Error in Process Chain while loading Master data text?

Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balaji

Hi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto

Similar Messages

Failure of Process Chain while loading master data.

Hi Guys
We are using BI 7.0, we have a chain which loads the data to several master data objects having a Write Optimized DSO in between those.
The steps of the chain is like this when new/delta loads are started loadin first it deletes the all existing WO DSO requestes. starting it was running nice but, now it showing error as follow
"Process Complete Deletion of Data Target Contents, variant Delete Contents of WriteOptimized Text DSO has status Ended with errors (instance DELC_D2YPRHNFKWTJ27DGHR825IG9V)"
for your details pls. look below description what job loag shows.
24.03.2008 23:31:52 Job started
24.03.2008 23:31:52 Step 001 started (program RSPROCESS, variant &0000000025223, user ID ALEREMOTE)
24.03.2008 23:31:54 SQL: 24.03.2008 23:31:54 ALEREMOTE
24.03.2008 23:31:54 TRUNCATE TABLE "/BIC/AZCAGSO0100"
24.03.2008 23:31:57 SQL-END: 24.03.2008 23:31:57 00:00:03
24.03.2008 23:31:58 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:31:59 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:00 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:02 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:03 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:05 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:06 Status transition 8 / 8 to 9 / 9 completed successfully
Hope i can get solutions...
Points are assigned for right ones..
thanks inadvance
peter

Hi Chetan, thanx for your reply. pls. find the exact error below.
1. Error while deleting content of InfoCube/DataStore object
ZDRTSO01
2. Drop Cube Failed In Data Target ZDRTSO01
I am not using ECC, its BI to BI load.
Thanks in advance..
Peter

Process chain for loading master data attributes

Dear Experts,
Can any one explain the steps needed to load master data into info object through process chain.
Thanks in advance
Santhosh
Please search the forum
Edited by: Pravender on Jun 8, 2010 3:06 PM

in bi7 this would be:
start
infopackage
dtp
attribute change run
M.

Error while loading master data text

Hi all,
I have scheduled my first load into Production for a text datasource which still shows as running but when I looked into the Details tab I found the below error:
Transfer (IDocs and TRFC): Errors occured
- Request IDoc : Application document not posted.
I checked the IDoc in R/3 and found that it is with Status 51 - Application Document not posted. The error it is showing there is "Request REQU_XXXX is not available in target system YYYY".
What could be the reason for this? What shall I do to resolve it?
Best Rgds,
James.

Hi,
right click your source system in BW and perform a check. Most likely the connection is not setup properly.
If this check failed
Check RFC destination:
- from BW, SM59, open your source system destination; test connection and from the menu, test authorizations.
- perform the same from your R3 source system with your BW connection.
If RFC are fine most probably the partner profiles and/or the ports are not configured properly.
Let BW perform this task for you: right click your source system and execute a restore. You will require
- administrative rights on the source system
- open the source system client so that bw can delete and recreate the partner and ports profile (SCC4: automatic recording of changes/ changes to rep and cross client allowed)
- ALE/ALEREMOTE or your communication users passwords...
With this follow the steps proposed by the restore procedure. ; when the system prompts to delete the connection, do so. You replicate metadata at the end as well...
hope this helps,
Olivier.

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

Error in Process Chain while loading Master data text?

Similar Messages

Maybe you are looking for