Error In Quotation - ASAP
Dear All,
Our all item are excisable. When user select this item in quotation and try to post it we get the following error:
There are Excisable Item(s) with non-CENVAT tax code [Message 140080010-13].
In quotation client will never select the CENVAT code. How to solve this problem.
Any solution will be highly appreciable.
swapnil
hii
check the tax code which you have selected for particular row,
error says there is excisable item with non cenvat tax code , you cannot select a non excise tax code for excisable item
if the scenario is where in you dont weant to calculate tax still you are using cenvat tax then create a tax code with zero %
thanks
Rizz
Similar Messages
-
Error in Quotations.
When a Quotation Id(Hyperlink) is clicked in the result list, the overview page is not displayed. That is, The Quotation details are
not displayed. This issue is reported when Webui is logged-in with a different login user id.
If the webui is logged-in with my own login user id, I am able to view the quotation details.That is, the above reported error
does not occur with my user id.
Note : This issue is reported in 2 specific Quotation Ids only. For other Quotations, We are able to view the overview page irrespective of the login user ids.
Can anyone please help me in this issue?
It will be very useful , if you give your valuable suggestions.
Thanks & Regards
KarthikeyanHi Karthikeyen,
Unfortunately, once the view configs are changed, the changes can not be reverted.
When a personalization is done, actually it is a config change but to to the specific user for specific component/view.
I guess you are on CRM2007 where this issue is more commonly seen.
When you delete the personalization, you can give USE, the component, view etc details too in that program so that it does not delete all changes to the user.
Once the personalization is deleted and error is gone, User can certainly redo the personalization , but manually only.
I am unable to recall at this moment if there is any utility class of function module handling personalization.
If i get any more details, i will post it.
We faced the same issue around 2 years back and we deleted the personalization because the fields in the personalization where no more there in the new config changes and it resolved the issue so i suggested it. That time , i had put the break-point in view-config-determine method and debugged it deeper till the point dump was raising and had found that it was getting for the personalization maintained views .
Regards,
Suchita -
Hi expert,
In my earlier thread "Error in quotation" -Error in Quotation
the thread some how got locked and I am not able to reward points and also not able to thank those whose suggestions helped me to solve the issue.
Please let me know how can I be able to unlock the thread.
ThanksHi Vinayak,
Actually u have asked a basic question "Error In Quotation" with out knowing the forum rules,insted of posting u might have search in google or SDN.
Actually, you are right but an other rule of the forum is to write in plain English words, so SMS style like using "u" instead of "you" is also forbidden...
Regards,
Olivier -
Error in Quotation upload to R3
hello experts,
we are working on CRM 5.0 & ECC 6. im having problems when uploading a quotation to R3. after the quotation is released, it is saved, then it shows that the doc is being distributed when i try to enter change mode, but in SMW01, it shows a single bdoc in yellow status 'After qRFC step (intermediate state)' . strangely there is no issue while transferring a sales order. can anyone shed some light on this.
thank you
deepanshuhello,
all settings are maintained in table SMOFPARSFA, this error seems to have cropped recently, as i was able to replicate this till this morning. i had been getting an error which said ' R3 adapter is called'. but now the bdoc ismt even showing that. -
Replication Error in Quotation from CRM to ECC
Hi All,
This is regarding the Replication error which we are getting in the Quotation/Orders in the CRM server, when the Quotation/Orders is getting replicated to ECC server.
Let me explain the process,
We have the Internet Sales Application (ISA Version 5.0) implemented with B2B Scenario.
Dealers create Quotes from ISA for Configurable materials. The Configurable material has a "knowledge base" version already created in ECC in the table "SCEKB". Based on the configuration of the material, the knowledge base version of the material gets updated time to time.
When dealers create Quote for Configurable material from ISA, the latest "knowledge base" version gets determined in the Quotation. As a process, a new knowledge base version for the configurable is created for the material subsequently.
When Dealers are creating Orders for the Quotation from ISA, the order gets created in CRM server but does not get replicated to ECC due to the following error.
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING (Notification A V1 854)
Item 000100 does not exist (Notification E V1 331).
We suspect that the Order when getting replicated to ECC, is trying to determine the latest "knowledge base" version in the system for the material and since there is a mis-match between the Order and the "SCEKB" table, the Order is not getting replicated to ECC.
Can someone tell me how to suppress the above error and get the Order replicated to ECC without any issues.
Thanks,
RaviHi Ravi,
Did you managed to get a solution for this?
We have a similiar situation, can you please provide an input if you have any?
Thanks,
Sindhur. -
Hi guys..
In Quotation (AG) the system is not automatically taking the sales office,sales group,ship to party,bill to party,payer and contact person.
What could be the reason?
What are the steps we need to take to solve these errors.
regards
vamshiHi,
Do following steps
1.Maintain Sales Area+Sales office +Sales group combinations in your organization structure (PPOMA_CRM)
2.Create a sold to party & assign sales areasales officesales group.
3.I assume you are using standard Quotation AG (So all settings have been mainatined already)
4.When you enter sold to party system will automatically pick Ship to party,bill to party & payer.
5.Mainatain contact person in Sold to party "Relationship Tab"
WIth Best Regards.
Rajendra -
EPM Workspace EPM Inside Frame error- Please help ASAP!!
Can someone please help me resolve below error with EPM-
I've created resports in web analysis studio and am emailing smartcut URL to about 200 users. 3 of the users are getting below error-
"EPM Workspace cannot function inside of a frame"
pop ups are allowed; java is up to date; hyperion 11.1.2.1.102
any tips?Hi,
The document can be found in support.oracle.com
I had pasted the contents though, which might be helpful
After embedding a Financial Reporting (FR) report or Web Analysis (WA) report to a Planning Task List using the Smartcut url in the Planning, and then try to open the report through Task list in Workspace, you will get the following error:
"EPM Workspace cannot function inside of a frame. Contact your system administrator."
Cause
This issue is caused by unpublished BUG 11854015 "ERROR OPENING PLANNING TASK LIST REPORT WITH "WITHNAV_GET"
Solution
Until a service fix is released to address this issue, the following workaround currently exists to resolve this issue:
1. Use the below URL while specifying in the Smart Cut, http://server.example.com:19000/workspace/WorkspaceLaunch.jsp?uri=index.jsp%3fmodule%3dwksp.relatedcontent%26repository_path%3d%2Fmyfolder-name-here%2Fmy-report-name-here
2. Replace myfolder-name-here with the name of the folder and my-report-name-here with the name of the report. The URL must be encoded.
3. You must use %2F where you would use a slash in the repository path. You might also need to encode the report name due to the double-byte characters in the report name. The encoding for % is %25. So, if the character %8a appears in the SmartCut URL for the report, then the encoding for the URL above would be encoded %258a.
Hope this helps,
Thank you,
Charles Babu J -
Error NEED HELP ASAP!!
I get this error. I belvie it is refering to this code below
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('TRY2WitterMay-16-2013', '!' at line 1
<cfif not form.company1 is "">
<cfquery username='#username#' password='#password#' datasource='#datasource#'>
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description)
VALUES(<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#jobappid#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.company1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.busphone1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.empfromdate1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.emptodate1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.startwage1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.endwage1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.leave1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.supervisor1#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.DESCRIPTION1#"/>)
</CFQUERY>
</cfif>
<cfif not form.company2 is "">
<cfquery username='#username#' password='#password#' datasource='#datasource#'>
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description)
VALUES(<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#jobappid#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.company2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.busphone2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employfromdate2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employtodate2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.startwage2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.endwage2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.leave2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.supervisor2#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.description2#"/>)
</CFQUERY>
</cfif>
<cfif not form.company3 is "">
<cfquery username='#username#' password='#password#' datasource='#datasource#'>
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description)
VALUES(<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#jobappid#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.company3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.busphone3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employfromdate3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employtodate3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.startwage3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.endwage3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.leave3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.supervisor3#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.description3#"/>)
</CFQUERY>
</cfif>
<cfif not form.company4 is "">
<cfquery username='#username#' password='#password#' datasource='#datasource#'>
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description)
VALUES(<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#jobappid#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.company4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.busphone4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employfromdate4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employtodate4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.startwage4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.endwage4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.leave4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.supervisor4#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.description4#"/>)
</CFQUERY>
</cfif>
<cfif not form.company5 is "">
<cfquery username='#username#' password='#password#' datasource='#datasource#'>
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description)
VALUES(<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#jobappid#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.company5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.busphone5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employfromdate5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.employtodate5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.startwage5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.endwage5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.leave5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.supervisor5#"/>,
<cfqueryparam cfsqltype="cf_sql_varchar" VALUE="#form.description5#"/>)
</CFQUERY>
</cfif>struct
Cause
struct
ErrorCode
1064
Message
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('REEEESMay-16-2013', '#',' at line 1
SQLState
42000
StackTrace
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('REEEESMay-16-2013', '#',' at line 1 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java: 39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm pl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:406) at com.mysql.jdbc.Util.getInstance(Util.java:381) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1030) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:956) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3515) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3447) at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1951) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2101) at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2554) at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:1761) at com.mysql.jdbc.PreparedStatement.execute(PreparedStatement.java:1021) at coldfusion.server.j2ee.sql.JRunPreparedStatement.execute(JRunPreparedStatement.java:91) at coldfusion.sql.Executive.executeQuery(Executive.java:1245) at coldfusion.sql.Executive.executeQuery(Executive.java:1008) at coldfusion.sql.Executive.executeQuery(Executive.java:939) at coldfusion.sql.SqlImpl.execute(SqlImpl.java:341) at coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:843) at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:533) at cfjobapp_process2ecfm454558273._factor9(E:\InetPub\imperialind\includes\jobapp_process.cf m:101) at cfjobapp_process2ecfm454558273._factor22(E:\InetPub\imperialind\includes\jobapp_process.c fm:99) at cfjobapp_process2ecfm454558273._factor24(E:\InetPub\imperialind\includes\jobapp_process.c fm:1) at cfjobapp_process2ecfm454558273.runPage(E:\InetPub\imperialind\includes\jobapp_process.cfm :1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfcontent2ecfm1009021074.runPage(E:\InetPub\imperialind\content.cfm:86) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfindex2dold2ecfm2038289319.runPage(E:\InetPub\imperialind\index-old.cfm:225) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:363) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:87) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext
array
1
struct
COLUMN
0
ID
CFQUERY
LINE
101
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor9(E:\InetPub\imperialind\includes\jobapp_process.cf m:101)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
2
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
99
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor22(E:\InetPub\imperialind\includes\jobapp_process.c fm:99)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
3
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
1
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor24(E:\InetPub\imperialind\includes\jobapp_process.c fm:1)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
4
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
1
RAW_TRACE
at cfjobapp_process2ecfm454558273.runPage(E:\InetPub\imperialind\includes\jobapp_process.cfm :1)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
5
struct
COLUMN
0
ID
CFINCLUDE
LINE
86
RAW_TRACE
at cfcontent2ecfm1009021074.runPage(E:\InetPub\imperialind\content.cfm:86)
TEMPLATE
E:\InetPub\imperialind\content.cfm
TYPE
CFML
6
struct
COLUMN
0
ID
CFINCLUDE
LINE
225
RAW_TRACE
at cfindex2dold2ecfm2038289319.runPage(E:\InetPub\imperialind\index-old.cfm:225)
TEMPLATE
E:\InetPub\imperialind\index-old.cfm
TYPE
CFML
Type
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException
DataSource
imperial
Detail
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('REEEESMay-16-2013', '#',' at line 1
ErrorCode
42000
Message
Error Executing Database Query.
NativeErrorCode
1064
RootCause
struct
ErrorCode
1064
Message
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('REEEESMay-16-2013', '#',' at line 1
SQLState
42000
StackTrace
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'leave, supervisor, description) VALUES('REEEESMay-16-2013', '#',' at line 1 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java: 39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm pl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:406) at com.mysql.jdbc.Util.getInstance(Util.java:381) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1030) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:956) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3515) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3447) at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1951) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2101) at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2554) at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:1761) at com.mysql.jdbc.PreparedStatement.execute(PreparedStatement.java:1021) at coldfusion.server.j2ee.sql.JRunPreparedStatement.execute(JRunPreparedStatement.java:91) at coldfusion.sql.Executive.executeQuery(Executive.java:1245) at coldfusion.sql.Executive.executeQuery(Executive.java:1008) at coldfusion.sql.Executive.executeQuery(Executive.java:939) at coldfusion.sql.SqlImpl.execute(SqlImpl.java:341) at coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:843) at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:533) at cfjobapp_process2ecfm454558273._factor9(E:\InetPub\imperialind\includes\jobapp_process.cf m:101) at cfjobapp_process2ecfm454558273._factor22(E:\InetPub\imperialind\includes\jobapp_process.c fm:99) at cfjobapp_process2ecfm454558273._factor24(E:\InetPub\imperialind\includes\jobapp_process.c fm:1) at cfjobapp_process2ecfm454558273.runPage(E:\InetPub\imperialind\includes\jobapp_process.cfm :1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfcontent2ecfm1009021074.runPage(E:\InetPub\imperialind\content.cfm:86) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfindex2dold2ecfm2038289319.runPage(E:\InetPub\imperialind\index-old.cfm:225) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:363) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:87) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext
array
1
struct
COLUMN
0
ID
CFQUERY
LINE
101
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor9(E:\InetPub\imperialind\includes\jobapp_process.cf m:101)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
2
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
99
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor22(E:\InetPub\imperialind\includes\jobapp_process.c fm:99)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
3
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
1
RAW_TRACE
at cfjobapp_process2ecfm454558273._factor24(E:\InetPub\imperialind\includes\jobapp_process.c fm:1)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
4
struct
COLUMN
0
ID
CF_JOBAPP_PROCESS
LINE
1
RAW_TRACE
at cfjobapp_process2ecfm454558273.runPage(E:\InetPub\imperialind\includes\jobapp_process.cfm :1)
TEMPLATE
E:\InetPub\imperialind\includes\jobapp_process.cfm
TYPE
CFML
5
struct
COLUMN
0
ID
CFINCLUDE
LINE
86
RAW_TRACE
at cfcontent2ecfm1009021074.runPage(E:\InetPub\imperialind\content.cfm:86)
TEMPLATE
E:\InetPub\imperialind\content.cfm
TYPE
CFML
6
struct
COLUMN
0
ID
CFINCLUDE
LINE
225
RAW_TRACE
at cfindex2dold2ecfm2038289319.runPage(E:\InetPub\imperialind\index-old.cfm:225)
TEMPLATE
E:\InetPub\imperialind\index-old.cfm
TYPE
CFML
Type
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException
SQLState
42000
Sql
INSERT INTO jobappemp(jobappid, company, busphone, empfromdate, emptodate, startwage, endwage, leave, supervisor, description) VALUES( (param 1) , (param 2) , (param 3) , (param 4) , (param 5) , (param 6) , (param 7) , (param 8) , (param 9) , (param 10) )
StackTrace
coldfusion.tagext.sql.QueryTag$DatabaseQueryException: Error Executing Database Query. at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:595) at cfjobapp_process2ecfm454558273._factor9(E:\InetPub\imperialind\includes\jobapp_process.cf m:101) at cfjobapp_process2ecfm454558273._factor22(E:\InetPub\imperialind\includes\jobapp_process.c fm:99) at cfjobapp_process2ecfm454558273._factor24(E:\InetPub\imperialind\includes\jobapp_process.c fm:1) at cfjobapp_process2ecfm454558273.runPage(E:\InetPub\imperialind\includes\jobapp_process.cfm :1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfcontent2ecfm1009021074.runPage(E:\InetPub\imperialind\content.cfm:86) at coldfusion.runtime. -
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Quotation missing error in sales order
Hi ,
While saving the Sales.Order in crm i am getting the error "Mandatory Quotation Missing", i have preceding document as Quotaion and billing doc replicated in r/3.
How to solve this error?? i have checked every thing.
Kindly help iam i missing anyy thing.Hi Shoki
Did u check your Quot. Determination has assigned to your salesorder transaction type
you have to assigned following quotation determination to ur sales order transaction type
No Quotation Determination
E Only at Item Level: Assign Immediately if Unique
F Only at Item Level: Always With Selection Option
check Copying Control for Business Transactions
Hope it answers your Query
Thanks & Regards,
srikanth.naga -
URGENT:not all variables bound error
Hi
I am getting the following error while trying to run my MAAddTrnActPg.xml in the SSHR Module error in my VO. I have checked all the bind variable mappings still getting this error, pls suggest ASAP
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT lpm.LEARNING_PATH_MEMBER_ID,
lpm.NOTIFY_DAYS_BEFORE_TARGET,
lpm.BUSINESS_GROUP_ID,
lpme.LP_MEMBER_ENROLLMENT_ID,
lpme.MEMBER_STATUS_CODE,
lpme.COMPLETION_TARGET_DATE,
lpme.CREATOR_PERSON_ID,
tav.VERSION_NAME,
tav.END_DATE,
tav.START_DATE,
tav.ACTIVITY_VERSION_ID,
lpm.ACTIVITY_VERSION_ID AS ACTIVITY_VERSION_ID1,
decode(nvl(lpme.creator_person_id, -1), :1, 'Yes','No' ) update_switcher,
decode(nvl(lpme.creator_person_id, -1), :2, 'Yes','No' ) delete_switcher,
lpm.LEARNING_PATH_SECTION_ID
from
ota_learning_path_members lpm,
ota_lp_member_enrollments lpme,
ota_activity_versions tav
where
lpm.learning_path_section_id = :3
and lpme.learning_path_member_id = lpm.learning_path_member_id
and tav.activity_version_id = lpm.activity_version_id
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:865)
at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:988)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:211)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:707)
java.sql.SQLException: ORA-01008: not all variables boundMariah,
As you are using bind variables in the query itself, u should overide initQuery method in VOimpl class of VO.Like this
VOimpl class
=============
public void initQuery(String creator_person_id,String learning_path_section_id )
setWhereClauseParam(0,new oracle.jbo.domain.Number(Integer.parseInt(creator_person_id)));
setWhereClauseParam(1,new oracle.jbo.domain.Number(Integer.parseInt(creator_person_id)));
setWhereClauseParam(2,new oracle.jbo.domain.Number(Integer.parseInt(learning_path_section_id)));
executeQuery();
--Mukul -
Error occurring in SOLMAN Initial Configuration
I have installed Solution Manager 7.0 EHP-1 on a Windows 2003 64-bit server.
Using u201CClient =001u201D transaction SOLMAN_SETUP, I performing the Initial Configuration, During that time I got below errors.
Server Details :-
Server name = sapsolman
SYSID = SOM
Database = SQL
Error -1
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_FQDN
I resolve by myself by adding u201Cicm/host_name_full = sapsolman.cpt.comu201D in parameter end as well as with u201CC:\WINDOWS\system32\drivers\etc\hostsu201D , and proceeding further with Initial Configuration.
Error -2
When I am creating SOLMAN_ADMIN user I got below error
1- Business Partner 0000000101 successfully created for user SOLMAN_ADMIN
2- Role assignment to user SOLMAN_ADMIN Changed
3- User SOLMAN_ADMIN Sucessfully Created
4- u201C The selected templates do not contain any authorization data u201C <----- Error
Error -3
Next step in Initial Configuration returns the following error:
System SOM does not exist <----- Error
E::000 <----- Error
Kindly give solutions for Errors 2nd & 3rd ASAP.Hello,
FQDN referes to Fully Qualified Domain Name - and this would indicate the FQDN has not been set in RZ10
parameter icm/Host_name_full has not been equated to the fully qualified Domain name of the server.
Is SOM and SID of a System? Has it been declared in SMSY?
Seems you may have some IMG activities left to do in SPRO...have you configured your BC Sets? Have you enabled HTTP Services, etc, etc?
Regards,
Paul -
Local client copy error - Table "BKPF" not edited due to excessive number
Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
AbdulHi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh -
SQLCMD throwing error with multi-line queries
I get the error "Unclosed quotation mark after the character string..." when I pass multi-line queries to SQLCMD via a SQL Agent Job. For example, the following command fails:
SQLCMD -E -S MyServerName -Q "PRINT 'Hello';
PRINT 'World';" -b
SQLCMD seems to be only processing the first line, ignoring that there is more to the query. The actual error in this case is:
Msg 105, Level 15, State 1, Server MyServerName, Line 1
Unclosed quotation mark after the character string 'PRINT 'Hello';\n '.
Msg 102, Level 15, State 1, Server MyServerName, Line 1
Incorrect syntax near 'PRINT 'HELLO';\n'.
Where "\n" is actually an unprintable character for the line terminator.
What am I doing something wrong for passing multi-line statements to SQLCMD?Hi Brandon,
You can use sqlcmd to run a Transact-SQL script file. A Transact-SQL script file is a text file that can contain a combination of Transact-SQL statements, sqlcmd commands, and scripting variables.
To create a simple Transact-SQL script file by using Notepad and save the file as myScript.sql in the C drive.
To run the script file
1. Open a command prompt window.
2. In the Command Prompt window, type: sqlcmd -S myServer\instanceName -i C:\myScript.sql
3. Press ENTER.
TechNet
Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send
your feedback here.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread. -
Hi Experts,
Iam uploading data through LSMW for QP01 but in the second last step that is create batch input session its giving me this error "No profile with entry tool for task list / / / in session QP01" can anyone help to get rid of this error. pls reply ASAP.
Thanks in advance.
Abhishek Pandey.Hi,
Check below link, it may be useful.
Re: QM_LSMW BY RECORDING METHOD FOR QP01
Thanks,
Asit Purbey.
Maybe you are looking for
-
When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It do
-
Multiple Crypto Maps on Single Outside Interface
Hi, I had the following crypto map configured on my ASA5505 to allow Cisco IPSec VPN clients to connect from the outside: crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transfo
-
To everybody having problems with bootcamp and 23" cinema
I found that when you've heard the windows welcome sound, and your 23" screen is black - you can pull out the power cable wait a sec and put it back in. Then the screen will appear. Works for me , let me know...
-
Video Phone only works when specific user initiates connection
Hi, I have an application based on the Cirrus Video phone demo as presented here: http://labs.adobe.com/technologies/cirrus/samples/ In general, this works fine, but for one specific user with whom I test, I have the following issue: When I initate t
-
Create profit centre document T code - 1kel
Dear friends Could any one pl let me know the business scenario as to when we use "Create Profit Centre Document T code - 1kel? Thanks in advance and suitable points will be awarded. Regards Rishikesh