Error in Protocol for Generation of Integration Scenario Configuration

Hi,
If I try to generate my Integration Scenario in simulation or real mode I get the follwoing error allways in the "Generation Statistics" section (last entry):
<b>
Error when creating or changing configuration objects 0</b>
If I save it and check it - no errors could be found. Any ideas?
Regards,
Christian

Hi Christian,
you working with SAP software
> Error when creating or changing configuration objects 0
means:
zero errors...
Regards,
Udo

Similar Messages

Error in SXMB_MONI for HTML to Webservice Scenario

Hi Experts,
I am facing following error Error in SXMB_MONI for HTML to Webservice Scenario
"Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EmailRequest_To_ValidateEmail_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog."
Only one field is used i.e. email address and mapped properly in IR but still the error is persisting, Please suggest some way out.
Regards,
Nitin

Hi,
Mapping internall follows the SAX parser. Please check if you are trying to process the data of large size.
generally while parsing the large data this exception get raised. Even though there is just one field, what is the data size you are trying to pass.
Thanks
Swarup

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Threshold for Messages in integration scenario?

Hi,
Can we set threshold (time) for Messages in integration scenario?
Thanks,
Nagarjuna.

Hi Earlence,
> 1. Is it possible to search for messages sent to PI (7.1) via TREX and monitor their status?
Status I am not aware, but we can search the messages based on the content.
Its external search engine for SAP, we can buy this and install in the XI server.
ex : Suppose we have an order number, we don't no in which scenario it is used then we give
this number to the TREX then it searches and gives that scenarion name.
> 2. Search should be possible based on various criteria like Sender/Receiver Component/Interface, Business system name etc.
TREX is based on a client/server architecture. The client component is integrated into the application that uses the TREX functions, and allows communication with the TREX servers.The server component processes the requests; it indexes and classifies documents and answers search queries.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6
be60cc5cfd
> 3. Is there a Java API so that this can be done programmatically?
May be available but this is not easy.
> 4. Some resources for the same?
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
http://help.sap.com/saphelp_nw04/helpdata/en/70/0837ced133304eba452c45b6047c74/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6be60cc5cfd
Regards
Ramesh

Integration Scenario Configurator

Hello!
I want to generate the receiver determination for an integration process on XI 3.0 SP10 with the Integration Scenario Configurator.
I have created an Integration Scenario in the Integration Repository, there are no errors when checking with F7.
If I open it in the Integration Directory and go to Integration Scenario Configurator -> Check Configurability I get the following error message:
"Component View /Role <my Integration Process>: Only connections with interfaces that belong to the integration process interface are permitted"
What does the error message mean? What do I need to change to eliminate this error message?
The connections point to interfaces I have defined in the same software component as the integration scenario and process. For the integration process I have created abstract interfaces.
Regards, Tanja

Hi Simon!
I was able to solve this problem some weeks ago but thanks for your hint anyway.
As you have mentioned the problem was that in the Integration Repository the integration scenario was not consistent with the used integration process as it contained a wrong interface.
After I have corrected the integration process in the Integration Repository and updated the changes in the Integration Directory the generation with the Integration Scenario Configurator worked without any problems and the status of the process changed to 0 in SXI_CACHE.
Regards, Tanja

Error: Select directory for export- ERP integrator

Hi,
I try to export member mappings from ERP integrator 11.1.2.1.501. It Showing the error, "Error: Select directory for export".
Which directory should be selected here.
Pls anyone give me a solution to solve this issue.
Thanks
Edited by: 3088 on Jun 19, 2012 9:33 PM

You can choose a directory local to the ERPi server in the environment.

Doubt in Integration Scenario Configurator- Not able to assing sender chane

Hi All,
i have imported the integration scenario to the Directory.
Assigned the relevant business services to both Sender and Receiver.
I am able to assign a Receiver Communication Channel.
But for sender system communication system , it shows 'Not Required'. i am not able to do anything. Sender is a Third Party System. I have created a sender JMS channel under it.
could someone suggest what is to be done?

If you configured your sender BS and CC correctly it must show..
one try go and create a dummy sender agrement for the same interface check it is allowing there ,,if yes then u doing something wrong in configuaration scenarion.

Error in AE for File to File scenario

Hello,
i created a scenario for file to file. My file is picking up, but when i see sxmb_moni, i am seeing below error. Is there anything to configure for AE.
<b>no_messaging_url_found: Unable to find URL for Adapter Engine</b>
Please advice,
Srinivas

Hi,
Under SLD check if you have maintained Pipeline URL for XI Bsuiness system. Under tab "Integration" you will find parameter "Pipeline URL" and shd have value something like "http://dev server:port /sap/xi/engine?type=entry...
If this entry is correct then try to refresh Adapter Cache using TC : SXI_CACHE..
MenuGoto>Adapter Engine cache ( Click on refresh button)..
Hope this will help.
Nilesh

Error in TRFC for IDoc to File scenario while sending IDoc

Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj Kumar

Hi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj

Getting Error IN sxmb_moni   for FILE TO FILE SCENARIO

Hi ,
    I did File to file scenario by using Content conversion ..(that is from .TXT format to .XML format) for a single record it was working fine.. if i put 0: Unbounded in my source structure means i'm getting this following error ..
my source structure is like this :
SENDOR_DT
     STUDENT
          DETAILS
                NAME
                NO
                ADRESS
                BRANCH
SO, I PUT   Details as 0: Unbounded.. if i did't put as unbounded means it's working fine for a single record.. but if i put Unbounded means immediately i'm getting the following error ...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_TRNG_TEST_1_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_TRNG_TEST_1_MM_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
plz provide me the solution..
Thanks
Babu

Hi Babu
please check whether the occurence of the target structure in multiple times or not. if it is 1..1 then change it to 0..unbounded.
case2: take the payload from the sxmb_moni and put tha payload in the message mapping you will come to know where is the error.
if still have the problem please reply back
Thanks
Rinku
Hi babu
check whether the occurence for the target node is 0..unbounded.
Thanks
Rinku
Message was edited by:
        Rinku Gangwani

XI Error - Integration Scenario Configurator

When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error:
An assignment to a business service must be defined for each business system service. Unassigned business system services exist. These can be removed automatically.
Has anyone seen this and please detail to me what you did to resolve it? We are trying to implement E-Recruiting in this particular scenario.
Thank you!
John

Hi John,
First of all are you doing B2BScenerio,If not in A2A scnerio we can not use Bussiness service.Only Bussiness systems has to be used and you can only assign Bussiness system.
**Reward if helpfull**

Error in SXMB_MONI for Idoc to File Scenario (missing of field plant

Hi SapAll.
here i have got a tricky situation where in a Idoc(Matmas.Matmas05) to file Interface thorugh XI there is an error message raising in sxmb_moni.
to get the conclusion for this error i just copied the message from Sxmb_moni and tried with Message mapping in Design by just pasting there,after all this process iam getting the error message as below
Cannot produce target element /MT_FCI_MATERIAL/fcidataimport/objects/object/extensions/collection[3]/row/fields/PLANTEXT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
When i go the mapping program it is defined as
if Matmas.matmas05WERKS(sender) exists then map werks to plant tex(reciver MType)t else map constant with(null value) to reciever(MType).
and the important thing is the here the occurance of field plant text is 1.1.
so iam not sure on why the error was raised in message mapping as every thing is fine.
can any body help in slolving this.
regards.
Varma

if Matmas.matmas05WERKS(sender) exists then map werks to plant tex(reciver MType)t else map constant with(null value) to reciever(MType).
When WERKS's is absent the IF doesn't have a value and hence the whole context gets suppressed which returns the error. What you have configured would work fine if WERKS is there but with no value. Here the case is a bit different. WERKS itself is not coming. Your logic doesn't handle that. Hope you got what I intend to convey.
Correct me if I am wrong but the logic is you need to pass WERKS value to PLANTTEXT if value comes else map a blank constant...right??
If so, why not just use mapWithDefault
WERKS -> mapWithDefault(blank contant) -> PLANTTEXT
This way if WERKS comes teh value would be passed, if comes with blank value blank value would eb passed if doesn't come atall, even then a blank value would be passed.
Regards
Soumen...

Use Webservice instead of RFC for HR-FI Integration Scenario

Hello
there is an ALE Scenario to integrate HR and a FInance System on different servers.
This works nicely with direct RFC Calls/Connections or even with PI and RFC Adapter.
we want to use PI and Enterprise-Services/Webservices/Proxies instead of RFC (for strategic reasons), but i could not find any Standard Scenarios for this, as far as i see the name of the RFC-Functions is quite hardcoded into SAP HR.
any ideas how to do so withouth creating to much modifications in sap standard?
thanks
joerg

This is a community for users of SAP Business ByDesign. Is your question related to Business ByDesign?

Confusion with PI 7.1 with integration scenario

Hi, expert,
I read a lot of documents before I have physically logged on to PI 7.1, I thought I had a very good idea about the new version. However when I am physically in PI 7.1, I found I get a little confused.
I know ES is a big thing in 7.1, but I will be working on integration (integration scenario), I thought this part is not changed from 7.0 to 7.1. Basically in 7.0, you defined message type and message interface, message mapping and interface mapping, then you go to ID to configure the integration scenario. However in 7.1, you do not have message interface anymore, instead, we have service interface under which you define operations, which is fine from ES perspective. But if I am only interested in integration, what I need is like PI 7.0: outbound interface, mapping, inbound interface, NOT the operation. Now how can I define 7.0 message interface in PI 7.1? (I know operation mapping is 7.0 interface mapping).
Can I make following understanding?
1) Operation in 7.1 is like messag interface in 7.0
2) Service Interface is a tool to group multiple related operations under one roof.
3) To define integration scenario, I do NOT need the modeling. Modeling is only relevant to model ES, NOT for integration scenario.
So if I am only interested in integration scenario, what is changed from PI 7.0 to PI 7.1?
Thanks for advice
Jayson

> Can I make following understanding?
> 1) Operation in 7.1 is like messag interface in 7.0
Service Interface with one operation whose name is same as the service interface and Xi 3.0 compatible type is same as 7.0 Message Interface
> 2) Service Interface is a tool to group multiple related operations under one roof.
Yes.
> 3) To define integration scenario, I do NOT need the modeling. Modeling is only relevant to model ES, NOT for integration scenario.
Yes.
>
> So if I am only interested in integration scenario, what is changed from PI 7.0 to PI 7.1?
I did not work much on this area but, as long as you are replacing the interface mapping with operation mapping things must be pretty much same here. For your information, Integration scenario is not a compulsion unless u want to represent the scneario graphically and create the ID objects automatically.
You can create the ID objects manually whitout creating an integration scenario on ESR.
VJ

Integration Process in Integration Scenario

Hi All,
I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
regards,
Biranchi

Hi
Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

Error in Protocol for Generation of Integration Scenario Configuration

Similar Messages

Maybe you are looking for