Error in quant generation after creation of inspection lot

Hi All,
Our client is using the standard customer return process which is integrated with the QM.
Problem : If the return sales order/delivery contains two similar line items with same material/batch then system creating different inspection lots after post goods receipt (Mov type 651) but only one quant is getting generated for total quantity with only one inspection lotn umber. Quant is not generating for remaining inspection lots. Please suggest the solution or SAP note?
Thanks in advance.

Hi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS

Similar Messages

Notificaton after creation of inspection lot

Hi,
We are creating one inspection lot from PM order after releasing the order. Is it possible to create one notification by the system once inspection lot is created. This notification should be created by the system after inspection lot is created. This should not be through result recording. Please help.
BR
Manoj

Hi Manoj,
Notification cannot be activated automatically. You need to record defects only then you can use the notification component of QM. You need to record the defects at Inspection lot level or operation or chearacteristic level and against that defect activate the notification. You can activate the notification for critical defect class. For this you need to check the IMG. So, these are the options available to you. There is no need to go to results recording screen. You can do it through QF11 - defects recording or QA32. Else you need to create manually through QM01, as our friend said.
Reward if cleared and close the thread.
Keerthi.

Restrict creation of inspection lot for certain work centers

Hi
My client needs to restrict the creation of inspection lot at certain work centers although QM is active for all material processed in these work centers.
I am using the function module 'EXIT_SAPLQAAT_002' of QAAT0001 for this purpose. Z04 inspection type ( with Post to insp stock) is maintained for all these material.
A different Z table is there , where material-work center combination is maintained for which no inspection lot is required.
Logic provided so that system searches Material-Work center from production order then compares it with the Material-Work center combination with the maintained Z Table.If both found same then no inspection lot will be generated.
But an error message (Change the inspection stock of material XXXXXX in QM only) appears for all those material while doing confirmation in CO11N . Hence system does not allow to complete confirmation for those material where QM is active.
Please suggest if i am using the correct Exit or any further improvement is required.
Thanks and regards
D Mohanty

Hi
Actually the issue is resolved now.The problem was with coding where we were using Table-AFRU for reading prod order details.But AFRU does not consider fresh orders for which it was replaced with AFKO.
Also the Z table must be maintained as Plant-Material-Work center combination prior to go for any order confirmation.
Thank you all who have gone through the post , hope this will help those who have to map the same scenario at their end.
Regards
D Mohanty

PR Creation at Inspection lot creation

Dear QM Experts
can we generate Purchase requisition with the creation of Inspection lot, Automatically.
in my case there are some inspection operation performed by external agency for which he charge some amount for services.
for this i created a control key of external services and assign this in the inspection plan in a separate operation and enter all the required data like cost element, vendor, Purchasing oganization and material group but when i created the inspection lot , PR is not generated,
should this requirement be cater by SAP?
Regards

Hi,
Why do not you try here Source inspection.
During crsation of purchase order lot will get generated .you can inspect material before its coming to your place..
You have to activate 0101 inspection type active.
Qinfo record you have activate source inspection.
Even in procurrement key in custamizing you can have option if material get rejected.
Once purchase order created to create lot you have run transaction QI07.where you can click on create lot.after saving this transaction you can get lot..Then you record result as per toyr requirement like from external services.
Regards
SANIL

BAPI for Creation of inspection lot

I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB

2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit

Creation of Inspection Lot in QM Module without inspection lot origin

I want a solution regarding creation of inspection lot without assigning inspection lot origin to material code.
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order. In my view we do not require assigning inspection lot origin on the material code as process has been mapped through Qinfo record. By assigning the inspection lot origin on the material is unnecessary step in our process.
Can any body suggest solution regarding above problem.
Yatindra Bahuguna

Dear,
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order.
Little bit stuck up.... can you explain the above in detail...
As I understood you developed a function -
- Which creates material inspection lot
- Which Pre Delivery Inspection applicable on particular purchase order.
YES?
Regards,
Syed Hussain.

Stop Automatic Creation of Inspection Lot for a condition

Dear Gurus,
While Creating a Delivery through a Sales Order, Config is maintained such that "Inspection Lot" will be automatically Generated.
Now Business wants to Stop this Automatic Creation of Inspection Lot only for a Particular Delivery Type and for a particular mode of Transport.
Do we have any User Exits / BADIs to achieve this requirement.
Please let us know.
Thanks in advance.
Regards,
Vinay Mutt

Hi
To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
regards
Manish

Scenarios for "manual creation of inspection lot"

Hi QM gurus!!
I would just like to ask the main function of QA01 or "<b>Manual creation of inspection lot</b>"
What are the cases/scenarios where this tcode is used? I would really appreciate if you could help me.. Thank you.
Regards,
Heinrick Palad

HI,
The table below provides a brief overview of the functions you can use to process inspection lots. Appropriate cross references are included for the more extensive tasks or for those for which additional information is available.
Prerequisites
The inspection lot processing functions can be linked to various authorizations that are checked by the system whenever you try to process an inspection lot. The following types authorizations are relevant to inspection lot processing:
Material authorizations
The material authorization for QM is stored in the material master. For more information, see Creating and Changing QM-Specific Data for a Material.
Inspection type authorizations
This authorization controls which inspection type the user can access in order to create an inspection lot. The inspection type authorization is plant-specific.
No authorization checks are executed in QM when an inspection lot is created automatically.
Features
Function
Pushbutton / Menu path
What you should know
Accessing the initial screen for the inspection lot processing functions
Logistics ® Quality management ® Quality inspection ® Inspection lot processing ® Inspection lot
Creating an inspection lot manually
See Creating an Inspection Lot Manually
Changing an inspection lot
Choose Change
Enter the number of the inspection lot you want to change and then choose Enter.
Displaying an inspection lot
Choose Display
Enter the number of the inspection lot you want to display and then choose Enter.
Creating a new batch in an inspection lot
See Batch Creation in Inspection Lots
Cancelling an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Cancel lot.
See Cancellation of an Inspection Lot
Blocking/unblocking an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Block lot.
To unblock an inspection lot, choose Inspection lot ® Functions ® Unblock lot.
When you block an inspection lot, you cannot process the lot further. You must unblock the lot if you want to perform any additional operations.
Transferring stock in an inspection lot
See Stock Transfers
Making corrections to inspection lot quantities
See Corrections to Inspection Lot Quantities
Creating a QM order
Call up an inspection lot in the create or change mode and choose Goto ® Insp. lot acc. assgnmt.
See QM Order Creation
Resetting the sample calculation
See Resetting the Sample Calculation
Printing inspection instruction/sample-drawing instruction
See Printout of Instructions
Approving a task list
Call up an inspection lot in the create or change mode and choose Inspection lot ® Functions ® Give approval
If the task lists in your company must be approved before they can be used, you should make sure that only approved task lists are assigned to an inspection lot. If the system selects a task list that has not yet been approved, you can use this function to approve the task list (provided you have the necessary material authorization).
this link help u.
http://help.sap.com/saphelp_erp2004/helpdata/EN/be/00bbe7ca5311d2961800a0c930e04c/frameset.htm
reward is usefull.
tahnks.

Automatic creation of inspection Lot upon GR

Hello all,
i have a problem with QM module. I want that when QI is active in material master the system automaticcaly create an inspection lot. At the moment when i post the GR the system doesn't create it.
The GR is posted in a storage location manage by WM, so i have customize also the interface WM-WM.
Can you help me, please?
Thanks
Matteo

Hi Matteo,
The settings required for automatic creation of inspection lot are as follows:
1. Tick the procurement active tick on the material master and assign a QM control key.
2. Assign inspection type 01 and set this to active.
3. Create the q-info record for the material, plant and vendor combination.
4. Set the inspection control to inspection active in the q-info record (no need for the status profile unless you controlling which inspection type to create depending on the specific status).
5. Also ensure for the PO you receiving that the stock type is set to quality inspection and the QM control key is specified.
This should create the inspection lot automatically without the need of a status profile.
Regards,
Roderick

Automatic creation of Inspection Lot

Hi ppl,
We are implementing QM module for our client, and we have built a custom program to create the Inspection Lot automatically after the GR is posted.
But when there are multiple Inspection Plans existing for the material, then the system fails to create the Inspection Lot automatically as it is not able to decide which Inspection Plan is to be used.
I couldn't find any userexit or BADI to achieve the requirement.
Please let me know if there is a way to automatically tell the Inspection Lot creation transaction that which Inspection Plan & which task from the Inspection Plan is to be used.
Inspection Lots are created using transaction QA01.
Regards,
Dawood

Hi
To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
regards
Manish

Avoiding creation of inspection lot for certain vendors.

Hi,
There is one requirement from my client side , that Inspection lot should not be created for certain vendors ( Issuing plant also consider as vendor here).
The correct requirement is if it is transfered from other plants it should not create the lot and on the other vendors it should create.
We have a have a option through maintaining the QM info record but it was not maintained earlier and newly creation is too difficult.
I remember there is some exit is available to overcome this. Any one having the earlier experince on this...Provide the exit and FM name... High priority one.
Regards
Pragash

Dear Pragash
1) You can maintain Quality info Record in enmass using QI06. Only maintain for the vendor you need to skip.
2) This exit can help you in controling the inspection lot
QAAT0002 Control of acceptance lots/goods receipt
QBCK0003 Extended QM check for goods receipt
Regards
Gajesh

Manual creation of inspection lot

on october 1st i received the material (QM is activated for this Material) 2000 qty from the vendor 100011
system automatically created Inspection lot 2000 qty......in that i i have posted only 1000
now in MMBE i am seeing 1000 in QI stock now today i have to move the stock from QI to unrestricted.....
Manually i created inpection lot using QA01 for the Remaining 1000 qty......after that i am clueless how to proceed with pls guide me.............with the following steps.......

Hi
Creating Manual inspection lot for the remaining 1000 qty will not prompt for the stock posting. Here u can only record the results for the same.
For the balance stock posting, u need to go to the same inspection lot( old one which was created for the 2000 qty against GR). To search for this lot, in QA32,
select the radio button " select all inspection lots"
Provide the date range. if u are not sure about the dates, keep blank
provide material, batch etc.
Now after execution, check the inspection lots for the status SPRQ or SPST
Select the insp lot & click on Usage Decision. Post the balance stock to unrestricted.
Thanks
Sachin

Control on the Creation of Inspection lot

Hi all,
In my requirement, we have a material which is subcontracted and in the process, we will have some rejection. Hence the rejected material will be received in to the system with an account assignment category (cost centre). For both the line items in the PO, the inspection lot will get triggered, but the requirement is that the lot should not be generated for the rejected material.
thanks & regards
Chaitanya Rayaprolu

Hi Chaitanya,
Well, I observe a functional loophole here.
1.     As you mention, you inward rejected material against cost center, it means you must be using account assignment category K in PO.
2.     My question is, if the material is rejected, why you are inwarding it against cost center as it consumes the value on your account and not on vendoru2019s account.
3.     Ideally it should be debited on vendoru2019s account if its vendoru2019s fault.
4.     The practice should be, inward all the material irrespective of rejection. Reject the material through 122 movement and proceed for payment for the acceptable quantity.
Letu2019s talk about your scenario where you donu2019t want inspection lot generation
1.     Whenever you inward the material with account assignment category as K the stock gets consumed at the same moment and you observe no rise in stock level.
2.     But if you have activated inspection type 01 in material master, system creates inspection lot for this movement.
3.     Kindly note this inspection lot is stock irrelevant.
4.     That means you need not do stock posting. Only UD is sufficient as the lot doesnu2019t contain any stock.
5.     Albeit you donu2019t want system to generate lot, you may explore user exit QPL10001 and write your own logic that whenever account assignment category is K do not create inspection lot.
Regards,
Anand Rao
Edited by: Anand Rao on May 9, 2011 2:47 PM

Material document cancelaation after genarating the Inspection lot

Hi All,
Pls let me know how to cancel the material document after Inspection lot created in QM
Regards
Raj

hi
it is difficult once you have posted the material using QM ,kindly refer the following link for reversing the stock posting
http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/b9b3341a933f50e10000009b38f83b/frameset.htm
regards
thyagarajan

Avoid creation of Inspection Lot by MIGO

Hi All,
In some cases I want to avoid the creation of an Inspection Lot, It can be done by configuration.
How can I do that?.
I was thinking to change the "Status GR Doc." but In the badi MB_MIGO_BADI that field can by changed.
Please any help??

Hi,
Check tcode OMJJ. Set a movement, and go to 'deactivete QM inspection..' and change the flag 'QM not active'. Read the documentation and the help on F1.
I hope this helps you
Regards,
Eduardo

Error in quant generation after creation of inspection lot

Similar Messages

Maybe you are looking for