Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

Similar Messages

  • Error occured in the data selection while extract data from Source system

    Hello Friends
    i am facing Problem while extracting data to Biw System from SAP R/3 system
    The error mesage is 'Error occured in the data selection '
    i.e. Monitoring - Details tab - Extraction - With error

    Hi
    The delta wil take the Last init selection for loading data in to the BW...
    Did u check the IP at the Update tab is it the correct delta only.. or its a full..
    better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
    regards
    CK
    PS: CHECK THE INIT SELECTIONS TOO  or do an init with outdatatransfer and perform the delta...
    Message was edited by:
            BW Star

  • Error Occures while loading data from Source system to Target ODS

    Hi..
    I started loading Records From source system to target ODS.while i running the job i got the following errors.
    Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
    Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
    sp Please help me in these following Errors..
    Thanks in advance,

    Hello
    How r u ?
    I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
    Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Steps to Extract data from Source System

    Hi,
    I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
    Thanks.

    Hi SAPBILearner,
    Genric Extraction Steps:
    1) In R/3 side Create a Data source by use of RSO2 tcode
    Select datasource type here, Give datasource name click create button
    2) Specify description
    Specify your table name
    Choose the Application Component(like SD, MM, PP)
    Click SAVE it takes to next screen
    3) Choose the fields for visible and hidden
    SAVE it.
    Your datasource has been created
    4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
    IN BW SIDE
    1) First Replicate your datasource
    2) Create InfoArea--> Info objects and all
    3) Create InfoSource and assign this R/3 Datasource
    4) Create info package to load data.
    LO EXTRACTION STEPS
    ===================
    1) In R/3 side, First delete the setup table (LBWG)
    2) RSA5 --> transfer datasource
    3) RSA6 --> Verify transferred datasource available or not
    4) LBWE --> Maintain datasource
    5) OLI*BW --> Fill setup table
    6) RSA3 --> Extract checker
    In BW side
    1) Replicate datasorce
    2) Asssign Infosource , activate datasource
    3) Create infopackage to load data
    Thanks
    Mrityunjay

  • Problem in extracting data from source system

    HI
       I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

    Vara Prasad,
    I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
    Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

  • Error while extracting data from a remote system

    Hi,
    I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
    ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
    ORA-00604: error occurred at recursive SQL level 1
    ORA-28000: the account is locked
    ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
    here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
    Thanks

    Hi,
    IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
    we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
    Goto St22 see the short dump error msg..
    post if there any inf..
    Thanks,
    Shreya

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Error while extracting data from Generic datasource

    Hello Gurus,
    I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
    I have done below things:-
    1. Checked the jobs in source system, the job is successfully completed
    2. The generic datasource is active and supporting delta with calender day  in source system.
    3. No TRfc error and no idocs stucked.
    4. No short dumps in source system.
    5. The delta queue(RSA7) is showing 0 with status as green.
    6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
    The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
    Thanks,
    Sonu

    Hello,
    I have used the generic delta using calender day.
    Safety upper limit : - 1
    Safety lowerr limit : - 0
    I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
    Do Generic extraction require any job to transfer data from Database table to delta queue.
    We are not able to get the delta records on BW side. Please suggest.
    Please suggest.
    Thanks,
    Sonu

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Facing Issue while Extracting Data from Essbase using CalcScript

    Hi All,
    we are getting this error while extracting data from Essbase by CalcScript using ODI.
    Does anyone have the answer
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 1, in ?
    com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
         at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
         at org.python.core.PyMethod.__call__(PyMethod.java)
         at org.python.core.PyObject.__call__(PyObject.java)
         at org.python.core.PyInstance.invoke(PyInstance.java)
         at org.python.pycode._pyx5046.f$0(<string>:1)
         at org.python.pycode._pyx5046.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java)
         at org.python.core.PyCode.call(PyCode.java)
         at org.python.core.Py.runCode(Py.java)
         at org.python.core.Py.exec(Py.java)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.h.A(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
         at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
         ... 33 more
    Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
         at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
         at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
         ... 34 more
    com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.h.A(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)

    Hi Now i am getting this error.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 1, in ?
    com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
         at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
         at org.python.core.PyMethod.__call__(PyMethod.java)
         at org.python.core.PyObject.__call__(PyObject.java)
         at org.python.core.PyInstance.invoke(PyInstance.java)
         at org.python.pycode._pyx5054.f$0(<string>:1)
         at org.python.pycode._pyx5054.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java)
         at org.python.core.PyCode.call(PyCode.java)
         at org.python.core.Py.runCode(Py.java)
         at org.python.core.Py.exec(Py.java)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.h.A(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
         at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
         ... 33 more
    Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
         at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
         at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
         at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
         at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
         ... 34 more
    com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.h.A(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)

  • How can I join 3 tables while extracting data from SAP R/3?

    I have 3 tables with the following columns
    Emp table (emp)
      emp_id
      emp_name
      emp_add
    Dept table (dept)
      dept_id
      dept_name
      dept_loc
    Location table (loc)
      loc_id
      loc_name
    Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
    How to join these three tables while extracting data from R/3
      join condition
       loc.loc_id = dept.loc_id
    and dept.dept_id = emp.dept_id
    and loc.loc_id =10
    and emp.emp_id between 2000 and 3000.
    Could any one let me know the procedure to extract this data into BW system.

    Hi,
    shouldn't your join condition be:
    loc.loc_id = dept.DEPT_LOC
    and dept.dept_id = ??
    If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
    Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
    hope this helps...
    Olivier.

  • Time Out Dump while extracting data from table CKIS

    Dear Friends,
    I am getting TIme Out dump for the below code, while extracting data from table CKIS.
    Table CKIS doesn't have any Indexes. Please guide me to resolve this.
    Regards,
    Viji.
    form get_keko_ckis.
      SELECT kalnr kalka kadky tvers bwvar matnr werks kokrs
             FROM keko
             INTO TABLE i_keko1
             FOR ALL ENTRIES IN i_final_modify
                 WHERE matnr = i_final_modify-main_f
                   AND werks = p_werks
                   AND kokrs = p_kokrs
                   AND kadat = p_kadat
                   AND bidat = p_bidat
                   AND bwdat = p_bwdat.
      IF sy-subrc = 0.
        SORT i_keko1 BY kalnr kalka kadky tvers bwvar.
        SELECT kalnr kalka kadky tvers bwvar posnr typps kstar
               matnr menge gpreis
               FROM ckis
               INTO TABLE i_ckis_temp
               FOR ALL ENTRIES IN i_keko1
               WHERE kalnr = i_keko1-kalnr
                 AND kalka = i_keko1-kalka
                 AND kadky = i_keko1-kadky
                 AND tvers = i_keko1-tvers
                 AND bwvar = i_keko1-bwvar.
            IF sy-subrc = 0.
              SORT i_ckis_temp BY kalnr kalka kadky tvers bwvar.
              LOOP AT i_ckis_temp INTO wa_ckis_temp.
                wa_ckis-kalnr  = wa_ckis_temp-kalnr.
                wa_ckis-kadky  = wa_ckis_temp-kadky.
                wa_ckis-posnr  = wa_ckis_temp-posnr.
                wa_ckis-typps  = wa_ckis_temp-typps.
                wa_ckis-kstar  = wa_ckis_temp-kstar.
                wa_ckis-matnr1 = wa_ckis_temp-matnr1.
                wa_ckis-menge  = wa_ckis_temp-menge.
                wa_ckis-gpreis = wa_ckis_temp-gpreis.
              CLEAR wa_keko1.
              READ TABLE i_keko1 INTO wa_keko1
                                 WITH KEY kalnr = wa_ckis_temp-kalnr
                                          kalka = wa_ckis_temp-kalka
                                          kadky = wa_ckis_temp-kadky
                                          tvers = wa_ckis_temp-tvers
                                          bwvar = wa_ckis_temp-bwvar
                                          BINARY SEARCH.
                 IF sy-subrc = 0.
                    wa_ckis-matnr = wa_keko1-matnr.
                    wa_ckis-werks = wa_keko1-werks.
                 ENDIF.
                 APPEND wa_ckis TO i_ckis.
                 CLEAR: wa_ckis_temp, wa_ckis.
              ENDLOOP.
            ENDIF.
        REFRESH: i_keko1, i_ckis_temp.
      ENDIF.
    endform.                    " get_keko_ckis

    Hi Try minimising the conditions in where clause
         SELECT fields..... FROM CKIS
         WHERE KALNR = KEKO-KALNR AND
                      KADKY = KEKO-KADKY AND
                      TVERS = KEKO-TVERS AND
                      TYPPS = 'M'.
        after this, deleting unwanted records from internal table as per pending conditions...
    Regds,
    Anil

  • Error during extraction data from APO system

    HI Gurus,
    We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
    When we checked it is working fine in dev environment.
    Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
    We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
    Could anybody throw some light on this issue.
    Tnx in advance.
    Guru

    Hi,
    Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
    And
    Has replication been done in BI side for the same.
    Rgds
    SVU
    Edited by: svu123 on Sep 24, 2009 7:50 AM

  • BO DI for extracting data from legacy system to SAP BW 7.0

    Hi,
    Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
    Please share your experience on such a landscpae or related documents any of you had come across.
    Regards,
    Pritesh

    There are couple of them - Lawson ERP, Kalido, AS/400.  ECC 5.0 might be there as well.
    Regards,
    Pritesh.
    Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

Maybe you are looking for