Error in Proxy activation
Hello experts,
I am trying to create a new proxy. However I am getting an error while activation. I selected service interface and creating a proxy. During the activation an error reads as follows:
path not active in ICF /SAP/BC/SRT/XIP/SAP/Z********* (at the end it is the name of the service interface).
I tried to go in SICF transaction with all above levels. The above path has not even been created.
I am not sure how I can resolve the issue. Any help!
Thanks,
Ganesh Khumse
Node had to be activated till /SAP/BC/SRT/XIP/SAP.
Issue resolved.
Thanks
Similar Messages
-
Proxy Activity terminated because errors occurred during package checks
Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
GouthamHi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana -
Proxy Activation - ECC 6.0 to SAP PI system
Hi All,
Our envirnonment -
1) SAP ECC 6.0 ( R/3 system)
2) SAP PI ( R/3 system)
To establish communicate between SAP ECC 6.0 to SAP PI ( R/3 system using proxies )-
we have setup following steps on ECC 6.0 system-
1) Created a HTTP connection in the business system of type H.
Please let me know what is the path prefix we need to set.
2) Configuration Business system as local Integration Engine.
3) Connection between Business System and System Landscape Directory
Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
I have developed a sample interface to send data from SAP ECC --->PI --> File system ( Proxy to file interface)
When i run the report to call the proxy it is pushing the data on the integration engine of the ECC system.
How can i debug what is the problem is ? why the data is not getting pushed on PI system using proxy ?
How can i debug this ? Please let me know if i am missing any thing in proxy activation between ECC to PI system.
Regards,
KishoreHi ,
I have cross checked the activation steps.
I am able to create a interface proxy to File
SAP ECC R/3 system --- > SAP PI ---> File system
I have created a proxy on ECC R/3 system using SPROXY. when i trigger the proxy using a abap report the data is not getting pushed on to SAP PI system .
When i do a SXMB_MONI on ECC system it should call the integration server as out bound ... It is throwing a error message as mentioned below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Integration Server
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">ITEM_MISSING</SAP:Code>
<SAP:P1>Envelope</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please let me know how to proceed .
Cheers,
Nanda -
iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
Messages "An error occurred while activating. Try again later"
Hi
have an iMac (2,5 GHz Intel Core i5, 4GB 1333 MHz DDR3 latest OS 10.9.4) and I keep getting errors while logging in to messages
- I can send and receive imessages on my iPhone and iPad with no problems
- my apple ID is verified
- I don't have modified the "hosts" file
- My time is set on "automaticly set time and date"
- When mountain lion came out, I had no problem what so ever
- I erased my HDD and did a clean instal. The first thing I did was start imessage and log in.. same error
- I tried another apple ID (from my mom) and that didn't word either
- I changed my password and tried again
- I searched the ports and opened them on my router
- I reseted my icloud keychain
- I searched on the internet and tried everything I could find.
Can anyone help me? There was a time that I could use messages with no problem at all, but like a year ago, I kept getting this error.
Thank you kindly
translated from dutch to english: "An error occurred while activating. Try again later"This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reinstall OS X.
Step 14
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth -
How do i sign in onto facetime if it keeps on sayin 'an error occured during activation'.?
iOS: Troubleshooting FaceTime
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Using FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues -
got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
RajHi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS. -
I am trying to call sharepoint online from powershell. Below is the code. I get
Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required."
$loadInfo1 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
$loadInfo2 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
$webUrl = "ZZZZ"
$username = "XXX"
$password = "YYYY"
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
$ctx.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$web = $ctx.Web
$lists = $web.Lists
$ctx.Load($lists)
$ctx.ExecuteQuery()
$lists| select -Property Title
Raj-ShptHi,
About how to access SharePoint online site using PowerShell, the blog below would be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/29518.csom-sharepoint-powershell-reference-and-example-codes.aspx
Another two demos for your reference:
http://www.hartsteve.com/2013/06/sharepoint-online-powershell/
http://www.sharepointnutsandbolts.com/2013/12/Using-CSOM-in-PowerShell-scripts-with-Office365.html
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
Error message while activating MPOS
Dear All,
We are implementing SCM 2007 and are facing a peculiar problem, please help me to resolve the issue;
We have copied all the necessary standard objec from BI content and also created some of the Zinfoobjects. We have created MPOS with Z objects and other MPOS as well with 9AMATNR and 9ALOCNO.System allows us to save the MPOS but when we activate it gives an error message.
Please help me in resolving the issue.
Best Regards
JavedHi
Thanks for your reply .
I have already done as you have mentioned.
There is a problem of log generation too. system does not show the message text
when I try to activate the MPOS , ignoring the same systems populate another message as below; please see below;
Error occured during activation (see log).
Best regards
Javed -
Error message while activating ODS ZFI_ORD( FI Order Details)
hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
PoojaHi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear -
Error authenticating proxy while running agent job
I am trying to schedule a SSIS2014 package via SQL Server Agent job. Both SSIS and SSMS are running on my local machine in the same domain. I am running SSMS with the same user
Domain\Admin which is the creator of the SSIS package. SSMS 32-Bit and SSIS 32-Bit are running on Windows 7 64-Bit machine. I can run the package within SSIS without problems.
When I use a proxy account to run the job step, the following message occurs:
Unable to start execution of step 1 (reason: Error authenticating proxy `Domain\Admin`, system error: Logon failure: unknown user name or bad password.). The step failed.
The proxy account uses the credentials identity Domain\Admin. Since the password fields for credential properties in SSMS cannot be left blank, I typed any password although my corresponding windows account has no password. So as mentioned above
it's the same user account that created the SSIS package since Domain\Admin is stated in the CreatorName property of the SSIS package.
With this proxy, I tried to run SSIS jobs using the package ProtectionLevel's
EncryptSensitiveWithUserKey and EncryptSensitiveWithPassword. Running the package manually within SSDT without problems, but from SSMS agent job the same error message appears. I tried the package sources "File System" and, after
importing the package to MSDB, "SQL Server" and "SSIS Package Store". But exactly the same error message appears with each method.
Task manager shows that SSMS is running in administrator mode. Using Windows Component Services I added DCOM permissions for
Domain\Admin to start and activate "Microsoft SQL Server Integration Services 12.0" from local. But the same error message appears. So in my opinion it's a problem with SSMS user account permissions (???) but unfortunately I don't know
what exactly to do here. I tried the following:
In the system database MSDB (full path: Databases / System Databases / MSDB / Security / Logins) I assigned all available role memberships (Including db_ssisoperator, db_ssisltduser, db_ssisadmin) to
Domain\Admin.
In server security (full path: Security / Logins) I assigned all available server roles. In the tab User Mapping, I assigned the MSDB database.
Still the same error message appears when I try to run the job. Does anybody have some ideas what I can try?If you use the Agent then set the package protection to "Rely on server".
Then Domain/Admin is probably not an actual proxy but the account the Agent is running under, in this or even any case follow http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/ to create the
proper proxy for the packages.
Arthur My Blog -
Error message when activation a packaging specification in ICH 5.0
Dear all,
I created a packaging spec within ICH 5.0. The check function does not return a error. But when trying to activate the PS I am getting the error message:
Package specification not activated; no condition records found.
What kind of condition records does the system mean?
Regards
MartinHi Martin,
You can have a look in the pack spec group and make sure that the flag 'PS_ACTIVATE' it is not set.
That way you will no longer face this error during the activation process.
I hope this will help you. -
Activation error: Printer not activated, error code 20
I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
ReyWhat operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
Group txt no longer works on iphone 4s
I have just got my iPhone 4s, all looking great until I went to use a group txt app. I run a football team and used the group txt app (37 recipients) on the iPhone 4 all the time, tried to send group txt yesterday and it came up as an imessage and on
-
Firewall Blocking Website without manual input
Our firewall appears to be blocking a website without us setting it to block it. We only have basic threat detection enabled, but it seems the firewall did this on it's own, and we cannot find where to unblock the website. Anyone have any tips for ne
-
Bootcamp or Virtual software for Windows 7 ?
Hello all, For a number of years I have used either Parallels, and the last few years --- Sun Virtual Machine to run W2K Professional and XP Professional on my Mac Core2Duo with 3 GB memory -- all has worked great. Now -- I want to get some experienc
-
Can't get Thumb tab on the sidebar to show up
Hi and Seasons Greetings, I use Defense Connect Online (DCO), so this may be a function of a downstream application. I am presenting larger and larger presentations and need a way to jump back and forth on slides quickly. The outline view doesn't sho
-
I was doing fine getting email on my powerbook and my iphone. Then I got a interesting problem. I deleted old emails, and surprise. I have a message I can't get too, and when I check mail, i get a "you'v got mail buzz" but i can't read the one messag