Error in PS/SD Price Interface

Dear Colleagues
Has anyone come accross the following error:
No expenditure items found
Message no. VPK1310
Diagnosis
No expenditure items matching the selection were found.
System Response
No processing possible.
Procedure
Resource-related billing contains no expenditures for the posting timeframe you specified. Specify a different timeframe.
In the case of quotations, there are no costs in the project or service order. Check whether any have been planned.

n o reply

Similar Messages

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

System.InvalidOperationException: Call to Excel Services returned an error. --- Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry. We ran into a problem completing your request

0
HI All,
I am having problem with the power pivot dashboard.
power pivot dashboard processing job fails with the follwoing error message.
SP 2013 with 2008 r2
SQL 2014 power pivot on new analysis server.
Data refersh of cube and database works finw form the power pivot gallery.
The Execute method of job definition Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob (ID 726034a7-b9a9-45a6-b720-640b3f785e49) threw an exception. More information
is included below. Call to Excel Services returned an error.
ULS error:
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry.
We ran into a problem completing your request. ---> Microsoft.Office.Excel.Server.WebServices.ExcelServerApiException: We're sorry. We ran into a problem completing your request.
at Microsoft.Office.Excel.Server.WebServices.ApiShared.ExecuteServerSessionMethod(Boolean hasSessionId, String sessionId, CoreServerSessionMethod coreWebMethod, String name,
Boolean skipFeatureCheck)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookInternal(String workbookPath, Boolean editingMode, String uiCultureName, String dataCultureName, Boolean
newWorkbook, Boolean suppressRefreshOnOpen, Boolean openExclusive, Status[]& status)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookEx(String workbookPath, String uiCultureName, String dataCultureName, Boolean exclusive, Status[]&
status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.<>c__DisplayClassa.<OpenWorkbookEx>b__9(ExcelService svc, Status[]& status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall) -
-- End of inner exception stack trace --- -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall, String methodName, Object[] parameters)
at Microsoft.AnalysisServices.SPClient.ExcelApi.OpenWorkbookEx(String fileUrl, String uiCultureName, String dataCultureName, Boolean exclusive)
at Microsoft.AnalysisServices.SPClient.ASSPClientProxy.OpenWorkbookModelForRefresh(String workbookPath, SessionLifetimePolicy lifetimePolicy)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.RefreshUsageCube(GeminiServiceApplication application)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.Execute(Guid targetInstanceId)
Thanks
Ravi

HI Ravi,
Did you find the solution?
Thanks in advance
Regards,
Faraz Javaid

An error occured within an XI interface: Exception occurredS:BBP_CF:037

Hi
I am getting an error as described below in XI . The error is while calling inbound proxy . This is a PurchaseOrderConfirmation in SRM system. has any one faced a similar exception ....how to debug this ...is it an error in abap code
An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line:
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
- <standard>
<faultText>An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
Prashanth

Hi Prashanth,
Check these..
R/3(MM) -XI- SUS Scenario Error
PurchaseOrderConfirmation in SRM 4.0
cheers,
Prashanth
P.S Please mark helpful answers

Error when trying multiple inbound interface determination for IDOC

Hi !
I have this scenario: File -> XI -> IDOC.
For each source file, I need to send multiple idoc packages, all to the same business system, but each package should be the result of different interface mappings.
All mappings have same source and target message types...e.g. source: MT_MyFile, target: CREMAS04.
To avoid creating a generic mapping program, we need to duplicate the current mapping program, make it handle the new case, and then add it as second interface mapping in Interface Determination, with same inbound interface, but different interface mapping, without conditions. All interface mapping should execute.
We are receving this error:
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:P1>
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:Stack>
Any clues?
Regards,
Matias.

Hi Satish !
Thanks.
I need to send different IDOCs to SAME business system.
In Interface determination I need this:
Inbound Interface -
Condition -
Interface Mapping
IF_1 no condition M_1
IF_1 no condition M_2
I need to send BOTH IDOC packages to same business system.
But it keeps throwing the posted error.
Regards,
Matias.

Error when determining the inbound interface

Hi Experts,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Scenario Steps
1) No Condition in Interface Determination
2) 0..unbounded in Message Mapping and Operational Mapping.
3) E1KNA1 is mapped to E1KNA1
4) E1ADRMAS is mapped to E1ADRMAS
5) One Message Mapping and 1 Operational Mapping.
Thanks in Advance.
Sriram.

Hello,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
Since your scenario makes sure that the 2 files are created, there is no need to use multi-mapping. Rather, you can use an interface determination split. To do this:
1. declare xml_file1 as service interface 1, xml_file2 as service interface 2
2. do not change target occurrence in message mapping and operation mapping, maintain it as 1..1
( 2 operation mappings)
3. in ID, add the two service interfaces in your interface determination
At runtime, it will split into two inbound interfaces.
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Were you able to declare the 2 xml_files as two separate service interface(different names) in your operation mapping?
Hope this helps,
Mark

SIOCSIFFLAGS: Unknown error 132, could not set interface eth1 UP. Help

After lots of trouble getting my wireless card working and installing the ipw2200-fw drivers to get it working i have encountered an other problem.
I set up a netcfg profile called mynetwork but now whenever i try to connect using netcfg mynetork, i get:
SIOCSIFFLAGS: Unknown error 132
Could not set interface 'eth1' UP
Being a noob I have no clue how to fix this. Anyone know how to make it work?

See this bug report for some clues:
https://bugs.archlinux.org/task/19507
Also, duck duck go/google is your friend: please search before posting...

JDeveloper Error(16,8) 'class' or 'interface' expected

I have just installed JDeveloper for 11.5.10 RUP5 OA Framework and extended the Purchase Requisition Lines EO (PoRequisitionLineEO). Everything seemed to work okay. However, in the first step of deployment, to compile the .java class, when I select Make rnPoRequisitionLineEOImpl.java, I receive the following compiler eror:
Error(16,8): 'class' or 'interface' expected
My sense is that this may be an environment setup issue as this is the first time I'm using JDeveloper and the first time I am extending OA Framework.
Any advice on how to resolve?
Edited by: Kit on Jan 29, 2010 2:42 PM

This was an end-user error. Additional code had been added to the .java source code that was not in a class.

Application Error occured within the XI Interface

Hi,
I am trying to get the payload from XI system to SRM system.
By looking in SXMB_MONI,
On XI side,the message has been sent successfully.
But
I am getting the following error while receiving the message on SRM side.
"An error occured within an XI interface: SLD system T90CLNT090 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1".
Could anybody please tell me what may be the problem?
Thanks and Regards,
Rohini.M

hi,
have a look at this thread:
Business system not known to SRM
it shows how to add a business system in SRM
Regards,
michal

An error occurred within an XI interface: Exception occurred

Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,PO Response, ASN,GR and INVOICE.
In which PO, PO Response and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error i SXMB_MONI it is showing following error:-
An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;
What does this error means?
Do anyone have solution to this problem.
it's urgent
Thanks in advance
Thanks and Regards
Sami

Hi,
As far as I understand this issue is not related to XI. Itseems there is some configuration mistakes from the SUS side.
Please check with the functional consultant.
Regards,
Kumar
P.S: Reward Points if Helpful!!!!!

An error occurred within an XI interface: Exception occurred A:BBP_PD:002

Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,ASN,GR and INVOICE.
In which PO and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error shown below.
An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;
Do anyone have solution to this problem
it's urgent
thanks in advance
thanks and regards
Sami

Hi
Please see the following SAP OSS Notes, which will definitely help ->
Note 922190 - SRM-SUS: Confirmation response can not be identified in SUS
Other related OSS Notes ->
Note 1026638 - GR Output Integration with MM-SUS Scenario for R/3 <= 47-
Note 1051424 - Incorrect display of SUS Confirmations status
Note 1026326 - Cannot accept GR with role SAP_EC_SUS_INVOICER
Related links ->
SUS to SRM PurchaseOrderConfirmation error for limit order
Re: SRM ServiceAcknowledgementConfirmation fail going into SUS
Cancellation from SUS hangs in XI interface
Hope this will help.
Regards
- Atul

Error in PO - Net price becomes too large

Hi Gurus,
Maybe you can help me with this issue.
I am trying to update the net value of a PO already created from 28,500.00 ZAR to 80,238.00 ZAR and this error message apperars:
Net price in ZAR becomes too large
Message no. 06 217
Diagnosis
The calculated net price in currency ZAR becomes greater than the maximum price ("99999999999") defined in the system.
Procedure
Make sure your entries are correct.
Check the following:
The exchange rate, if the currency differs from the local currency;
The conversion order unit --> order price unit.
Do you know why it is happening?
Thanks in advance

Sorry,it didn't check reply abt conversion,check this links
http://www.sapfans.com/forums/viewtopic.php?f=6&t=316429
http://www.sapfans.com/forums/viewtopic.php?f=6&t=209632&p=621291
Edited by: Jeyakanthan A on Jun 29, 2010 11:58 PM

Error -354809 occurred at VBAI Interface - Open Inspection.vi

I am using a NI Smart Camera 1722 and am stuck at Open Inspection.vi of my code. It throw this error:
Error -354809 occurred at VBAI Interface - Open Inspection.vi
Possible reason(s):
Vision Builder AI: (Hex 0xFFFA9607) The validation of the inspection returns errors.
Very basic code here. Not sure what the path is supposed to be for the .vi to work correctly. I do not have Real-Time so I need a full path name. Any help on this issue would be appreciated.
Attached is the simple test vi.
Attachments:
NICameraTest.vi ‏20 KB

This typically happens if the inspection you try to open is using resources (cameras, frame grabbers, serial ports, etc.) that are reserved by another process (or the simulate acquisition step can't find the image file to open). Try opening the inspection in the regular VBAI executable, which may provide more detailed information about which step in particular is failing. If this works without errors, make sure to shut down VBAI, it may be reserving the device the inspection needs to open. Make sure MAX is shut down as well. Once no other process is using resources the inspection needs to reserve, it will work. You can also try opening one of the shipping examples that don't use any resources.
Hope this helps,
Brad

JET install: ERROR: Unable to configure network interface Exiting to shell

Using SUNWjet v4.4.4 I'm trying to build a server using update 5 x86 which seems
to work with one notable exception. The JET server and the build server do not
reside on the same subnet. In order to get around not being able use PXE boot
to boot the build server I'm booting from DVD after making the following modifications
to the grub menu entry:
kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install nowin -B
install_config=x.x.x.x:/opt/SUNWjet,
sysid_config=x.x.x.x:/opt/SUNWjet/Clients/testclient,
install_media=x.x.x.x:/export/install/media/s10u5-x86,
install_boot=x.x.x.x:/export/install/media/s10u5-x86/boot
This seems to kick off the installer however it fails to bring up the network interface:
SunOS release
Configuring devices
Solaris Interactive Text ( Console Session )
ERROR: Unable to configure network interface Exiting to shell
# ifconfig bge0 x.x.x.x up netmask 255.255.255.0
# route add default x.x.x.1
# exit
Using RPC
Installation continues without any errors
It seems that I'm forced to bring up the interface manually each time.
This is what the template looks like:
base_config_ClientArch=i86pc
base_config_ClientEther=XX:XX:XX:XX:XX:XX
base_config_ClientOS=s10u5-x86
base_config_client_allocation="grub"
base_config_products="custom eiscd sds"
base_config_sysidcfg_nameservice=NONE
base_config_sysidcfg_network_interface=PRIMARY
base_config_sysidcfg_ip_address=x.x.x.x
base_config_sysidcfg_netmask=255.255.255.0
base_config_sysidcfg_root_password="XXXXXXXXXXXX"
base_config_sysidcfg_system_locale="en_CA.UTF-8"
base_config_sysidcfg_timeserver=
base_config_sysidcfg_timezone="Canada/Eastern"
base_config_sysidcfg_terminal=vt100
base_config_sysidcfg_security_policy=NONE
base_config_sysidcfg_protocol_ipv6=no
base_config_sysidcfg_default_route=x.x.x.1
I've also tried setting the following:
base_config_sysidcfg_network_interface=PRIMARY
vs
base_config_sysidcfg_network_interface=bge0
I don't mind doing this manually but of course I would much rather have it work automatically.

Try giving more network interface settings in the sysidcfg settings:
network_interface=value {primary hostname=host_name
                          default_route=ip_address or NONE
                          ip_address=ip_address
                          netmask=netmask
                          protocol_ipv6=yes_or_no}
See http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh2r?a=view

Posting of miro doc: Error as "Moveing aveage price for material negative"

Hi All,
Here is an Uregent issue
Client has done MAP for material as Zero (MR21)
before that,
import PO with fright clearing vendor but added in the same
vendor and payment is done already .
but as he had made MAP as Zero
know when post the PO the system is through the error
as" Moveing aveage price for material is negative",
know the client wants the MAP to be increased to Some
value for that material.
pls give some solution to it !
Regards,
Rajashekhar

hi,
Use T.code: MR22 to increase the qty from ZERO to whatever qty then you can verify the MIRO
G.Ganesh Kumar

Error in PS/SD Price Interface

Similar Messages

Maybe you are looking for