Error in product costing cost component structure with quantity...

Dear sap gurus
I am creating material cost estimation with quantity structure while doing in T CODE CK11N the following error is coming Message no. 213 Cost component structure z9 is not active. But I am not using the particular Cost component structure z9. I am using the standard Cost component structure 01 and I have activated it at OKTZ and the z9 is deactivated. Plz, tell me where I can fix this error
Awaiting for you kind reply.
Naveen

Hai MoH
Thanks for yuor reply, yes you are correct. i have checked in OKKN where i found that the cost component structure z9 is assigned to my co. code that is not mine i am using the standard cost componet structure. plz, tell me where i should go and change the assignment plz, give the T.CODE
regards
Naveen

Similar Messages

Cost Component Structure - expand or further second view

Hello experts,
I have a cost component structure with 40 elements. Now I need 5 further elements, but without changing existent variable / fix components.
One idea is to build a 2nd component structure as "cost component split". But how I implement a second view, what are the steps watching the other structure in customer calculation, or CO PA?
Thanks for help!
Regards Juergen

Oh yes, I forgot about the Limit... You can check for any available OSS notes.,.
As far as I know, the upper cap is 40 and SAP does not allow more.. It makes sense to me that having cost components more than that is difficult to handle
Can you think of revamping your CCS?
br, Ajay M

Error - Material cost estimate with quantity structure

Hello Gurus!
Can anyone please help with the following problem:
Im trying to do the material cost estimate with quantity structure, but the system is throwing back the message " There is no exchange rate for exchange rate type P on 1.01.2008: CHF -> EUR".
This happens because I have a subcontratation in my routing in CHF, and in transaction OB08, and I dont had defined that rate (type P CHF EUR).
I need to know if there is any solution to the system assumes other Type of Exchange Rate (the last real exchange rate that I have introduced in my system, not the planned!)
Points will be assigned to the suitable answer.
Thanks in advance.
Mary Jane

Hi Sridhar
Thanks for your reply.
In OKEQ for the version 0, I have the rate type M.
I don't understand why the system throwing back the message " There is no exchange rate for exchange rate type P on 1.01.2008: CHF -> EUR".!
Do you know why?
Thanks and regards
Mary Jane

Error message: cost elements have no cost component structure

using transaction KSII for the report; we didn´t change any settings, but we get this warming in the system.
We don´t know what happens, because it was ok in december, but know we have this warning.
The version for the year 2009 is maintained.
Any ideas?

There might be some new cost elements which would incurred actual costs which were not available in 2008 as well as in Cost component Structure.
Anyways try maintaining the cost elements in Cost Component structure.

Cost component structure - cost elements for FERT and HALB (TC:OKTZ)?

Hi all,
our cost component structure has the following structure (TC: OKTZ):
1 Raw materials
2 Human ressources
3 Production
4 Material Overhead
5 Production overhead
6 external activity
(this settings are conform with SAP standard - copy from cost comp. structure 01)
To cost comp 1 "raw material" we assigend the relevant (primary) cost elements (consumption raw mat, e,g, steel, wood...).
My question is: In case we insert/post e.g. a semi-finished product to the production order from stock (accor. bill of material), where (in which cost comp.) do I have to assign the relevant cost element? I guess this should be the account "inventory change unfinished product? (maintain in TC: OBYC for transaction BSV according val. class)
Is it correct to assign this cost element to cost comp structure "raw material", because actually it is a semi finished product which is picked up from stock to convert /process further? To problem is, if this cost element is not assigned I get an error in CK11N/CK40N
I hope my wording is not to abstract...
Thanks in advance...
best Regards

Hi..
You don’t need to consider the cost element of production order settlement and production notification.
Cost component structure need the cost element of production order’s debit.

Can it be a seperate cost component structure for each company code?

Company Code No 1 Setting:
Company Code XXXX with Chart of accounts X(Quantity + Value updation in material type)
In the existing company code(XXXX) ,Cost component structure is defined as
All company code---->All Plants----> All Costing Variants -
>Cost component Structure AA
Company Code No 2 Setting:
Scenario:
Now I am creating a new company Code YYYY) which is is allowed for quantity updation alone and trying to create a product cost collector to carry out Production confirmation through Repetetive manufacturing (."Error = Cost object component split costed with Value of Zero"
Can it be possible to have a seperate cost component structure for each company Code?
Company Code YYYY with Chart of accounts Y which is different from Company code 1(Quantity alone in material type)
If possible ,Can anybody provide a procedure to do the configuration of Cost Component structure

Hello,
As I understand your question, All the thing which are releted to costing are done only at the controlling area level not at company code.
As your req diffrent cost componenet for diffrent company code is depend up on how you define the controlling area.
Hope it will clear you
Regards
Ravi

Error in product costing

Dear sap gurus
I am creating material cost estimation with quantity structure while doing in T CODE CK11N the following error is coming Message no. 213 Cost component structure z9 is not active. But I am not using the particular Cost component structure z9. I am using the standard Cost component structure 01 and I have activated it at OKTZ and the z9 is deactivated. I have checked at OKKN the particular Cost component structure is assigned to my company code plz, tell me how can I assign correct Cost component structure to my Co. Code Plz, tell me where should I go and Assign it.
Waiting for you kind reply.
Naveen

HI,
Also check at the CO version also if it has been assigned.
at CO version u have to assign the cost component structure.
With regards
Krishna

Cost component structure in CO-OM Reporting

Hi there,
we want to run cost center reports, that show us the balance on a cost center per primary cost element, after we have allocated some of the costs from the cost center into production orders.
I thought this can be achieved by having the tariffs we use for the internal activity allocation been broken into their cost component structure so that on the cost center, the respective primary cost elements are debited by the activity allocation.
However, this is not happening in my system. While the activity tariffs are correctly calculated with a component split (according the 1SKS-001 report), the standard cost center report still shows the debit on the cost center with the secondary cost element of the activity.
Does this mean I cannot see the component split of my activities in normal OM reporting?
Thanks
Kai

Hi
Make cost splitting structure and assigne to Production Cost Center.
Run Cost splitting KSS2 for cost splitting according to activity types.
bukhari

Cost element is not assigned to cost component structure

Dear Team,
While doing the settlemnt through KO88 system is showing the message like below
Cost element 433001 is not assigned to a cost component in CostCompStruct Z1
     Message no. MLCCS 010
Diagnosis
     You have activated the actual cost component split.
     No cost component has been assigned to cost element 433001 origin group
     in cost component structure Z1 for chart of accounts XXX. The system is
     unable to assign the value to a cost component.
System Response
     You cannot carry out posting.
Procedure
     Check whether for this operation the value to be posted is to be
     assigned to this cost element.
User has done tchnically completed from CO side .But system is showing the open status in FI.
So we have suggested to the user to do settlemt through KO88 system is showing the above message .Half of the production orders we can able to close through Ko88. Some of the PO we are facing the above issue.The concern GL account showing by the system is maintained as a sundry receivables a/c.
Please advice how to proceed further.
Thanks for the consideration.
Regards,
Suma

Dear Sir,
System is showing the GL account is not relating the cost element a/c ,The concern account belongs to Sundry receivables account.
The configuration is done correctly with all expenses GL a/c in OKTZ as well WIP accounts assigned corrctly in OKG8.                How the system is showing this account which i am not understanding.
Please advice to resolve.
Thanks for the consideration.
Regards,
Suma

Material cost estimate with quantity structure (tcode: CK11N)

Hey dear friends.
I donu2019t know in which forum I should put my question above.
In fact, Iu2019m new to SAP PM module.
Iu2019m trying to create material cost estimate with quantity structure (tcode: CK11N) for a material u201CXu201D.
This material is manufactured.
While running the transaction CK11N, I got an error message.
After analyzing this error message, Iu2019ve realised that somebody had assigned wrong activity types to cost centers which are linked to this material in tcode: CR03, tab: costing.
So Iu2019ve changed and assigned the right activity types.
Then, Iu2019ve tried to run the tcode CK11N again. But the system still brings the wrong activity types and seems to ignore the ones that Iu2019ve assignedu2026
It seems like the old activity types still linked to the cost centers somewhere else than in tcode CR03u2026
Any idea about what am I mising ?
Thank's in advance.
Bahia.

Dear Bahia,
If its rate routing means,i guess you must be working in REM scenario.
So goto CA22,delete the existing operation and then assign the same work center in a new
operation,check what activity types is it proposing in the rate routing,if its reflecting correctly means
save the datas.
Also goto KKF6N--->click the change mode icon and then calculator button to create a preliminary cost
estimate and then save the datas.
One of our forum friend has asked you to check the production order read PP master data once
again,but understand there is no production order concept in REM scenario,only planned orders.
Then come back with your queries.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Jun 17, 2009 12:05 PM

Assign the cost component Structure to Plant/Co Code

hi
can u tell how can i assign the COST COMPONENT STRUCTURE TO THE PLANT AND THE CO CODE...
REGARDS

Hi,
This is part of Product costing configuration and done with T-code OKTZ. Here, there is a separate diaglog for Assignment of Org units --> cost component structure.
Here, for a particular co. code and all the plants under this Co. code or for only a certain plants and further to a specific costing variant the assignment is done to the cost component structure effective from certain date.
Good Luck!!!
Thanks and Regards,
Bhuvaneswari.S

Differance betwen Variable & Fixed and Variable in Cost Component Structure

Dear All,
What is the difference between the Variable and Fixed and Variable for the cost component for the Cost Component Structure.
why we have to take Raw Material Cost Componennt always Variable. Is any help?
Regards

fixed cost is irrespective the level of production the cost remains same. or upto certain level of production the cost the cost will ramain same and after the cost may increase.
example: rent of the factory building or office buildings remains same irrespective of the operations level.
variable is with every change in the level of production the cost change.
example: raw material used in manufacturing finished product. The more finished products the more is the consumption of raw material.

Difference between cost component structure and cost component split

can anyone explain me the difference between cost component structure and cost component split with simple example
thanks
santosh

Hi ,
cost component structure
Definition
Number that identifies the structure.
Use
In Product Cost Controlling, the cost component structure determines how the results of material costing are updated. The cost component structure groups the costs for each material according to cost component (such as material costs, internal activities, external activities, and overhead). If the material is used in the production of another material, the cost component split (which breaks down the costs according to material costs, internal activities, external activities, overhead, and so forth) remains in the system when the costs are rolled up.
In the cost component split, you also define the following for material costing:
Which part of the costs are fixed costs
Which costs are
cost of goods manufactured and what are sales and administration costs
Which costs are relevant for stock valuation, commercial inventory valuation and tax inventory valuation
When the cost component structure is assigned to the organizational units, you can specify that two cost component splits are created:
Main cost component split
This is the principal cost component split, meaning that it is used in the standard cost estimate, which can be used to update the material master. The main cost component split can be a cost component split for cost of goods manufactured or a primary cost component split.
Auxiliary cost component split
This can exist in addition to the main cost component split, and is not used in the standard cost estimate. It can be used for analysis purposes, in that it can be displayed with the cost estimate and passed on to Profitability Analysis.
In Cost Center Accounting, the cost component structure determines how the results of the activity price calculation are updated. The cost component structure groups the costs for each activity type of the cost center according to components (such as material costs and labor costs). If an internal activity allocation is carried out, the cost component split (which breaks down the costs according to material, labor costs, and so forth) is retained at cost rollup.
If the cost component split is not to be retained, you can create a switching structure for the cost component structure for Cost Center Accounting. In the switching structure, you specify which sender cost component goes into which receiver cost component.
<b>require a cost component structure to calculate prices using cost component split.</b>
For each cost component structure you define a component such as energy, personnel, or raw materials. The components combine all costs occuring for a particular cost element area. In this way, you ensure greater cost transparency in activity price calculation when putting together the activity type prices - for example, it becomes easier to find how much of the activity price is taken up by the material costs.
In activity allocation, the cost component structure remains constant, meaning that the receiver takes on the sender cost elements and that the allocated costs are posted in the same cost components in the receiver as in the sender.
A cost component structure can have a maximum of 40 defined cost components.
Cost components are assigned to cost elements. You thereby determine which cost elements go to which rows in the structure, and how these components are updated in price calculation.
Hope ths helps
Please rewad points
Sunil

Error while adding the issue for production (item cost not found)

Hi all,
The scenario is,
when the user is trying to add the issue for production system is showing error item cost not
found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
not occur.
Since the valuation method is FIFO.Item cost error should not occur.
The error related to item cost must not occur at the time of issue for production.
Regards-
Mona.

Hi!
Please check these threads
Sales Delivery Document
Item Cost Error
No item cost was found

New Cost Component Structure in new Costing Variant

Hi gurus,
i created a new costing variant (to be used for planned prices, for budget purposes), then a new cost component structure.
Now the system (transaction OKTZ) doesn't allow me to assign the new cost component structure to the new costing variant forcing me to mask the costing variant with ++++.
But the aim, for me, is just assigning the new cost component structure to the new costing variant only for a company code and only for a plant.
Does anybody know how i can reach the goal? Am i missing some step?
Thanks in advance for the collaboration,
Best regards
Enrico

Hi Utenza
You can very well achieve this
1. First of all ensure that a masked entry exists i.e. ++++ in Comp Code field, Plant Field, Costing variant Field and assign the Prmary cost comp str here
2. Then, coming to the new costing variant and new cost comp str,
a. Enter ++++ in the comp code field
b. Enter your plant name in the Plant Field (and not ++++)
c. Enter your new costing variant here.. (This should be the costing variant where costing type is not 01)
d. Assign your new cost comp structure here against this costing variant
Regards
Ajay M

Error in product costing cost component structure with quantity...

Similar Messages

Maybe you are looking for