Error in PSA deletion

Hi every one,
While i am deleting PSA data i have gone these step
selected Info Source>right click and select Delete PSA data->in the next screen given the data(19.12.2006) at Before ---> start
after doing this i got an error representing
Incorrect start date: 25.09.2006; Start time 11:00:00
where i am not able to find out this error ...
My observation
1.where their is no load on this data ....
2.on 23rd error load was made into green
can any one post ur suggestion plz
Regarding
SAP
Message was edited by:
SAP

Hi,
Please, take a look at the start conditions. Maybe one job have already scheduled on 25/09/2006.
Bye,
Marcelo

Similar Messages

PSA deletion variant - Syntax error in program "SAPLRS_PSA_DEL_GUI

Hi.
Recently, we have implemented the note 1357168 to overcome the error "Object name &1 after the prefix has to start with ABC...XYZ".
But after that if we maintain any PSA/Change log variant we are getting the below error Syntax error in program "SAPLRS_PSA_DEL_GUI.
We have identified the class CL_RS_PSA_DEL_MASS_DELETION for that. but not able to figure it out what is the issue.
please help.

check this
Note 1388321 - 7.01SP6:Short dump in maintaining PSA deletion variant

/BIC/ namespace not modifiable, can't create PSA delete variant in process

Hello,
When I attempt to create a PSA delete process in a process chain, I get an error message as such:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063
I have had Basis dot his for me before and it worked, but it takes a lot of change menagement to do this. I have asked Basis to leave it modifiable in SE06, but they will not. Is that the only way to be able to create PSA process variants is to have Basis use SE06? I looked in Object Changeability, but nothing stuck out. I should not have to have Basis do this task every time. Please let me know if there is a better way.
Thank you.
Brent

Hi Brent
I believe /BIC/ namespace should remain modifiable where you are creating PSA deletion process.
You can check if that is the case in your system.
Check in TRNSPACE table with namespace /BIC/ .. changagle flag should be X. I think it should be in your production also
Regards
Anindya
Edited by: Anindya Bose on Mar 8, 2012 4:52 AM

PSA Deletion through Process Chain

Hi Experts,
Currently I am working on the BW3.5 version. I would like to delete the old PSA req through Process Chain. I need some clarification. Please provide me your suggestions. Thanks in advance.
1)In SAP-BW 3.5 version, there is only one process type u2018Deleting Requests from the PSAu2019 is available to do this activity. This process type can delete the requests from the PSA only or Will it delete PSA and Change Log tables!!!!! In the SDN threads, some people said it delete the PSA requests only and some said it delete the PSA requests as well as Change Log.
2)Currently we are having six process chain and each has master & transaction data load(Data load through PSA).
Similarly I am planning to create six PSA deletion process chain which includes master & transaction data deletion. Here I am got little complication on finding Object Name(PSA Table Name).Please refer the screen shot.Is there any short cut to find full list of Object Name(PSA Table) which is currently available in the Process chain every day load.
3)On the request selection, i prefer "Only sucessfully booked/updated req.". I did not select"Only those req with errors,that are not booked in a data target". Please share your view on this selection preference.
http://img818.imageshack.us/img818/3963/psa1.jpg
Thanks,
RR

Hi Murali,
Thanks for the response. I do understand about the identifying the data source & PSA retention period(days). Let me elaborate my question little more. Thanks.
1)In SAP-BW 3.5 version, there is only one process type u2018Deleting Requests from the PSAu2019 is available to do this activity. This process type can delete the requests from the PSA only or Will it delete PSA and Change Log tables!!!!! In the SDN threads, some people said it delete the PSA requests only and some said it delete the PSA requests as well as Change Log.If i am not mistaken, In BW 3.5 PSA deletion will leads through Change Log also.Am i right?
2)Currently we are having six process chain and each has master & transaction data load(Data load through PSA).
Similarly I am planning to create six PSA deletion process chain which includes master & transaction data deletion. Here I am got little complication on finding Object Name(PSA Table Name).Please refer the screen shot.Is there any short cut to find full list of Object Name(PSA Table) which is currently available in the Process chain every day load.In the very day process chain, we are having many stages in master & transaction load. So I can go through info pkg level and find the data source,then i can identify the PSA table name. But is there any other simplest way to find the PSA table name.
http://img818.imageshack.us/img818/3963/psa1.jpg
3)On the request selection, i prefer "Only sucessfully booked/updated req.". I did not select"Only those req with errors,that are not booked in a data target". Please share your view on this selection preference. May i know that which option is optimal on normal business process. If i did not select both options, then will that delete all the request in PSA!!!
Thanks.
RR.

PSA Delete

Dear ALL,
During data load,after successfull completion on loads,i get errors in PSA request and delete showing error message as Path not found for the particular ZPAK i.e for the particular infopackage.
Please let me know what would be the reason and how it can be fixed.
Thanks.

Hi,
Load is successfull and the infopackage is in delta update after running successful load while getting in to PSA deletion which is maintained after 7 days am getting error for this datasource as
There is no path from LOADING ZPAK________________________ to PSA delete with Data source name am getting this error message.
Thanks

Error in PSA with special characters

Hello,
I'm having a problem with sprecial characters in PRD system.
This happen with standard extractor for Confirmations in SRM module, 0BBP_TD_CONF_1.
I have 5 records with error in PSA. The field that have the error is 0bbp_delref and it has the text: GUIA ENTREGA Nº2.
The error message says that field OBBP_DELREF has special characters that are not supported by BW.
The field is char 16 and in spro I have the characters:
QWERTYUIOPASDFGHJKLÇªNºZXCVBM/~^´`* '()"#$%&!?.-0123456789Â«»<>
In QUA, I created confirmations with this text and it worked fine and the characters in SPRO are the same.
Any idea?
Thanks and best regards,
Maria

Hi Maria,
There will be no issue with update rules as the issue is with Data..
ALL_CAPITAL should resolve your issue, .otherwise try individually executing those spl characters in RSKC..
have you tried in SPRO...
Check in this table RSALLOWEDCHAR in SE11 and find what all characters allowed(permitted) in PRD system...
please go through the above mentioned blog once
Thanks,
Sudhakar.

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Source system in PSA deletion variant

Dear Experts
In process chain PSA deletion variant,in source system column I will give the Development source system name(C6D),and after transport to the Quality styem(C6Q) Should I change this source system manually in qualtiy or system automatically will pick up the corresponding source system name?If not,what is the possible solution since we dont have any access in quality system.
Cheers
Rajesh

Thanks for the reply.I got doubt because in DEV we have to enter manually both DS and SOURCE SYSTEM manually...after importing to Quality will it change the source system name?...Can i take for grant...Pls confirm....
Rajesh

H how to find if the psa table is included in psa deletion process chain

Hi all
can anybody tell me .
I have a psa table it's technical name is /BIC/B*
h how to find the above psa table is included in psa deletion process chain or not
please help me

Hi
Ope the PC in RSPC1 -->go to planning view of process chain
in left side you will find different types of process types.
under other BW process types folder -->you will find process type "Delete request from PSA"
drag this into your process chain planning view and customize it based on your requirements.
check the below article for step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Acrobat X, error message "cannot delete pages, pages are in use"

Recently updated to Acrobat X. After saving a pdf, if I try to delete a page or pages, I get an error message "cannot delete pages, pages are in use". I have to close acrobat and reopen my document to continue deleting pages. Is there a fix for this? So far, I think Acrobat 7 was better that X!!!!!!!!!!!!!!!!!!

What OS are you using? Ive read that preview pane in windows vista and 7 causes an issue with the delete page feature. The suggestion was generally to turn the preview feature off.
Heres technet article on turning off the feature:
http://social.technet.microsoft.com/Forums/en/itprovistadesktopui/thread/d2a9c302-1ef1-4d9 8-9e81-a88603ae8405

**** Error from PSA **** while loading 0comp_code (processing- info obejct)

Hi,
I am getting error **** Error from PSA **** while loading info object attributes for company code (0comp_code). I am not using oly info obejct in processing.
below is the error message.
Error from PSA ****
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
I checked in SM37 in both source system and BW. I do not see any matches. I have tried loading other master data (for eg. customer) and all were successful. That clearly indicates that connection between ECC and BW systems correct (RFC connection, logical systems etc).
please advise.

Thank you for your answers and points assigned.
I am not using PSA in my data transfers i am using info object only option. I am also getting same error even if I use PSA . no change in error message.
when i click on psa in monitor. i am getting below error message.
-No data packet numbers could be determined for request.
detailed error message: (all are in red color)
Requests (messages): Errors occurred (RED)
      -Data request arranged (GREEN)
     - Error in the data request (RED)
Extraction (messages): Missing messages (RED)
        -Missing message: Request received (YELLOW)
       -Missing message: Number of sent records (YELLOW)
      -Missing message: Selection completed (YELLOW)
Transfer (IDocs and TRFC): Missing messages (RED)
Processing (data packet): No data (RED)
please advise and points will assigned. thanks for your help.

Error in PSA Update

Hi,
I have this error in PSA Udate:
msg: "Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070530"
I have 10 records in PSA . 9 are ok. 1 record shows this error. 3 other records also have 0CALDAY = 20070530 as value. But, they did not return errors.
Why this particular record error ?
Thanks in advance

Hi Raj,
check this links:
Time conversion from u0085.Any help on this error in the PSA?
Re: Inventory Management extraction.
hope this helps
cheers
Sunil

PSA deletion -clarification regarding QM status

Hi Guru's
We r on BI 7.0 SP13. We are loading HR data with full loads via infopackages to PSA and subsequently from PSA to infocubes via DTP. We have configured a process chain to delete the PSA requests which are 1 day old in order to make sure that we do not have duplicate records uploaded via DTP from PSA to infocube.
The setting on the PSA deletion is to delete requests that are 1 day old and only sucessfully booked requests/updated in data targets. If we maintain this setting system is not deleting the PSA requests which are more than i day old. but if i remove the checkbox for "only successfully booked requests" system deletes all requests which are more than 1 day old.
When i checked the status of the requests, it has a "green" color for technical status and the radio button " back to technical status" is selected. My question is Does the system check if these PSA requests are having QM status is green before deleting them if we select "only sucessfully booked requests"? if yes how to set the QM status as green automatically in the requests that are only loaded to PSA?
i also verified the table RSREQDONE in order to check if these PSA requests are having "QM status fields" populated. only technical status were green for these and the QM status fields were not populated.
I want to get a clarification whether these requests that load to" PSA only" are supposed to have a QM status or they are supposed to have only the technical status? if they are suppose to have a QM status , then how to set it automatically ?
thanks

Hi Anil,
Full Upload Request does not concern any DELTAs whatsoever. Just populate the SETUP Tables in R/3, give parameters (if any) and load, thats it. Thats why you dont need to switch previous request to RED because a FULL Request does not care on the status of the last update.
DELTA Update Request is different. The system needs to know if the last DELTA extraction was a failure or success. It needs this info so that the system will know if it will request for a new fresh batch of updates (DELTAS/Changes) or RESEND previous batch of updates (DELTAS/CHANGES) in case the previous DELTA Update is a failure...
Hope I have helped. If i did, please grant points...
--Jkyle

PSA deletion

Hi Expert,
I have an issue with PSA deletion. There is one PSA table which is already included in the PSA deletion chain. we have checked this PSA deletion step and it is working fine. when i go to manage option of data source , I find only seven requests as per my expectation.
Whereas Early watch report says this PSA has consumed 400 GB. This figure is constant from last one year.I have checked with Basis guy and they said they cannot do repartitioning.
Only option I have to truncate this table at OS level.
Does anyone know any other option which can be used to free this big chunk of DB space?

Hello Dhiraj
things I would do here.
1. Consistency check of PSA via RSRV
2. Check the PSA table name from Manage screen and then try to see what is the exact amount of space it is taking from DB02.
3. If you are on oracle you can check what is the space actually required versus what is the space this table is taking. You can get this information from early watch report ( based on your ST-PI version) or you can run a script to check that.
If you find actual space required is much less than what it is consuming right now you can go for re-organization.
Please note single table reorganization is possible via brconnect and that can be done online
4. If nothing works last option is to truncate the table ( based on your business requirement obviously ). You or your Basis team member can do it even from SE14. I do not find any need to waste 400 GB of space for one PSA.
Regards
Anindya

Error in PSA deletion

Similar Messages

Maybe you are looking for