Error in Product group creation

HI,
When I am creating product group at that time i m getting error like "Required parameters missing when calling up module"
Can anybody tell me solution..?
Product grp i m creating for SOP.

Dear Chetan,
Create a material using T code MM01,using the material type as PROD and then assign a plan for this product group in MC81.
Check this link,
Product group error
Regards
Mangalraj.S
Edited by: Mangalraj.S on Aug 20, 2009 3:18 PM

Similar Messages

ERROR WHILE PRODUCT GROUP CREATION

Dear All,
I am trying to creat the product Group but system is giving the
following error.
Message No.M3749
"Required parameters missing when calling up module".
Please give your valuable input to overcome the issue.
Thanks & Regards,
Vijay Mankar
+91 9871251289

Dear Ramanujan,
I have create Product Group lots of time without crate a material with PROD material type in IDES,and also I have checked it on other client DEV server its creating properly,and one thing ,if I entered Product Group & did not saved and again try to create it again ,it gives error that the Product group is already exists. Why it is happened?
But why it is not allowing me to create at my end.
Please give your valuable inputs for the same.
Vijay Mankar

Product group creation error

Hi Guys,
While creating product group i am getting the following error can any one help me out to resolve the same
The error
Required parameters missing when calling up module
Message no. M3749
Thanks and regards
Thamizhchelvan G

Dear Thamizhchelvan,
I think you must be working in ECC 5.0 or ECC 6.0 version.
If so means first create a material say test using material type PROD - Product group in T Code MM01
and then assign the members in MC85/MC86 for the product group.
check this link
product group
This will solve your problem.
Regards
Mangalraj.S

Regarding Product group Creation

Dear SAP Guru
I am facing issues while creating Product group by the code MC*$.The error is "The field is defined as a required field; it does not contain an entry
Message no. MG144 ".Also while cretaing through the material tyoe prod, i am facing error of getting the Profit center
Regards
Edited by: Bhupendrasingh on Mar 7, 2012 9:19 AM
Edited by: Bhupendrasingh on Mar 7, 2012 9:27 AM

Hi Bhupendra,
Please see the below link, may be it help you out.
Getting Error Message on the MC84 transaction code MG144
PRODUCT GROUP
Thanks,
Mohit

Automatic Product Group Creation.

I'm wondering if I can create Product Groups automatically. My problem is that I have 110 Product groups in Excel and they are assigned to 2500 materials. Now I want to move to have those product groups in SAP. Creating "PROD" material and then assigning them in MC86 is painfull.
Is it possible to do it with LSMW or someting like that? If yes please provide step by step tutorial.
Thanks

sure it is possible with LSMW, is there anything that cannot be loaded with LSMW?
LSMW is well documented:
http://help.sap.com/saphelp_nw70/helpdata/en/4d/455035082e2271e10000009b38f889/frameset.htm

Error during Production Order creation

Hi All,
Our's is MTO scenario. We have maintiain Account Assigment Category as 'M' in Requirement Type. During creation on production order with ref to sales order system gives error "Account assignment cannot be carried out because of different origin no."
If I create the production order with ref to quotation system does not gives any error. But my requirement is to create the prod order with ref to sales order.
Please guide
Regardsd

Hi Bala,
In SPRO goto>Sales and Distribution> Basic Functions-->
Availability Check and Transfer of Requirements
-->
         Transfer of Requirements
-->
             Define Requirements Classes
             Define Requirements Types
-->      Determination Of Requirement Types Using Transaction
Determination Of Requirement Types Using Transaction
In the standard system, requirements types are determined according to a specific search strategy beginning with the material strategy group.
Strategy for Determining the Requirements Type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Note
You can select an alternative search strategy in the 'Source' field, for example a transaction-related procedure for determining requirements type (source = 1 or 2).
Example
There are business transactions, such as consignment stock processing, in which the material with its planning characteristics is not important, rather the transaction itself. An issue from the customer's consignment stock should not trigger an availability check against planning at the plant as layed down by the planning strategy but rather against special stock.
Actions
1. Assign the item categories and MRP type to the requirements types.
2. Select an alternative search strategy in the 'Source' field if necessary.
By assigning the 1 or 2 to the Source you can have the requirements in MD04 refered to order instead of the initial source document which is usually quotation. If we don't assign this then the system by default refers to the initail document created i.e. Inquiry or Quotation whichever is the first document.
Regards,
Karthik.

Error in Production Order creation : No Production Storage Bin could be fou

Hi Experts,
I am creating Production Order for a Warehouse Managed Material. On saving the Material, it is resulting in an error saying " No production storage bin could be found (8005 RX1 000000000001802347)u201D
Message No : LP 093.
I guess some master data is missing. Please give some inputs on closing this.
Thank you,
Regards,
Ramakrishna

Hi Jurgen,
As such no Control cycle is exsing for this combination. We are in an Upgrade Project from ECC 5.0 to 6.0 . I am wondering, how this is working in ECC 5.0 with out control cycle as well. Will there be any other possibility
Thank you,
Regards,
Ramakrishna

Error in Master Group creation

Hi Mahantesh Here,
In Master Data while creating Company code data & account Management tab page in that Reconcilation account option i m not getting what to enter there. Its not accepting any value there like 140000, Pls help me.

hi
check whether you have assigned the chart of account to your company code
In OB62 assign the chart of accounts to copmpany code
IMG-FInancial Accounting-general ledger accounting--g l accountsmaster records--preparations -
assign company code to chart of accounts
regards
Prashanth

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

Creation of product group

hi
i am creating product group using transaction code mc84
while creating product group it gives error as "The field is defined as a required field; it does not contain an entry"
I have entered
Product group   PP_TEST             PP test
Plant           1001
Base Unit       KG
selected materials as members
will anyone tell me where i m going wrong?
Prashant

Hi,
You might have marked some field as mandatory . And as in product group creation we have limited view so that error might be occuring .
Check what field you have marked as mandatory in t code OMS9 and OMSR
Regards,
Vishal

Error while creating Product Group in SOP

HI Gurus,
When I am trying to create the product group in SOP in MC84 , I get follwoing error.
"Product group cannot be created (batch input error 7) Message no. MA218"
how to slove this?
Thanks in advance.
RG

Rajiv,
Basically if there are mismatch in the Field selection and fields visible in MC84 you would get this error.
The workaround suggested by SAP is to create a product group using MM01 with material type PROD, latter on using the change product group transaction MC86 you can assign its members.
Regards,
Prasobh

Error during Creation of Product Group

Hi experts
I am getting below error during creation of Product Group MC84,
how to solve this
The field is defined as a required field; it does not contain an entry
Message no. MG144
Procedure
Transfer a suitable value.
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
Note
For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

Hi,
Please refer the below thread,
PRODUCT GROUP
Regards,
Senthilkumar

Error while creating product group

hi,
i am getting error while creating Product group.
Required parameters missing when calling up module
Message no. M3749
Please suggest me.. how to cop this
Regards,
amit

Dear Brahmankar,
I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
Please suggest me , this process is correct or it will create any problem in any module .
Thanks & Regards
Prabhakar

Error While creating a Product Group

Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.

Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram

Error while creating the product group by MC84

Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.

Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar

Error in Product group creation

Similar Messages

Maybe you are looking for