it's not taking care of Activating the Target ODS. Should I create a Process Chain variant to Activate the ODS separately?
Please suggest. Thanks.
Vivek

Hi,
In the PC after the step where you have loaded data in the DSO you have to create a ACR to activate the DSO.
Do this:
Go to process types, select other BW processes. In that select 'Attributr Change Run' and drag it.
Create a variant for it. Then it will ask you for the Object type, there you have to give the name of the DTP or the info package whichever is loading data into the DSO. Finally click on save.
This will ensure the DSO is activated after it is laoded.
Hope this helps.
thanks,
rahul

Data load Error using Process chain

Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
Param

Hi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep

Delete Indexes Variant ended with errors in Process chain

Hi experts,
I have a process chain which executes dialy to load data Info Cube we create the index and finally we delete the index after that we have few variants..
Remaining all variants are executed with out errors except delete index variant I checked the error message it shows that <b>" The system has not finished loading request APO_R46PWZHRIA7JS9NOM8X879QEZJ into data target ZUP_CARF1"</b>
It is so happened weekly twice or trice not every day. one day it was running with out any errors and one day this process chan was ended with errors.
I need to know the reason why this variant was executed with errors.?
I need your valule sugestions regarding this issue.
Regards
sailekha

hi sailekha,
therevare some functional constraint of processes.
while deleting indexes
it is not possible to:
                              loading
                              indexes are being built
                              stastics are being built
                              during rollup
                              while compressing
                              while updating.
my be u can check which is the other process chain that does all above oprations in concerned infoprovider.
bye

Process chain variant for Acivaton of DSO error!!!

I have a data flow which has three data sources A B C ...A and B are connected to DSO X and C is connected to DSO Y,
DSO X and Y are again connected to DSO Z....DSO Z is connected to Final Target (Info Cube M).
Now Iam created a Process chain ...After Start Variant Iam running the Delta Info Packs for B and C (A's Delta Info pack runs in some other chain).
Then using Update from PSA for A B C ...using AND for A&B PSA to load in to DSO X...paralelly I used C PSA update in to DSO Y...Then used AND to load X& Y to Z...
When I run the process chain it runs good twice...we created a job in SM37 to run this job for every 4 hours....when I come back and see ...DSO X has data loaded and activated
But DSO Y loaded the data but activation doesnt took...When I see the Process chain logs its giving the following error msgs.
                                    - 1 -
      Request REQU_D3DR8GR9CPUIA56IMER47VWW7 (0000060949) is not
      available in data target. No PSA process possible.
Like this error each chain is showing error messages with the request numbers which are already activated in DSO.I donno when the req is already there as active why activation looking for that old req?
I fixed it by manually updating the DSOs and Cube...Can anybody let me know how to fix this in Process chain.
Thanks for the help in advance

I think you may have a timing issue, as when you perform this update manually there is no issue's.
I would suggest you load both ODS's then you activate the data on both, then you have the AND step once both have been activated to then feed the data to the subsequent Infoprovider.
This should resolve your issue.

Error in process chain variant

Similar Messages

Maybe you are looking for