Error in RBDMIDOC report run in E-REC, for data transfer from HR to EREC system

Hi,
We are on EHP5, EREC 605, SP0007. EREC is on a standalone, separate instance. HR in a separate instance.
We have created new org.units & positions, which we are trying to move from HR to EREC system for starting the EREC process.
In the report message type, gave input "HRMD_ABA", The output throws this error. (Screenshot attached)
Please provide your helps on the reasons for the error and corrective action to be taken.
Regards,
ER.

Thank Nicole for the reply.
Just extending my query,
I have created newly 2 org.units & 2 positions under the org.units in HR system.I
If i want to create a requisition as a recruiter from EREC portal, for that newly created vacant positions, what needs to be done?
How to move that new vacant org.unit with position to EREC system ?
Should I run the org.unit with positions using PFAL (Insert/update mode) or use RBDMIDOC method ?
Look for inputs.
Regards,
ER.

Similar Messages

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

E-Rec: XI for data transfer

Hello Experts,
I am working on an implementation project where SAP E-Rec is on different box. We are on EhP5. We have XI for data transfer between both the systems (ECC and E-Rec). Now, when we use RFC to connect these systems, we use PA48 in ECC to hire candidates as employees which in turn pulls data from T752F table. Now as we are using XI, how/where does data flow?
Also, please guide in case candidate is a rehire, how and where to capture his previous perr number to validate candidate is actually an old employee? Instead of T752F, which table is populated which creates an entry in HR admin's UWL. Please help understand.
Thanks and regards,
E-Rec Beginner!

Hello,
Please have a look at the attachment of note 997181 where the HR integration process is explained.
Regards
Nicole

New Hire Data Transfer from E-Rec to ECC via PA48

Hi,
We have requirement where we need to use the basic new hire data transfer from erec to ecc using PA48.
Could someone help me by listing the step by step process that is required to configure in both EREC & ECC?
I know there is pdf document available online but that refers mostly to XI which we are not planning to use.
Please help.
Regards,
Vikram

Hi,
For integration between E-Rec and ECC, check [Link|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
This gives detailed information on synchronous and asynchronous data transfers between E-Rec and ECC.
Hope it helps!
Arpita

Error in Plan Data Transfer from CO

Hi,
I need to use Plan Data Transfer from CO (FM9C). But when I execute it, I have an error "CO Objects without FM Assgmt".
How can I setup the derivation between CO and FM objects?
All documentation that I've found are for SAP 4.6, but we are using SAP ECC 6.0...

Hi,
Are you using former budgeting or BCS? If you use BCS, you should use FMCYCOPI_CO. In any case, to link CO objects to FM entities, use FMDERIVE strategy - it works for planning in the same way as it does for real postings.
Regards,
Eli

Odd error when 6i report run from server but not from pc

Getting error:
REP-0065: Virtual Memory System error. REP-0200: Cannot allocate enough memory. cavaa 22
running a report from the web server via URL / cgicmd.dat file
report runs fine from developer tool, naturally
both windows boxes, server & pc
report has single ref cursor query from pacakged procedure returning 4 column record type, all defined in same package
order of columns all appear to be the same, datatypes too
ideas?

Another developer created a new function that my ref cursor query used.
It had an error, thereby causing the ref cursor to fail.... the report failed.
I think more error handlers are necessary.

Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Error in Data Transfer : From CO-PA to SOP Flexible Planning

Hi Friends
I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me..
The following configuration steps are done with Example;
Characteristic assignment
u2022 Sales Organization
u2022 Region
u2022 Plant
u2022 Material Number
u2022 Material Group
Key figure(s) assignment
u2022 Sales Quantity
Assignment: Information structure - operating concern
S555 u2013 Z001
Define activities Z1
Mass Processing Job : ZSO-PA
We are able to transfer data from CO-PA to standard SOP, But we tried for transfer to Flexible Planning SOP by creating Mass Processing Job setting as below configuration path.
Production -> Sales & Operations Planning (SOP) ->Functions -> Mass Processing -> Transfer LIS / CO-PA
After executing Job MC8G - Schedule, we checked in Tcode - MC8I u2013 Check, Status: Processed with errors, And also data are not displayed in Tcode : MC95 for Material & active version.
We couldnu2019t find log for error status.
What is the method / Procedure for transfer data to Flexible Planning SOP?
Please get back to me.

Dear,
Status:            Processed with errors ok
Activities checked:? what is the error message here like
   COPY
       Planning type in activity and job not identical
       Planning type of job: SOPKAPAM
       Plng. type of activity:Z004PLAN
When checking a mass processing job in SOP/flexible planning (Transaction MC8I), in the log error message "Activity and COPA profile have different planning versions?
Or planned/actual indicator in the COPA profile?
Version should be        A00
Please check the MC8S. Then an Avtivity in MC8T
after you create the job in MC8D with the acitivity you have defined for your info structure.
After that check in MD62 for plan value.
Regards,
R.Brahmankar

Report Designer odbc connection string for data source using a parameter

I am using stand alone report designer 3 for the present and have a question/problem regarding the odbc connection string for MySQL when setting up the data-source
I need to be able to enter a parameter which is the database name i.e. BOE-201401 or say BOE-201312 etc from a list of databases the user can choose from.
at present the odbc connection string points to BOE-201402
the connection string is at present Dsn=Development Server for MYsql;description=MYSQL;server=ldndw01;database=BOE-201402;port=3306
my parameter has the name BOE_DATABASE
and in an expression it is as such
=Parameters!BOE_DATABASE.Value
I want to point the datasource for the report to the parameter value before the user sees the report.

Hi Leslie,
Based on your description, we want to design a report with a dynamic DataSource connection string. There are the basic steps below for your reference:
Create report with static database.
Change data source to report parameter.
Send new database connection string as a report parameter.
More detail information, please refer to the following blog: Dynamic Database in SSRS 2008.
http://haseebmukhtar.wordpress.com/2011/11/09/dynamic-database-in-ssrs-2008/
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

Hi all,
Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
After creating an Integration model and while activating the same am getting the following error,
" System: SCMCLNT800 User: SMART03 06/17/2006 13:32:14
Function: /SAPAPO/CIF_LOC_INBOUND
Text:Error in address data for location DC2000/ECC800 "
Could anyone provide me how to fix this?.
Regards
Bharanidharan

Hi Veera,
Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
Regards
Bharanidharan

Get Report Error when schedule report run

No problem I know what it is.

Issue was related to the Console URL setting in the Grid Control Overview tab, it was set to http://<host>:<port>/em/console and should have been set to http://<host>:<port> instead.

Reports run in LAN but not in WAN from Oracle Application Server 10g R2

Hi,
I am using Microsoft(R) Windows(R) Server 2003, Standard Edition (Version 5.2.3790 Build 3790) & Oracle Application Server 10g Release 2 (10.1.2).
I run my forms and reports in Oracle Application Server 10g Release 2 (10.1.2) successfully in client server environment. But when I run my application in WAN (our private network between different cities) then forms are run successfully but reports does not run.
i am calling reports from Forms using following code.
PROCEDURE PRINT_REP_WEB IS
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT183');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\cheema\qdir_store\reports\pmms\backlog_jobtype.RDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_pap_10gasmid');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_pap_10gasmid') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_pap_10gasmid';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
when clients in WAN press the reports button from Form there is a message "Page can not be displayed" appear.
How can I run my reports in WAN, please suggest me solution.

This sounds like a configuration issue. Are there different firewall rules that are enforced on WAN connections versus LAN connections?
Hope this helps.
Craig...

Second s5 update has made wifi and data run simutaniously, being charged for data only way to turn off Data is to go to settings. I had same issue with my other phone. Recieved two replacement phones the SIM card did not work on replacements took phone ba

Wifi and Data running simultaneously. Data was being charged to my account even though I was on WIFI. No one can fix the issue. I have wasted 8 hours of my life and went and returned my phone and got a new one yet after the last update I now have WIFI and Data showing that they are running simultaneously. I have looked at numerous message boards and turned off Caller ID don't have Volte on my phone but do get an error with Visual Voice Mail. I don't want any of these services, you are not helping your customers Verizon or Samsung with forcing us to update. I tried not to update my NEW phone that I had to get from Costco because of this exact same stupid issue happen on my last one. But every time I said NO to update the next time I did anything on the phone the UPDATE would pop up again. I would say NO it would come back. I was doing a text and it came up and I hit update not wanting to and then my phone began updating on a low battery. I had to rush to put on charge and then my WIFI and Data came back on together with arrows on all going up and down. I HATE the lack of support I get from SAMSUNG and VERIZON... Verizon washes their hands and say these are not Updates even though these are the features we have on all our phones like Visual Voice Mail and Volte...

I did look at the Settings/Cellular to check the applications. This is one of the steps I did with the person from Verizon who was an "iPhone Specialist". And he didn't see anything unusual. And I can honestly tell you they have very minimal number of apps on their phones.
When I went to the Apple Store the first time with this problem, they had me update the phones iOS systems to see if this would correct the problem. They were each running older versions but different versions. One son had one update to do and the other had a couple of updates needed. So, the problem started before they were updated and they weren't even on the same update. And nothing changed after we did the updates.
I didn't reboot the router and modem, because I'm not having any other issues with my phone, my husband's phone, our iPad, xbox, PS3, or laptops. Would the wifi only affect their phones?

Error in RBDMIDOC report run in E-REC, for data transfer from HR to EREC system

Similar Messages

Maybe you are looking for