Error in reader 9.3.4

Hi Everyone.
Please be advised that I am not looking for a work around (since we do not feel like telling our 8000 clients to change their manuals and what not)
It seems that in adobe reader 9.3.4, when creating a PDF with links to microsoft office extensions (doc xls etc...) that are located on network or physical drives, creates an error message, which is cannot be replicated in prior versions of reader. (tested 9.3.0 - 9.3.1 - 9.3.2 - 9.3.3)
The error message is as follows.
windows cannot find Document.xls' Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click search.
PDF was created with adobe acrobat 9.X .
I will also mention that the document I created to test what I have seen on our clients machine is on a network drive accessible to all 8000 end users and that it was not a shared PDF that I created, i sent it off to individuals to test.
If anyone can confirm this issue or confirm that adobe knows and is working on it, it would be grand. Even better is their is a way to fix this without changing our way of doing things.
Merci!
Fred B
[signature deleted by host]

Yes - Reader 9.4.0 has corrected the failure to open external files from a PDF, in our case to open SWFs.
What a pity there appears to have been no acknowledgement from Adobe during the period we have all been reporting this bug.
If they had simply said "Yes, we know there is a widespread problem and we are working on it" or, if they needed more information in order to isolate the bug or discover its extent, they could have asked contributors to answer specific questions to this end.
This failure to communicate has caused a lot of resentment against Adobe, with threats to switch to third-party solutions.
Let's hope there are no other issues lurking in this new release.
skippermq
www.nauticalsoftware.com

Similar Messages

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.

Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server.   The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2                                .
Source                                          Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4          calling dbdd_dbtab [dbdynpdb     2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details     Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026    Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system.   In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
Pat

The 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399   dbs_db4_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399   default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$                               Directory:    /usr/sap/TEH/EHPI/abap/log
Name:         DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno      15
sid        TEH
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    100
intno      20020600
make       single threaded, ASCII, 64 bit, optimized
profile    /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid        75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c   1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15                             <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory:    /usr/sap/TEH/EHPI/abap/log
Name:         DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c   12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15                             <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    92
intno      20020600
make       multithreaded, ASCII, 64 bit, optimized
pid        75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01]   1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c     1758]
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    96
intno      20020600
make       single threaded, ASCII, 64 bit, optimized
pid        75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

RH 8: Error: Cannot Read RHFrameStyleMappings.apj

We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open. Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj" and once again I copied it over from another file. I tried opening it again and it worked. I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed. Thanks!

Is that not the same problem as running in this thread?
http://forums.adobe.com/message/2311195#2311195
See www.grainge.org for RoboHelp and Authoring tips

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Error Message reads: unable to load

Error Message Reads
Resource Not Found
Unable to Load
Sync UI Core
Localized.dll
This is on a Windows operating system
I was trying to burn some Itune content to CD's
Now I have this error message
Is anyone familiar with this message?
Thank you

Even though the following user tip is about iTunes install issues and launch issues, I think it's also worth a try with your error message too:
Troubleshooting issues with iTunes for Windows updates

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Can not launch lightroom says error when reading its preview cache

I can not launch Lightroom is puts up a error message that says it encountered an error when reading its preview cache and goes in to a loop that keeps closing the program
I have restarted my comp 4 times same this each time
I can't find any trouble shooting and when I try and download lightroom again it just puts me back at the creative cloud desktop which I can't click in anything

You need to delete the preview cache. LR will automatically create new previews.
Read here and here are the locations. Don't touch the *.lrcat file.

Lightroom encountered and error when reading from it preview cache and needs to quit

A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!

Search the forum, this has been answered many times.

Lightroom encountered an error when reading it's preview cache

I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).

The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences.   Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a   LR catalog folder called--->   C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata   (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it.

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches."

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches." It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

Error in reader 9.3.4

Similar Messages

Maybe you are looking for