Error In Re-install Microsoft Exchange Server 2010

Hi
Ihad Installed Ms Exchange Server 2K10 and work correctly.
I Did somne mistake and I had to uninstall and re-install that
but when I try to install that there are many Errors Apears.
Mentioned : when I was uninstall exchnage I delete Every Thing In Active Directory Users and computers
Errors:-----------
Elapsed time: 00:00:27
Organization Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Warning:
Setup is going to prepare the organization for Exchange 2010 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2007 server roles.
Elapsed Time: 00:00:19
Languages Prerequisites
Completed
Elapsed Time: 00:00:01
Hub Transport Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Error:
Setup cannot continue because one or more SMTP/Send connectors have invalid settings: Couldn't find the Enterprise Organization container.
Client Access Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01
Mailbox Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01

check out is there any watermark key in the registry - A watermark in the registry identifies where Setup failed. You will not have to answer the Exchange 2010 Setup wizard questions again when you resume a failed Setup. You can resume the failed install,
and let it succeed.
A few article for more understanding
http://technet.microsoft.com/en-us/library/ff805039%28v=exchg.141%29.aspx
http://blogs.technet.com/b/exchange/archive/2007/05/21/3402900.aspx
Exchange Queries

Similar Messages

Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3.
what is the best way to do so?
my current env:
Name : xxxxxxxx
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, HubTransport
Site : domain/Configuration/Sites/xxx
Name : yyyyyyyy
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/yyy
Name : cccccccc
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/ccc
Name : dddddddd
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : ClientAccess
Site : domain/Configuration/Sites/ddd
Name : iiiiiiii
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/iii
thanks
Mayson

Consider referring to the articles below and that explains it all.
Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Customize the Response Message for Resource Scheduling - Sent by Microsoft Exchange Server 2010

We have a room mailbox and when one books it the organzier gets response with the following and the very botoom:
Sent by Microsoft Exchange Server 2010
I want to remove it as I dont want anybody to know what mail server we are running? thankx

Hi,
As what Andy says, it is by default and there is no method to remove it.
Sorry for any inconvenience.
Regards,
Winnie Liang
TechNet Community Support

Is there any Collector for Microsoft Exchange Server 2010?

Dears All,
Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
But our customer exchange version is exchange 2010, Is there any
Collector for Microsoft Exchange Server 2010? Thanks!
steve_zeng
steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
View this thread: https://forums.netiq.com/showthread.php?t=46984

steve_zeng;226167 Wrote:
> Dears All,
>
> Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
> But our customer exchange version is exchange 2010, Is there any
> Collector for Microsoft Exchange Server 2010? Thanks!
There's a pre-release build of the exchange collector available for
2010, just contact NTS.
If you need a full formal release, we're looking to have 2010 and 2013
support by approximately mid-year.
brandon.langley
brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
View this thread: https://forums.netiq.com/showthread.php?t=46984

Installing the connector for microsoft exchange server 2010

Hi All,
We have installed AD connector 9.1.1.7.0 with OIM 11.1.1.5.0.
Now Team is upgrading to Microsoft 2010 exchange server. As of now there is no direct provisioning for microsoft exchange server.
Now we are trying to install connector for microsoft exchange and do the provisioning.
So, what is the connector version should i use Microsoft 2010 exchange.
can i install 11.1.1.5.0.Any help would be appreciated.
Also please provide the minimum details which are required to connect to target exchange server or please suggest us some doc.
Thanks in Advance.

Hi Rajiv,
Thanks for the reply. Can you please tell which version of connector i have to download?
Thanks In Advance

Can I install the Exchange Server 2010 from my SBS2011 onto a sceond server, whilst still keeping the SBS2011 ?

Hi,
My customer currently has an HP Proliant ML350p G8 running SBS2011.
What they want to do is install the whole Exchange Server 2010 onto a second server which is running Server 2008 R2 Standard which is on the domain as an additional Domain Controller.
Is this possible ??
Many thanks
Alan Skinner

Running Exchange Server on a DC is supported. Here are some issues you can get:
http://support.microsoft.com/kb/940845
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Error while connecting to Microsoft Exchange server using javamail: "com.sun.mail.util.MailConnectException: Couldn't connect to host, port: host name , 993; timeout -1"

I am trying to read mails from my outlook microsoft exchange server. Following is the code:
public void readEmailsFromOutlook(/*String host, String username, String password*/ ) throws MessagingException, IOException {
      String host = "hostname";
      String username = "domain\\username";
      String password = "password"
      // Create empty properties
      Properties props = System.getProperties();
      props.setProperty("mail.smtp.auth","true");
      props.setProperty("mail.store.protocol","imaps");
      props.setProperty("mail.imap.auth.plain.disable","true");
      props.setProperty("mail.imap.host",host);
      props.setProperty("mail.imap.port","993");
      props.setProperty("mail.imap.user",username);
      props.setProperty("mail.imap.pwd",password);
      props.setProperty("mail.imap.debug","true");
      props.setProperty("mail.imap.ssl.protocols","SSL");
      props.setProperty("mail.imap.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
      props.setProperty("mail.imap.socketFactory.fallback", "false");
      props.setProperty("mail.imap.socketFactory.port", "993");
      // Get session
                 Session session = Session.getInstance(props, new ExchangeAuthenticator(username, password));
      session.setDebug(true);
      // Get the store
      Store store = session.getStore("imaps");
      //Store store = session.getStore();
      store.connect(host, username, password);
      // Get folder
      Folder folder = store.getFolder("INBOX");
      folder.open(Folder.READ_ONLY);
      BufferedReader reader = new BufferedReader(new InputStreamReader(
          System.in));
      // Get directory
      Message message[] = folder.getMessages();
      for (int i = 0, n = message.length; i < n; i++) {
        System.out.println(i + ": " + message[i].getFrom()[0] + "\t"
            + message[i].getSubject());
        System.out.println("Read message? [YES to read/QUIT to end]");
        String line = reader.readLine();
        if ("YES".equalsIgnoreCase(line)) {
          System.out.println(message[i].getContent());
        } else if ("QUIT".equalsIgnoreCase(line)) {
          break;
      // Close connection
      folder.close(false);
      store.close();
But it threw the following error:
DEBUG: setDebug: JavaMail version 1.5.1
DEBUG: getProvider() returning javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Oracle]
DEBUG IMAPS: mail.imap.fetchsize: 16384
DEBUG IMAPS: mail.imap.ignorebodystructuresize: false
DEBUG IMAPS: mail.imap.statuscachetimeout: 1000
DEBUG IMAPS: mail.imap.appendbuffersize: -1
DEBUG IMAPS: mail.imap.minidletime: 10
DEBUG IMAPS: trying to connect to host <hostname>,port 993, isSSL true
com.sun.mail.util.MailConnectException: Couldn't connect to host, port: 10.75.250.60, 993; timeout -1;
nested exception is:
java.net.ConnectException: Connection refused: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:693)
at javax.mail.Service.connect(Service.java:345)
at javax.mail.Service.connect(Service.java:226)
at com.capgemini.utilities.Utilities.readEmailsFromOutlook(Utilities.java:1261)
Whats wrong with my code?
Please help!!!!

You're using the "imaps" protocol, but you've set properties for the "imap" protocol. Change all the property names from mail.imap.* to mail.imaps.*.
Also, get rid of all the socket factory properties.
If you still can't connect, see these connection debugging tips.
Most likely you're using the wrong host name or port number. In almost all cases, it's better to just let JavaMail choose the correct port number.

Aggiornamento Microsoft Exchange Server 2010

Salve. Questa mattina verso le 7.00 ho lanciato gli aggiornamenti. Da allora è tutto fermo sull'aggiornamento kb2986475 "
Aggiornamento cumulativo 8 per Exchange Server 2010 Service Pack 3".
Poichè all'azienda serve urgentemente la posta, che posso fare? Non voglio bloccare l'aggiornamento. Ha stoppato tutti i servizi e aggiornato Dll. La mia domanda : è giusto che ci voglia tutto questo tempo?

Hi,
In order to resolve your problem more efficiently, I recommend you describe your question in English.
Best regards,
Belinda Ma
TechNet Community Support

Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

Dear all,
first of all thanks for reading this topic :-)
In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
We are using Outlook Anywhere, Active Sync and OWA.
Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
To install the mailbox role, I think this will not affect anything.
Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
Any help would be appreciated!
Jennie

Hi Jennie,
Below are the steps if you are not planning to upgrade.
1) Install new Exchange2010-SP3 Server all roles Please check
this
2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
this
3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
For OAB, Autodiscover, EWS please check steps 5,6,7in this
For setting OWA and ECP URLs please check
this.
4) Move few mailboxes as a test and check. If no errors move the rest.
5) Move your OAB generation server to the new server. Please check
this
6) Move you public folder contents to the new server you have. Please check
this
7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
8)
Add the new server as the source server and in the current send connector and remove the old server from the send connector.
Shutdown the server for a couple of days and monitor. So you will know if you missed something.
Uninstall Exchange2010 from the add remove programs.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

What is required to integrate Microsoft Exchange Server 2010 (On premise) to SharePoint O365?

The client has his AD and Exchange 2010 on premise and would like to integrate with Office 365 SharePoint.
I know it is possible to integrate SharePoint On premise to Exchange Online but how possible and what is required to create it in the opposite way while using AD and Exchange On Premise to SharePoint Office 365?
Thanks!

This is not possible. The only integration point for SharePoint Online is Exchange Online.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Microsoft Exchange Server 2010

I am testing the following scenario
I want to delete a specific email message from a user mailbox and from exchange Journal. I have done the following steps but not sure if I deleted the message completely
1. logged into the OWAl/ecp and used the discovery mailbox search
2. the search results are copied to the discovery mailbox, I found the message and deleted the message from the results and from the deleted the items of discovery mailbox.
3. I did the search again on the same user and found the same message again which I previously deleted, so this time I ran the following command in exchange shell which deleted the message
Search-Mailbox
-Identity
"<user>"
-SearchQuery
'Subject:"<subject_title>"'
-DeleteContent
4. used the discovery mailbox search again just to confirm and found the message again on the search results
5 ran the above shell command again and this the deleted message showed 0KB which means that it was already deleted.
My question is that by running the above shell command does it delete from user mailbox and from Journal as well? am I following the right steps to deleted a specific message? what is the recommended way of deleting when exchange is setup to Journal
all messages in cached exchange mode.
Thanks.

Hi Nawab,
You can use the Search-Mailbox cmdlet to search and delete messages from
a mailbox.
Hence you need to know the exact mailboxes containing the emails you want to delete.
If the mailbox from which you want to delete messages has single item recovery enabled or Litigation Hold enabled, then the deletion will not be permanent or might not work at all until you remove them.
Use Mailbox Search to Delete Messages
*You used Multi-Mailbox search or Discovery Search (Requires you special permission RBAC, even to full admins) to find the emails then decide upon deleting it.
This should already list email in journal mailboxes within exchange as well. Just take note of all the mailboxes having the email, disable single item recovery or hold on those mailboxes and delete it.
Create a Discovery Search
Using Multi-Mailbox Search, you can search a large volume of e-mail messages stored in mailboxes across one or more Exchange 2010 servers, and possibly in different locations.
NOTE:-You can’t search content of a disconnected mailbox.
If the mailbox has an enterprise CAL, you can use the Multi-Mailbox Search feature in the Exchange Control Panel (ECP) or the
New-MailboxSearch cmdlet in the Shell. These features also allow you to search multiple mailboxes simultaneously.
You can also use the Search-Mailbox cmdlet in the Shell to search for and recover missing items. If the mailbox has a standard CAL, this is the only method you can use. If you use this cmdlet, you can search only one mailbox at a time.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86).

How do I get around this error when installing AI? I have tried a mumber of things and nothings seems to work. It is in Windows 7

You need to provide exact system info, the install logs, your system's event viewer data for the relevant install and so on.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Mylenium

Setting up Exchange Server 2010

Anyone know of a thread that shows a good way to setup exchange 2010 to work well internally and externally?

Hi,
I recommend you install Exchange 2010 SP3 directly.
What's more, before you install Microsoft Exchange Server 2010 in your organization, you should prepare Active Directory and domains at first.
Here are some helpful articles for your reference.
Prepare Active Directory and Domains
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Install Exchange 2010 Using the Custom Installation Type
http://technet.microsoft.com/en-us/library/bb125143(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
Voon

Thank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

Error In Re-install Microsoft Exchange Server 2010

Similar Messages

Maybe you are looking for