Error in query execution after upgrade

Hi Gurus,
013 An exception with the type CX_SY_CREATE_OBJECT_ERROR occurred, but was
neither handled locally, nor declared in a RAISING
       Message no. RS_EXCEPTION000
    013 The object could not be created: The class \CLASS=CL_IM_RS_BCT_PA
does not exist
       Message no. RS_EXCEPTION000
    013 The definition of query Y_XP_SALES_QUERY2 (InfoCube Y_XP_SAL) was
savX
    013 Query Y_XP_SALES_QUERY2 (InfoCube Y_XP_SAL) was saved.
    013 The query was successfully generated.
any suggestions are appreciated
Thanks
Praveen

We upgrade the system from BW 3.1 to 3.5 NW
I run t-code rsrt1
I select 0FIA_DS11/ZASSETST1 query and I try to execute, It is working fine
I select 0FIA_DS11/ZASSETST1 query and I try to Generate report, I am getting following error
An exception with the type CX_SY_CREATE_OBJECT_ERROR occurred, but was neither handled locally, nor declared in a RAISING
Message no. RS_EXCEPTION000
The object could not be created: The class \CLASS=CL_IM_RS_BCT_PA does not exist.
Message no. RS_EXCEPTION000

Similar Messages

  • Critical Hard Disk Free Space Error on Lenovo G500 after upgrading from Win8 to Win8.1

    I encountered an error with my harddrive after upgrading my Lenovo G500 from Windows 8 to Windows 8.1. The error is coming up under the Lenovo Solution Center. The error reads "Some partition in your hard drive has less than 9.5% of its capacities. It suggests to click on Fix Options; System; Storage Devices. Then it displays Internal Hard Drive ST1000LM024 HN-M101MBB.The solution center now displays 8 different partitions labled as follows:
    Drive Name: Space:
    W: WINRE_DRV. 694.99 MB free of 999.99 MB
    E... EFI SYSTEM 260 MB
    U.. UNAMED PARTITION. 0.97 GB (THIS IS THE DRIVE PRODUCING THE ERROR)
    M. MICROSOFT RESERVED PARTITION. 128 MB
    C. MICROSOFT RESERVED PARTITION. 850.43 GB FREE OF 890.72 GB
    W. WINDOWS RECOVERY ENVIRONMENT. 155.46 MB OF 449.99 MB
    D: WINDOWS RECOVERY ENVIRONMENT. 22.74 GB FREE OF 24..99 GB
    P...PBR_DRV. 1.8 GB FREE OF 13.01 GB
    I have tried to run disk clean up and optimize drives which were suggestions from the Lenovo Solution Center but neither has been successful in removing the error. Any assistance you guys can provide will help me out a lot
    Thanks,
    Dan

    I got an error when i tried disk repair ("the underlying task reported failure on exit - 1 HFS volume could not be repaired, 1 volume could not be repaired"). Is that the source of my problem?
    Hi and a warm welcome!
    Absolutely, good deduction.
    If DU can't fix it after a couple more tries then, your best bets are DiskWarrior from Alsoft...
    http://www.alsoft.com/DiskWarrior/
    Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    This last one would require another HD with plenty of space to recover to.
    Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.

  • No Fact table error on every report after upgrading frm11.1.1.5 to 11.1.1.6

    All,
    All the dashboard reports were working fine on version 11.1.1.5. After upgrading to 11.1.1.6 i am getting below error
    I have followed all the In-place upgrade steps and all were finished without any errors.
    [2013-03-17T21:44:08.000+00:00] [OracleBIServerComponent] [TRACE:3] [USER-34] [] [ecid: 62a0baeaae7f41bf:-31b079a9:13d6cea7626:-8000-0000000000004616] [tid: 12d8] [requestid: 68fd0001] [sessionid: 68fd0000] [username: Administrator] -------------------- Query Status: [nQSError: 14025] No fact table exists at the requested level of detail:
    Any help is appreciated
    Thanks,

    After applying patch to make it 11.1.1.6.6 everything worked. All reports working without any issues.

  • Error on starting MDS after upgrading from MDM 7.1 sp04 to sp05

    Hi ,
    I tried to upgrade my local setup from sp04 to sp05.
    I used sapins to upgrade with update option.
    In the second  last step when we get option to which server you want to start after upgrading i select all three servers
    i.e. mds ,mdis,mdss
    This installation completed with error.
    In the log file  i found this logs.
    The problem is i am able to start mdss and mdis of updated sp but not mds.
    In the console i can see the version of mdss and mdis to sp05 but there is no version coming in the case of mds.
    Please help me on this isssue
    WARNING 2010-07-22 00:46:55.224
    Execution of the command "C:\usr\sap\MDM\MDS00\exe\sapcontrol.exe -nr 00 -host INLD50054767A -function
    GetProcessList" finished with return code 4. Output:
    22.07.2010 00:46:55
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    mds.EXE, , GRAY, Stopped, 2010 07 22 00:42:21, 0:00:00, -1
    INFO[E] 2010-07-22 00:46:55.224
    CJS-30086  Instance MDM/MDS00 [STOP] did not start after 5:00 minutes. Giving up.
    ERROR 2010-07-22 00:46:56.318
    FCO-00011  The step startUpdatedInstances with step key |MDM_Update|ind|ind|ind|ind|0|0|startUpdatedInstances was executed with status ERROR .
    Thanks,
    Sudhanhsu

    Hi Sudhanshu,
    You could check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed. It solved same problem on our side.
    Best regards,
    Jah

  • Error in Netweaver CE after upgrade to SP04

    Hi All,
    I installed Netweaver Ce 7.1 first. Then I upgraded this to SP04. After upgrading this is giving following error in every page of portal:
    java.lang.NoSuchMethodError: com.sap.tc.ls.useragent.LSBrowserDetection.getLSUserAgent(Ljava/lang/String;)Lcom/sap/tc/ls/api/enumerations/LSUserAgent;
      at com.sap.tc.webdynpro.clientimpl.html.client.RenderManager$AbstractSystem.<init>(RenderManager.java:950)
      at com.sap.tc.webdynpro.clientimpl.html.renderer.lightspeed.base.LSRenderManager$System.<init>(LSRenderManager.java:223)
      at com.sap.tc.webdynpro.clientimpl.html.renderer.lightspeed.base.LSRenderManager.<init>(LSRenderManager.java:52)
      at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.getRenderManager(HtmlClient.java:1859)
      at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillStaticTemplateContext(HtmlClient.java:1216)
      at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponseHead(HtmlClient.java:436)
      at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.<init>(ClientApplication.java:436)
      at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.createApplication(ClientApplication.java:366)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationCreate(AbstractExecutionContextDispatcher.java:115)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppCreation.doService(DispatchHandlerForAppCreation.java:37)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
      at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationCreate(ExecutionContextDispatcher.java:86)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:65)
      at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:618)
      at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.createApplication(ApplicationSession.java:757)
      at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.<init>(ApplicationSession.java:190)
      at com.sap.tc.webdynpro.clientserver.session.ClientWindow.getApplicationSession(ClientWindow.java:169)
      at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:648)
      at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:241)
      at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:259)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
      at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToDispatcherContext(ExecutionContextDispatcher.java:146)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
      at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
      at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
      at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
      at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
      at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
      at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
      at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
      at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
      at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
      at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
      at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
      at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
      at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
      at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Thanks in advance
    Raktim

    Hi Raktim,
    Have you installed trial version of CE7.1 in your local desktop?
    Please ensure that you are upgrading from SP03 to SP04. if you upgrading from SP01, SP02 to SP04 then it will not work.
    Please follow the sequence SP01>SP02>SP03>SP04.
    Hope this will help you.
    Thanks
    Arun

  • Error during sxi_cache refresh after upgrade 3.0 to PI 7.11

    During sxi_cache we are getting the error
    com.sap.aii.utilxi.misc.api.InternalErrorException: Internal error: Link from Communication Component  | IP_NSP1007_001_PS020_BeoordelingOudeManager to object type "MAPPING" with role "IFOUT" is not permitted
    where IP_NSP1007.. is an Integration Process.
    we also getting the error when displaying a configuration object :
    Original language Dutch for current object collides with permitted display or editing languages EN; contact your system administrator
    regards meinhart Lingbeek.

    Hi,
        The problem is with the patch level after upgrading to PI 7.11. AS suggested by Hareen..Apply the latest patch (note:1344144). The problem will be resolved.
    Cheers!!!
    Naveen.

  • Error opening a pdf after upgrading adobe reader

    a client of mine can't open some pdf's after upgrading adobe reader. he gets the message:
    "There was an error processing a page. Invalid ColorSpace."
    What can he do? he works with windows.

    Hi,
    I like to share the discussion as I am confronted with same or similar problem. Since last Saturday the pdf attachments I sent with my e-mail messages show a blank pdf document upon opening. To make sure it really was the case I sent message with pdf attached to myself: bingo! Have recently updated to Adobe Reader 9.4.1. Using WinXp SP3 and MS Outlook 2003 SP3.
    Any suggestions?

  • ERROR:java.lang.NullPointerException after upgrade 5.5 to 6.0sp1

    Hellos.
    I get this error message after upgrading from IdM 5.5 to Idm 6.0. I use mysql as repository so the upgrade was not easy.
    The ERROR appears when I click on the "List Accounts" tab on the main menu.
    However, I can listUsers from the $WSHOME/bin/lh console program quite happily.
    The "Find Users" tab also works. I can search for and find and edit users.... but when I save I am returned to List Accounts page which then returns me the NullPointer.
    What is going on????
    Has anyone else met this and overcome it?
    TIA

    I imported the default UserUIConfig.xml and was able to �List Accounts� in the menu page. But my customized UserUIConfig.xml is throwing the NullPointerException.
    This Is what�s happening in my code.Customized original UserUIConfig with these lines of code.
    Added:
    <SummaryAttrNames>
    <String>employeeId</String>
    <String>supervisorStatus</String>��..
    <QueryableAttrNames>
    <List>
    <String>employeeId</String>
    <String>organizationCd</String>
    <String>supervisorStatus</String>��.
    <AppletColumns>
    <List>
    <Object name='name'>
    <Attribute name='label' value='UI_ATTR_NAME'/>
    <Attribute name='sortBy' value='true'/>
    </Object>
    <Object name='lastname'>
    <Attribute name='label' value='UI_ATTR_LASTNAME'/>
    </Object>
    <Object name='firstname'>
    <Attribute name='label' value='UI_ATTR_FIRSTNAME'/>
    </Object>
    </List>
    </AppletColumns>
    Deleted:
    <AppletSortColumn>
         <Integer>0</Integer>
    </AppletSortColumn>
    <ListViewAttributes>
         <Map>
         <MapEntry key=`DisplayBracketOnBranch`>
         <Boolean>false</Bolean>
              �����������
    </ListViewAttributes>
    Can anybody suggest me if I am missing anything here? Should i be looking at someother xml file? Is the attributes in <AppletColumns>, a major concern?
    Thank You.
    G

  • Query slowness after upgrading to 10.2.0.4

    Is anyone else having spatial query problems after applying the 10.2.0.4 patch? We applied it to our DEV and QA environments last weekend and we are now seeing a degragation of spatial queries.
    On the database we upgaded a query that has been running fine for years now takes 5.5 hours to complete. The same query on a database that has not been upgraded takes 5 minutes.
    Both databases are on servers with the same hardware and operating system (Solaris 10 64bit), the only difference is the database version.
    We have an SR open, but we aren't feeling the love yet.

    Hi Robenour,
    7003151 is not just for Linux, it's for all platforms, and will definitely help 10.2.0.4 and 11.1.0.6 spatial performance.
    Below is the current list of Oracle Locator/Spatial/MapViewer patches I recommend.
    The only one specific to Solaris is 5888136 for 10.2.0.3.
    I recommend all the other patches for all hardware platforms.
    Most of the following patches are available on Metalink.
    If the patch is not there for your hardware platform/database release, please log a SR with Oracle support and request a backport.
    Hope this helps. Thanks.
    Dan
    For Oracle 10.2.0.3, patches:
    · 6980648 - Bug fixes and improved performance
    · 6329260 - Bug fixes and improved performance
    · 5888136 - Only if you are running Solaris - improved performance
    · 6956194 - Bug fix if working with geodetic data
    For Oracle 10.2.0.4, patches:
    · 7003151 - Bug fixes and improved performance
    · 6989483 - Improved performance
    · 7046751 - Apply this patch if you applied patch 6989483 (necessary for some GIS software to work)
    · 7237687 - Bug fix if working with geodetic data
    · 6956194 - Bug fix if working with geodetic data
    · 7276032 - Bug fix if working with geodetic data
    For Oracle 11.1.0.6, patches:
    · 7003151 - Bug fixes and improved performance
    · 6989483 - Improved performance
    · 7046751 - Apply this patch if you applied patch 6989483 (necessary for some GIS software to work)
    · 6956194 - If working with geodetic data
    For MapViewer 10.1.3.1
    · 7195504 - Bug fixes and improved performance

  • Syntax error in standard program after upgrade

    Hi,
    After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
    The error says:
    The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
    imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
    The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
    We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
    Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
    I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
    Can you shed some light on this, please ?
    Thanks a lot
    Ale

    Hi Ale,
    If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
    Regards
    Bill

  • Weird query problem after upgrade to 10g

    After upgrading from 9i to 10g I've noticed that one query slowed down drastically (from 100[ms] to 30[s])
    SELECT ... FROM first_table LEFT OUTER JOIN second_table ON ...
    WHERE first_table.number_column = '453' ...
    What's weird is the redundant apostrophes around number in WHERE clause. The same query without those apostrophes executes in 100[ms].
    I know it doesn't make any sense to put numbers inside apostrophes but it results from the application structure. Since I can't change the application I need the way to improve this query from the database level.
    I tested this query with other databases (9i and 10g) and there is no differences whether the number is in apostrophes or not.
    What does it depend on?
    Any ideas how to speed-up this query?
    Thanks in advance
    Kunta

    Hi Gerard,
    When the query window comes from a table Oracle always recommends:
    1) Use the /*+ ordered */ hint
    2) Put the table the quiery window comes from (geometry-2 in the query) first in the from clause
    However, your query is also written very strange. Do you know about SDO_WITHIN_DISTANCE? Or are you trying to do SDO_ANYINTERACT (since the distance is 0)?
    So I would write the query you have as:
    SELECT s.ROWNUM
    from NOMINATIONS O, COUNTIES s
    where sdo_relate(S.GEOM,o.geom, 'querytype=WINDOW mask=anyinteract')='TRUE';
    or in Oracle10g:
    SELECT s.ROWNUM
    from NOMINATIONS O, COUNTIES s
    where sdo_anyinteract(S.GEOM,o.geom)='TRUE';

  • Programs generated using ABAP query vanishes after upgrade

    Hi all,
    The programs generated using abap query in sq01 vanishes after upgrading from 4.6C to ECC 6.0 system.
    Is this a know issue, do we have a solution for this?
    Can anyone help
    Thanks
    Senthil

    Hi,
    Try to generate the Queries again in the new system...using the FM : RSAQ_GENERATE_PROGRAM
    The input needed is the Query name and the usergroup...The details can be obtained from the table AQLQCAT(local queries areas) and AQGQCAT(global areas queries).
    Once you generate the query , a program gets created...
    if you have lots of queries to be genretated, write a custom report by fetching the data from the above tables and use the FM to generate the same...
    Hope this helps you..
    Reward if useful
    Regards
    Shiva

  • Error in hierarchy variable after upgrade to BW7.4 SP 7 from 7.0

    Dear friends,
    We have upgraded from BW7.0 to BW7.4. While executing query with hierarchy variable as input we are getting a dump. The hierarchy variable is used in customer exit. It was working fine before upgrade but after upgrade we are getting following error

    The <dname> field symbol is not assigned causing the dump.
    Line:  "LOOP AT <dname> INTO l_dname" is where the dump is occurring.  The previous line of code has an issue:
    ASSIGN ('(SAPSRRK0)<G_SX_RR>-SFC') TO <dname>.
    The assignment to <dname> in the code above is not occurring properly.  You can debug the query variable to see why (SAPSRRK0)<G_SX_RR>-SFC is not returning a value. 

  • Error in text formatting after upgrade to ECC6.0

    Hi all,
    After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box.  It seems that after upgrade, some of the text procedure in the configuration is missing.  Did anybody encounter this problem?  Please advise.
    Thanks.

    Hi Mei,
    Welcome to SDN.
    It seems the customizing for the texts (Transaction VOTX) is incomplete.
    Please check OSS Notes 150775 and 751690 for more detail information.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • "URGENT"Infopackage load error in process chian after upgrade

    Hi Gurus,
                   We have a strange issue in one of the process chain after upgrade from 3.5 to NW 2004s. In a process chain we have 5 info packages, 3 in parallel as they load data in 3 different cubes and 2 in series after successful completion of info packages on top.
    Now the process chain shows red info package with error message “ Last delta upload not yet completed. Cancel”
    When we check the RSMO, we find all the 3 loads on top finish successfully while in process chain log display as error at info package with above error message and process chain never advances. Actually loads finish successfully but process chain shows error in info package.
    When we investigated further, the request ID in failed info package in process chain shows different ID which never loaded in cube but data load takes place successfully using different request ID(checked in RSMO and request in cube).
    I suppose the process chain trigger the info package load twice simultaneously, one load get successful and second load request failed in log as first one is running…this is my guess…
    Please help me as this is an urgent issue.
    Regards,
    Anil

    Hi All,
    We fond the root cause of the error message. Actually when we trigger the process chain, the info packages loads get triggered twice after an interval or around 2 minutes.
    Here if zero records are loaded then second request ( after 2 min) get loaded too with zero records but if first request is loading some records then second request will find the data load still running and will throw error as last delta still not finished.
    Have you seen this scenario before?
    Regards,
    Anil

Maybe you are looking for