Error in Proxy connection

Hi Experts,
I m trying to make connection between XI and SNC for Proxy.
I have followed all the steps according to : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
even i have checked all the settings so many times.
But still if i will run SLDCHECK on SNC side then its giving me below error:
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
where as SLDCHECK in XI is working fine.
I am using Client 001 for XI.
XI version : 7.1 and SNC 7.0
Can any1 help me in this?
Thanks in advance.
Hetal

Hi Hetal,
Check for the Business system in SLD for SNC, and also if the client is correct or not. Execute the function LCR_LIST_BUSINESS_SYSTEMS in the Tcode SE37 and check if the business system listed there for SNC.
Cheers
Hemant

Similar Messages

Cannot establish proxy connection: 502 Proxy Error ?

Im receiving a strange error message within GRID (Oracle 10.1.0.4.0/Aix5.2) every time I try and start/stop a Db on the ‘Startup/Shutdown:Specify Host and Target Database Credentials’
Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )
Whats causing this issue ?

In order for you to configure the Management Service to use a proxy server, this task is pretty similar as to configure a proxy server in a browser, you must declare the proxy server, its port and the exceptions where the proxy is to be skipped.
1. Edit the Oracle management server configuration file:
ORACLE_HOME/sysman/config/emoms.properties
2. Either add or comment out and configure these entries at the above referred file:
proxyHost=proxyhost.domain
proxyPort=proxy_port
dontProxyFor=.domain1, .domain2, .domain3, ...
3. You must rebounce your OMS so this file can be re-read.
This is the manual approach. This configuration can also be done at the same grid control at the configuration section.
~ Madrid
http://hrivera99.blogspot.com/

I am getting an error that says there is a proxy connection that is unsupported. I have no proxy connection. It happened after I downloaded the new version of firefox.

I downloaded the new version of Firefox. When it was finished installing, I pulled up a new browser. It said something along the lines of "proxy connection error" with nothing other than "try again". I restored the computer to the previous day to counteract the download, and now firefox will not open at all.
It is a HP G600, Vista.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Error during database connection to the database : MS SQL Server 2008 R2

Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AM

Hi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub.

Whenever I use a search engine, I keep getting the error message "The connection was reset while the page was loading".

I am able to access the internet, but none of the search engines like Google, Yahoo or Bing will work. the page will not load. I get the error message:
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Content Server Error: 407 Proxy Authorization Required

Hi Experts,
I am new to Content Server and have recently installed Content Server 6.40 with MaxDB 7.8 database on a Windows 2008 server.
The installation completed successfully and IIS server was configured as per guide. The Content server is running when checked through URL on server.
Next, we created a new repository with following details, but are facing "HTTP error: 407 Proxy Authorization Required" while testing the connection.
Settings in OAC0
Content Rep.    A1
Document Area: ArchiveLink
Storage type: HTTP Content Server
Version no.: 0046
HTTP server: <IP of Windows server where CS is intalled>
Port Number     1090
HTTP Script     ContentServer/ContentServer
Transfer drctry C:\temp
HTTP Port 1090 is open from SAP system(HP-UX) to Content Server(windows) and there is no firewall between the 2 servers, but we still see the error in OAC0 and CSADMIN. I also tried setting the security parameter to 0 in contentserver.ini file, but that didn't help either.
The content server was installed using administrator user.
Would appreciate your inputs on what am I missing?
Thanks.
Regards,
Varun

Hi Varun,
Please change Document Area: ArchiveLink .
Remove Archive link and change it to Document Management system ( DMS)
Check the results and post the output.
Regards,
Deepak Kori

Error in Proxy

Error in Proxy
SSL_ERROR_CONNECTION_LOST
Performing the connection test by clicking the "Test Connection" in transaction SM59, I am getting ICM_HTTP_SSL_ERROR.

Hi,
Check the following threads:
ICM_HTTP_SSL_ERROR for plain HTTPS with RFC Destination type G
ICM_HTTP_SSL_ERROR
SSL_ERROR_CONNECTION_LOST
Error 'Create failed : Argument not found' in SM59
Thnx
Chirag

ABAP Proxy: Error calling Proxy

Hi guys,
Here I am with another amazing mistake.....
After searching the forum, reading some suggestions, notes, I'm a little bit lost on how to figure out what is wrong...
I've created a receiver ABAP Proxy. XI should call this proxy and receive the consequent response.....
I've tested the ABAP Proxy, everything is working fine...I've encountered some errors but was able to bypass them... But this one is getting hard...I've found one or two similar threads, or with the same error description but I had no luck in overcoming the error....
So, what is the problem....:
When XI is calling the ABAP Proxy I get:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">EXCHANGE_PROFILE_ACCESS</SAP:Code>
<SAP:Stack>Error while reading exchange profile for system DEV and client 100</SAP:Stack>
I've searched the exchange profile but everything seems ok...
The user has all (and more) the authorizations needed....
Can you guys give me some hints? Or suggest any attempt....?

Kumar,
as I said before, in SPROXY i can test the interface with no errors....
In the Application System the sldcheck returns no errors and the RFC Destinations return no errors on the connection tests...
I really can't understand what this problem might be...
Problem solved
What was it? Well, I'm really not sure...Like most of the threads related to this topic it's quite an awkward problem....I've tested some RFC connections which were created, changed some parameters, restarted the system and voila....
Thanks
Message was edited by:
Gonçalo Mouro Vaz

ABAP Proxy connection Between PI and SRM for XMLs

Hello Experts,
We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
error ...
*We saw the error during debugging. This error is preventing XML output
to be sent to PI.
BBP_BD 002 An SLD system has not been assigned to logical system
Thanks,
Mayur

Thanks all for a quick reply. I also had to take following step to achieve the task.
adding the XI system to the SRM config - SRM Server -->
Technical basic Settings --> Define System Landscape? (also please
associated documentation in that link for XI)
Thanks,
Mayur

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing

Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.J

Hi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J

MDM Profilemanager Error "attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed"

I'm running Profilemanager on Yosemite Server. Main Problem is, that i cannot apply integrate further devces thru Profilemanager or https://URL to MDM/mydevices. Error simply nothing or Internal Server Error in the Browser
HTTP Error Log shows the following permanently errors for a connect to Port 3328 and 3329 on localhost.
[Fri Oct 24 09:13:53.604064 2014] [proxy:error] [pid 3420] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed
[Fri Oct 24 09:13:53.604262 2014] [proxy:error] [pid 3420] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Fri Oct 24 09:13:53.604292 2014] [proxy_http:error] [pid 3420] [client xx.xx.xx.xx:23688] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://URL to MDM/profilemanager/
[Fri Oct 24 09:13:53.604515 2014] [proxy:error] [pid 3420] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Fri Oct 24 09:13:53.604535 2014] [proxy:error] [pid 3420] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
Any idea how to fix that?
Martin

Thanks for he info. I looked into the /Library/Logs/ProfileManager/dmrunnerd.log File:
It logs the login-process of the ipad to https://. ../Profilemanager and alo to https://. ../mydevies. but if tap to "sign in this ipad" in the page https://.. ./mydevies there are no events logged to the file. ipad says on the display "500 internal server error"
Apache Log says:
[Mon Oct 27 10:20:52.072725 2014] [proxy:error] [pid 2135] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed
[Mon Oct 27 10:20:52.072931 2014] [proxy:error] [pid 2135] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Mon Oct 27 10:20:52.072960 2014] [proxy_http:error] [pid 2135] [client xx.xx.xx.xx:12854] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://. ../mydevices/
[Mon Oct 27 10:20:52.073156 2014] [proxy:error] [pid 2135] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Mon Oct 27 10:20:52.073175 2014] [proxy:error] [pid 2135] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Mon Oct 27 10:20:52.073187 2014] [proxy_http:error] [pid 2135] [client xx.xx.xx.xx:12854] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://. ../mydevices/
Is there another Logfile i can look into?
Martin

HTTP Proxy Connection for sharepoint-webservice endpoint in SMP

hi all,
I want to consume share-point services(soap based) through SMP. for that i am creating HTTP Proxy Connection for sharepoint web service endpoint in
SMP. i have done with creation of proxy connection without any error but while testing (on REST_CLIENT add-ons) it showing following error :
Status Code: 400 <?xml version="1.0" encoding="utf-8"?> <error ><message xml:lang="en">Error occurred while connecting to the Gatewaynull</message> </error>
Can anyone help me....
Thanks in advance.

hii Andrew,
Here are screenshots of proxy connection configuration,
security configuration:
Application creation:
connection white listing :
Error message in Rest Client:
Regards,
SupriyaD

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Error in Proxy connection

Similar Messages

Maybe you are looking for