ERROR IN PROCESS CHAIN WHILE ACTIVATING

HELO EXPERTTS,
I WAS ASK TO TEST AN PROCESS CHAIN IN  DEVELPOMENT SER WHICH WAS ALREADY PRESENT IN THE PRODUTION SERVER , WHEN I EXECUTED THE CHAIN IN DEVELPMENT SERVER  ATRANSPORT REQUEST WAS GENERATED AND MOVE TO THE TRANSPORT QUE.
WHEN I TRY TO RUN CHAIN IN THE  PRODUCTION SERVER I GET THE FOLLWING eRROR
1) Invalid call sequence for inter faces when recording changes
I FOUND OUT THAT THE REQUST GENERATED IN A DEV SERVER FOR TRANSPORT IS RELEASD BY BASIS I GET THE FOLLWING ERROR WHEN IAM TRYED TO RUN CHAIN AFTER RELASING THE TRANPORT
2)System setting does not allow changes to be made to

Do you have auth to do so ? { Choose 'Display object' or 'Cancel' }
Are all the steps correct in the chain ?

Similar Messages

  • Error in Process Chain while extracting data from source system

    Hi All,
    Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
    Please let me know why this error is coming for first why it is not coming after repeating the step?
    Thanks & Regards,
    Murali.

    Hi Murali,
    Hope you are doing good..
    Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
    Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
    If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
    As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
    Regards,
    Anil Pragada.

  • Error in Process chain while deleting index and create index

    While executing the process chain  for delete index  the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
    Please help me in solving this issue.
    Thanks & Regards,
    Bharathi

    Hi,
    Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
    You can also use RSBKREQUEST table to check the request and its corresponding data target.
    This request is either red or yellow caused this failure.
    Hope this helps.
    Regards,

  • Error in Process Chain while loading Master data text?

    Hello All
    Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
    Heard that v can restart the process in debug screen?can anyone let me know how to do this?
    Many Thanks
    balaji

    Hi dear,
    you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
    Hope it helps!
    Bye,
    Roberto

  • Error in Process chain( Urgent Please )

    error in Process chains:
    My Process Chain errors out in the step to activate the ODS after loading data inot it.
    The loading is correct and green. The Activation step errors out .
    Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
    I get message like this :
    Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
    Message no. RSMPC129
    Diagnosis
    Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
    System response
    The return structure is corrected and the data package is marked as incorrect.
    Message was edited by:
            Chris Gokul

    Chris,
    Looks like a request has not got deleted properly from the table :
    Options that you could look at :
    1. Delete all the data from the ODS and load again ( if that is an option )
    2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
    Also please mention your BI version and patch level.
    Arun

  • Error in Process Chain for Delta pack

    Hi All,
    Here I am facing error in process chain for delta pack.
    Error:
         Last delta upload not yet completed. Cancel     I     
    Please send me the solution asap.
    Thanks

    Hi,
    This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
    Refer
    Last delta update is not yet completed
    Last delta update not yet completed-PC Chain Error
    Last Delta Not Yet Completed
    This is the same issue as yours.
    Thanks,
    JituK

  • Errors in process chain

    hello gurus,
    what are regular errors in process chain during data loads?

    Hi,
    Mostly we have
    No SID values
    Error in transfer structure
    Error in source system
    Trfc Error
    Time stamp Error
    Error occured due to short dum[p
    Job cancellation in R/3 system
    DSO Activation failed
    caller70 is missing
    Attribute change run failed
    Table space issue
    Regards,
    Marasa.

  • BW: Not getting Dump For Program error in Process Chain

    I have one issue regarding Master data loading issue in BW(3.5).
    My business flow like we have received data from server A and Server A extract data from Server B and
    Server B which is extract data from source(R/3).
    Flow like this R/3-->Server B-->Server A(ETL) -
    > My Server.
    We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
    Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
    But lastdays process chain paticular process stills remains yellow?
    We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
    Note: it will be helpful for me  if any one know how to check dump for program errors in Process chain as narated issue.

    Guys, I am also facing the same issue.
    When DTP is completed successfully, it has the job log blow :
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    When it fails or remain yelllow for long time and then turn into red.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    The question is, why the program  RSBATCH_EXECUTE_PROZESS is not scheduled.  Is it because there is no free resource? Or poor response from SAP ECC?
    Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
    Regards
    MultiABAP
    Edited by: MultiABAP on Oct 6, 2010 10:32 AM

  • Data load Error using Process chain

    Hi,
    In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
    Thanks.
    Param

    Hi Victor,
    Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
    Communication error: call FM RSSDK_DATA_REMOTE_GET
    Thanks in advance for your help!!
    Sandeep

  • I am getting an error in process chain in bw 3.5?

    Hi all,
    I am getting an error in process chain in bw 3.5?
    @5D@     A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th     @35@
    I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
    Why does further update ods gets selected automatically?
    Thanks
    pooja

    Hi Pooja
    Are you talking about update ods object data?
    Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

  • Error in Process Chains

    Hi APO Gurus
    I am getting following error in Process Chain :
    1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
    2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
    3  Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
    Can anyone guide  through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
    Amit

    Hi All,
    Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
    Now I get another error in the Load Data process of the process chain. the errors are as follows:
    1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
    Diagnosis: File  /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
    2. @5C@     Errors in source system     @35@
    3. @5C@     Error 1 when loading external data     @35@
    The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
    ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
    Can anyone explain wht the problem could be?
    THank you

  • Error in process chain pushing step

    Hi Experts,
    We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
    Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
    Best Regards
    Venkat...

    Hi Ram, thank you for the quick response.
    Yes, at source, all requests are available for reporting.
    Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
    PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
    Daily, it's working fine. Unfortunately, today failed
    Any insights please...
    BR
    Venkat...

  • Error in process chain creation :  SET SCREEN not allowed in subscreens

    Hello,
    We are getting an  Error in process chain creation  :  SET SCREEN not allowed in subscreens  SAPRSSM 0100.
    Please give a solution. Thanks in advance.
    RR.

    Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

  • Why can't we change and activate a process chain while it is running?

    why can't we change and activate a process chain while it is running?

    Hi.........
    Yes u can activate the changed PC...............but don't schedule it...........
    If u schedule the Chain............when the current chain is running..............it will get stucked in the process..............which was executing ........at the time when it was scheduled.............
    I thnk u hav made some chainges in the PC in Planning mode.............right...............Activate it............after the completion of the current run of the chain............schedule the chain........
    Regards,
    Debjani.........

  • How to identify whether that particular process chain is active or not?

    Hi all,
    How to identify whether that particular process chain is active or not ?
    thanxs
    haritha

    If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
    RSPCCHAIN
    RSPCCHAINT
    to check the logs
    RSPCLOGS               
    RSPCPROCESSLOG
    Give the chain name and check in the object version.
    Khaja

Maybe you are looking for