Error in QA after objects are transported from Dev

Hi,
I have transported the objects from DEV to QA and during testing in QA, I am facing the following error.
Interface mapping Object ID 12345678 Software Component 12345678 does not exist in runtime cache
Thanks,
Raj

Raj Says..
Interface mapping Object ID 12345678 Software Component 12345678 does not exist in runtime cache
Cache Problem:
Refresh SXI_Cache and CPACache
Refresh CPACache as below
http://<host>:<port>/CPACache/refresh?mode=full
Regards,
Madan Agrawal

Similar Messages

Handle metadata of configuration objects when transported from DEV to QA?

All,
I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
<i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
So my question is, for what all objects of ID needs metadata to be entered manually in QA.
Party?
Business systems(business systems, bus servcies, integration process)?
Communication channels?
Receiver determination?
Interface Determination?
Sender Agreement?
Receiver Agreement?
I appreciate your reply
Thanks
KK

Hi,
first of all it's not adapter's metadata
(adapter's metadata is something completely different)
the "thing" that will dissapear is the adapters'
configuration (configuration of your communication channels) - that's all
RFC destination (idoc adapter) ftp server (file adapter) etc.
basically all you need to do
is to fill it one every system (QAT, PRD etc.)
Regards,
michal

STMS , logs? for transports from DEV 200 to QAS 200, 201 & 202

We are transport from DEV client 200 to QAS client 200, 201 and 202 using stms and specifying which client we want the transport to go to.
After the transports, how can the development team find the logs for these transports.
Right now, we as basis can see the results after each of the transports to each client. IF there is an error then we stop and ask the dev. team to review the logs. However IF the transports go thru without error, HOW can we go back over time to confirm that there were in fact NO errors for transport to each client?
Thanks
Maria

Hello Maria
After you import the transport,in the STMS menu only you can see the option for checking import logs
just click on that and you will be able to see the import logs of a transport.If you drill the logs,you can see everything what the transports has done,what objects have been moved,also if there are any warnings or errors
Rohit

Notification about errors during transport from DEV to QAS server.

Hi Guys.
Is there any way of alerting the user about the errors that arise when moving the transaction from DEV client to QAS client?
For Instance,In DEV the program may be working fine and while transporting sometimes errors can arise by not including all the necessary files while moving to QAS server.
Kind of auto-email facility notifying the user...

Hi,
there might be some standard functionality for TMS but if you can't find anything then you can still use BADI CTS_IMPORT_FEEDBACK. The only method if this BADI is called right after import of each transport.
Cheers

Transports from Dev System to Quality System, Objects copied in Local reque

Hi All,
I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have a single work bench request i.e 9yyyyyy for transport , with all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
Please provide the solution for the situation
Thanks in advance
suitable answers will be awarded
Prasad

Hi,
1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
or,
The objects are not assigned to correct development class/package.
2. When we try to create a workbench request, we will see only the request and that is fine.
3.Now, release the local request containing your objects.
4.Include the local transport objects to the new workbench request (Ctrl + F11).
and release and transport the workbench request.
Pls assaign the points if it is useful.
Regards,
Raghavendra Rao.Kolli.

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Short and to the point: If they don't show up, your system doesn't support them. Refer to the Tech Specs on teh product pages and make up your mind...
Mylenium

Hi, messages still appear in iPhone search even after they are deleted from iPhone.

Hi, messages still appear in iPhone search even after they are deleted from iPhone.

Yes and as long as you are signed into iCloud - you can even use that phone to iMessage
The messages stay on there until you wipe / erase / restore your old phone

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Transporting from DEV server to Production Server

Dear Experts,
Like in ABAP and other SAP modules we are having Transport Requests to transport from Dev server to Production server In XI how can we transport all the configuration done by me from Dev server to Production server.

Hi,
In XI we can transport in two ways :
1) File Transport
2) Using CMS which needs configuration to be done
Using the File Transport you can easily the Export the Objects and Import the Objects in the Target system.
Select the Object in the Design or Configuration ->right Click you will find Export option.
When you select the It creates the .tpz file which can be imported in the Target System
Using file transfer or CMS we transport xi objects.
Transporting XI from DEV to QA
Look into this blog for how to export / improt IR and ID objects,
XI Software Logistics II: Overview
XI Software Logistics 1: SLD Preparation
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Regards
Ganga

Transporting from DEV to QA

We have 3 different sld's for DEV,QA,and PRD systems.
i need to transport my XI objects from DEV to QA.i'm working on standard XI contents.
i need answers for my following questions.
1.if i use full export for transporting SLD from DEV to QA,can i use the same tecnical systems and business systems in QA?
Can T.S and B.S also get transported from DEV to QA?
2.In such case how to define business systems groups and transport targets?
pls don't send any blogs..i've all the blogs
thanks
Abhijit

Hi,
1.if i use full export for transporting SLD from DEV to QA,can i use the same tecnical systems and business systems in QA?
Can T.S and B.S also get transported from DEV to QA?
You can use same technical systems and Business systems.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
2.In such case how to define business systems groups and transport targets?
You need to create Transport Groups on your QA SLD. One for Dev and One for QA. You can create Transport Groups only for Integration Server Business Systems.
And this is why you would need to export the Dev XI technical System and Business System from the SLD of Dev and Import it into the QA SLD.
2. Create the transport groups and then assign all Dev Business Systems to Dev Group, all QA Business Systems to QA group and then create the transport targets.
You use the Option related Integration server in the Business Systems to assign a Business System to a Group.
Refer
Problem regarding xi transport
Thanks
Swarup
Edited by: Swarup Sawant on Feb 26, 2008 11:55 AM

Can not transport from DEV to PRD (Hang up)

Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
   ==> Stop all TP running in OS level
   ==> Delete all pending job in Import Monitor (with truck logo)
   ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

Hi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff

Query transport from dev to qlty giving transport error

Hello Xperts,
I am facing a problem while transporting a query from dev to qlty. below is the error i am facing...
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Element 4620F4R3R2BI818DARVFRP91N was copied from 'modified' to 'active'
Error when activating element 48V2NGDS1SU2F6PRD2V40SG7F
Element 9QXVN0Q42LJRX27HIKCWF1UAO is missing in version M
Element 48ZV1IROPVLXOOLRS0C49D1CB was copied from 'modified' to 'active'
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request BD1K903806 completed
     Start of subsequent processing ... 20080417160233
     End of subsequent processing... 20080417160244
please let me know your comments for the same. I would be assigning good points if some one can advice me on this problem
regards
rohit

Hi,
one query elements is missing in your transport order :
Element 9QXVN0Q42LJRX27HIKCWF1UAO
so it can not activate element
48V2NGDS1SU2F6PRD2V40SG7F
Regards
Cyril

Error in routine(Inactive) while transporting from DEV to QA

Hi All,
I am currently working on moving the development from BI 7.0 Development to QA environment, while trying to move stuffs, i am facing an error stating that 2 of the routines are in INACTIVE Version, which stops me to move the objects to QA,
The error message looks like,
Object 'F0Q23H75A4P0BH0K98BKJBH48' (ROUT) of type 'Routine' is not available in version 'A
I can't able to find which routine is this, and how to find, which routine is inactive.
This stops my work to move other objects to QA. since, i am trying to move the process chain for masterdata along with its dependant objects to QA, The list is big, and so trying to move everything along with the process chain,
Can anyone, please help me out to find, what this routine stands for and how to find and make it ACTIVE, and move to QA,
I will assign points to everyone who responds,
Thanks in advance,
Regards
Pooja

Hi Shiva,
Its not able to find any entries for that specified ID, but anyways,, found why its getting failed, one of the infoobject had a empty routine, with no values, so,, took out that,, and activated and now it went through,
Anyways, thanks for your help Shiva,
I will assign points for it
THanks
Pooja

Error : WIS 00001 - Some objects are no longer available in the universe.

Hi ,
I have performed some manual actions in OLAP universe i.e move and rename of objects. Object works fine when i drop them in "Result Objects" pane.If the same object i drop in "Query filters" and if i select filter option -'value(s) from list' i get the below error:
Error - "Some objects are no longer available in the universe. See your Business objects administrator. (WIS-00001)".
Is it something to do with manual action performed in universe? Please help me ....
Regards,
Pallavi

Hi,
For the objects which you are getting error, do the following in designer
1.select the objects -> go to properties ->check for LOV options i.e if it is disabled then you want get those values so click on edit -> it goes to lov query panel -> run the query and check the lov's for the object-> check export with unv-> save the object n unv & Export the unv->then try it in your report creation.
Cheers,
Suresh Aluri.

How to trace if objects are deleted from a scenario

Hi Experts,
Can you please tell me if some of my objects get deleted from my scenario how can I trace? like by which user this is done or any log is there from where we can find this one?
Thanks
Sugata B

Just run the scenario if you are aware of the entire process by disabling target system adapter (if needed)
then you can easily trace it out.
If you know details about mapping go to SXI_CACHE and chk there, for objects of your scenario
Rajesh

Error in QA after objects are transported from Dev

Similar Messages

Maybe you are looking for