Error in product registration process, what can I do?

Hi,
after purchasing a Mac pro in a third party reatil store (Germany), I tried to register the product on my support page. But after entering the serial number, all i got was the message "Leider scheint das Kaufdatum für die eingegebene Seriennummer nicht korrekt zu sein" (transl: "Unfortunatley the purchasing date seems not to be correct in relation to the serial number"). And so I got stuck there ...
Why will this message occurr?
What may I do to register my Mac pro?
Thx!

I would first contact the the retail store.
Are they an Apple Authorized Reseller?
Next cjtact Apple Support
Contact Apple for support and service
Make sure you select Germany as the country

Similar Messages

I'm stock in restore process:( what can i do? using ipod 5thgen nano

i'm stock in restore process:( what can i do? using ipod 5thgen nano

Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

HT1657 It keeps showing error in downloading rented movie what can i do?

It keeps showing error in downloading rented movie what can i do?

Are you getting an error message number with your error? If so, what is the number?

I'm trying to restore my iphone and it has a error 1601 when its finished. what can i do?

I'm trying to restore my iphone and it has a error 1601 when its finished. what can i do?

Covered here:
http://support.apple.com/kb/TS3694

Error U43M1D204 by updating PS What can I do?

error U43M1D204 by updating PS What can I do?

Contact support.
http://www.apple.com/support/itunes/contact.html?form=account&topic=iTunes%20Sto re%20Account%20and%20Billing&subtopic=Billing%20Inquiries

The installed file can not be activated. Since the system does not perform the registration. What can I do?

The installed file can not be activated.
Since the system does not perform the registration.
What can I do?

I have the same issue. When trying to open the acrobat XI Pro for the first time, you are obligated to sign in with your account. But signing in is taking about an hakf hour now, while I have no problems signin in trough adobe.com with the same username and password.

Error itunes store -45054? what can i do?

error itunes store -45054? what can i do?

help suppose to redirect you to apple knowledge base and "something" blocks you secure connection as well as connection to apple server over your browser window. Two things usually do stuff like that. Security on your computer. Or very good network firewall. I find security on your computer more likely, since when you press help browser is not even opening for you.

HT1926 Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update. Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
Windows 8.1 is becoming less and less aware and tolerant of them. That's not right!
With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors. The update brought the errors.
Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
What can be done to make the backup process smoother and eliminate these warnings and errors?
Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
As usual, clicking the Event Log Online Help button yields: "We're sorry, but the page you requested could not be found. You can search on TechNet for more information." Microsoft, you know that needs to be fixed too, right?
The specific command I'm using, via the Task Scheduler, is:
wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors. But it would
be nice to not have them.
And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

The errors suddenly stopped on their own, but the warnings continue.
As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update. I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
the volume numbers started over again at a lower number).
As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
2:00:00 (Information) - Virtual Disk Service - Service started.
2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy. No action is needed.
2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy. No action is needed.
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
2:30:00 (Information) - Virtual Disk Service - Service stopped.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Can't render: after effects error: internal verification failure. What can I do?

I need to render a comp (h.264 default settings) and the process is stopped with the following error: "after effects error: internal verification failure, sorry! {could not find itemframe we just now checked in}".
What can I do? I have already tryed to re-start Ae several times. The render stops at random points, when started again. The comp is very simple: a mp4 movie background, still PNG pictures one after another with opacity and 1 mask keyframed and write-on texts at their side, explaining the pictures. Thank you in advance for any help.

User52142 wrote:
Yes, the problem is that Ae seems to not handle well MP4 files. Why is that?
After Effects works on a pixel-by-pixel basis. After Effects is not like video editing programs - they just deal with a video stream - in After Effects, each frame is fully uncompressed.
MP4's use interframe compression. That means that they only have a complete frame every once in a while and the rest are filled in using a variety of methods including motion estimation. Depending on the compression settings, a video with interframe compression often won't have a complete frame for a few seconds. That means that, out of every 90 frames or so, only one of those frames actually contains full pixel data for the entire frame (and that frame is usually somewhat compressed using intraframe compression [like a JPEG]). After Effects has to decode a lot of crap and translate it into full-frame, full pixel information before it can even begin to process it.
After Effects is much better with it now than it used to be. CS4 and earlier used to struggle with it bad. Each version since has improved handling of such things. Also, each version implements ways of handling newer versions of codecs. Keep in mind, version 11 (CS6) was written before a lot of modern cameras were even built. The current version (13.2) probably would not have had the issue you did.
Does that explain it?

Error in executing the program,what can be the error

Error in executing the program.
What can be the error ,if the error shown is PROGRAM ABC DOE! after entering the values in selection screen?

Hi,
Use find to search globally for message in the program.
Check the message that is handled in the program in the selection screen validations.Double click and find out the message.Then you can easily trace why it's happening.

If I connect my iPhone/iPad iTunes 11.0.1 freezes, without error message.... what can I do?

When i open iTunes 11.0.1 everything is fine, but when i connect any iDevice to it it completely freezes, without so much as a warning or an error message. I tried different cables, devices and reset and restarted everything. Anyone else experiencing this, and what can i do?
The only option is to force quit the application and there seems to be no simple solution...

iTunes runs on your computer, not your phone. Install the latest version of iTunes on your computer. If you're using a Mac, and running OS X 10.5, you will need to upgrade OS X first.

I have error 29in my iPhone 4S what can I do please

I cant restore my iPhone 4 s because error 29 what can I do please

http://lmgtfy.com/?q=iPhone+error+code+29

Iphone Registration Problem (what can I do now?)

Hello everyone,
I just recently bought my new Iphone, and well I immediately wanted to registrate it to be able to download aps and stuff:
When i was about to registrate the iphone, i needed to create a new online click&buy account for the paying thing. Therefore i had to cancel the iphone registration.
Now i completet my click&buy account, so i went back to itunes to continue with the iphone registration, but i cant find any button or something that tells me how to open the registration window...
what can i do now?
- regards

Hello everyone,
I just recently bought my new Iphone, and well I immediately wanted to registrate it to be able to download aps and stuff:
When i was about to registrate the iphone, i needed to create a new online click&buy account for the paying thing. Therefore i had to cancel the iphone registration.
Now i completet my click&buy account, so i went back to itunes to continue with the iphone registration, but i cant find any button or something that tells me how to open the registration window...
what can i do now?
- regards

Error in product registration process, what can I do?

Similar Messages

Maybe you are looking for