Error in reading data of Virtual Infoprovider 0TCT_VC01

Hi Experts,
I have created a query on Statistics Multiprovider 0TCT_MC01. However, when I am trying to run the query, it gives following error message and does not display data but gives dump:
- Messages for Datasource 0TCT_DS01 from source system
- Syntex error: System error in program CL_RSTCT_BIRS_OLAP_AGGR_EX
- Error Reading the data of Infoprovider 0TCT_VC01
Kindly suggest what could be the issue and the solution for the same.
Thanks & Regards,
Himanshu

hi,
You can try running the query in RSRT also check the below thread
"Is This The Party To Whom I Am Speaking?
Thanks,

Similar Messages

Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12

Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.

Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

Activating DemoContent: Error when reading data target

I'm trying to activate the SAP Demo cube Purchasing Data (0D_PU_C01). The Grouping Mode is set to In Dataflow Before and Afterwards.
When I simulate installation, I get the error message Error when reading data target 0D_PU_C01 (Message no. RSAU126) in the logs (although in the Collection Area the Simulation Result column is marked with a green check).
I could find only 2 notes related to this error in the SAP Service Marketplace. SAP note nr. 540873 is about the BW indexing job. Note nr. 587796 (Error in after import of update rules) seams more appropriate, however not thoroughly right. In fact it refers to BW 3.1 Content or BW 3.0B.
My system version instead is:
BI_CONT 353
SAP_BW 350
The very same problem occurs when I try to activate the SAP Demo Sales and Distribution.
Any suggestion?
Thanks, Davide

Ok, it worked! Now however I have some more doubts.
1. I can't find the InfoObjects (e.g. 0D_GR_QTY, 0D_PLANT, 0D_MATERIAL, etc.) anywhere in Modeling -> InfoObjects, even if:
a) I can find them under the InfoSource tree of the SAP Demo Application Component
b) they appear activated in Business Content
What's going on?
2. The newly activated Purchasing Data cube has been added to the Unassigned Nodes InfoArea, and not to a newly created SAP Demo Purchasing (0D_MMPUR) InfoArea, similarly to the structure I saw when collecting the InfoProvider in Business Content. Is this the normal behaviour?
3. No DataSource has been assigned to any of the InfoSources. I read at:
http://help.sap.com/saphelp_erp2004/helpdata/en/43/57df37463a126ae10000009b38f842/content.htm
that the SAP Demo Source System will be used. What I can't understand is if I need to manually create and select this Source System. I thought it would be automatically created and assigned during the Business Content's cube activation. This is not the case. What steps would I have needed to perform?
Davide

JavaConsole Error: Problem reading data from server

HI All
We are getting this error on java console on a page:
Error: Problem reading data from Server - Java.Security.AccessControlException:access denied (java.util.PropertyPermission http.strictpostredirect Read)
In this page we are not firing a SQL Query of huge data.
Any suggestions on this why it is happening?
Thanks
Manisha

Manisha,
I think JVM(Java Virtual Machine) is trying to access something at network level and it cant able to find it.Or any new patches of java is installed.
Or may be due to IIS or Applet,Don't know exactly.
You can find some answers in below links:
http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessControlException.html
http://www.webdeveloper.com/forum/archive/index.php/t-46358.html
-Suresh

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error when reading data from socket

Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?

Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit

Error in reading data from InfoSet

Hi Experts,
I am facing the below errros when doing a selection to retraive data.
@5C\QError@ Error when reading data from InfoSet Z40_2 (return code 1) @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 1 E /BA1/F3_BASIS 6 1 1
@5C\QError@ Data transfer structures in EWLS object do not match @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 2 E /BA1/F3_EWLS 117 1 2
Please let us know if any one knows why tehse erros apear and sloution for these.
Please do the needful,'
Thanks,'Mahesh

thanks

Error in reading data from planning book

Hi Guys,
I am facing error in reading data from SNP planning book .
When i try to read single product data for simulation version , it gets loaded correctly.
However, when i try loading data for more than one product, then i get error "Product does not exist".
I checked all products are assigned to model-version.
I tried running consistency check as well and after it finished got message as "All inconsistencies can not be corrected".
Please let me know if any one had faced this error.
Thanks.

Hi,
Consistency check should solve the problem in this case. Try running it specifically on the version you are using. It should work.
Regards,
Guru Charan.

Error reading data of virtual provider.

Hi,
I am receiving the below error message when reporting on a virtual provider/remote cube and unable to identify the root cause. Same error message is displayed when trying to view content of virtual provider/remote cube via listcube T-code or report created directly on remote cube or report created on a multiprovider which has this virtual provider.
Error Message:
An exception has occured
Error in substep
Error in substep
Error reading the data of Infoprovider
Thanks and Regards
Vikram Reddy

Hi Vishwa,
The extraction checker on the data source in RSA3 in R3 is fine. Can you please ellobrate on how to check if the custom view on the table GLPCA is active or not.
Just to clarify, below steps have a been successfully carried in R3 and BW:
1. R3- Creation of view on table GLPCA
2. R3- Creation of reconciliation direct access data source based on this view
3. BW- Replication of this data source in BW and activation of data source.
4. BW- Linked the virtual provider with the data source through transformation and created and activated a DTP process.
5. BW- Context menu of the virtual provider and clicked on activate direct access and save the selection.
After all these steps when i try reading data through the virtual provider, i the recieve the error msg.
Thanks and Regards
Vikram Reddy

Error in Reading data from a xml file in ESB

Hi,
i created a inbound file adapter service which reads data from a xml file and passes it to the routing service and from there updates to the database.....
(everything created in jdeveloper)
But i am getting error....it is not getting updated to the database...when i check the database(select * from table) its showing one row selected but i couldnt find the data....
Transformation mapping also i did...
i think may be some error in reading the data from the xml file but not so sure.....
please reply to this mail as soon as possible its very urgent

Michael R wrote:
The target table will be created when you execute the interface, if you set the option on the flow tab as instructed in step #6 of the "Setting up ODI Constraint on CLIENT Datastore" Section.
Option Value
CREATE_TARG_TABLE trueHi Michel,
This was not my required answer.I am sorry that I was unable to clarify my question.Actually
+This project executed successfully with some warning.Target Table is automatically created in database and also populated with data.But when I right-click Target Datastore(in >Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table.I get some error like this:-...+This above line is the result of my project my problem is
when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that already inserted in the target table.Is not shown by the view data operation.
I meant to say I am facing this error
At the10(1010 written) step of
Creating a New ODI Interface to Perform XML File to RDBMS Table Transformation
wehre it says
Open the Interface tab. Select Mapping tab, right-click Target Datastore - CLIENT, and then select Data. View Data inserted in the target table. Close Data Editor. Close the tabs...
In my case when I use my sqldeveloper I can see data successfully inserted in my target table and also in error table (data that can't satisfy the constraint) .But I was unable to check this by following the above mentioned 10 th step and got this error.
Thanks

Port overrun error while reading data in queue

I am trying to read data from various wireless sensors(5-6 in number) which are communicating with my PC using rs232 port.
the size of data from each sensor that i am getting is 39 bytes.
I want to extract some bytes of these data for which i am using a string subset function.
Now the issue is due to the high baud rate i am not able to read data from each of them individually because before one set of data is worked on another set arrives and port overrun error occurs.
I am trying to do this using queue but could not find a possible solution.

This shouldn't be a difficult problem, as serial communication is "slow" (compared to the speed of the CPU). You want to take advantage of LabVIEW's parallel nature and have each of your Serial devices running in parallel, taking 39 bytes of data and passing it to an "Extract useful information" subVI. Note that you can use the same subVI for each of the 6 lines, and the time it takes to "extract the useful information" (by doing some string parsing) should take no more than a few microseconds, so it can easily be "shared" by all of your serial devices. Alternatively, you could make this VI reentrant, so a separate and independent copy would be assigned to each device, again allowing parallel operation.
If you are still having problems, post some code.

Error while reading data from backend system.

Hi all,
 When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
 14 PA0105 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
 988 PA0105 FETCH 1 1403
 14 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 665 PA0001 FETCH 1 1403
 17 PA0000 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 615 PA0000 FETCH 1 1403
 25 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 896 PA0001 FETCH 1 1403
 16 PA0002 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
 783 PA0002 FETCH 1 1403
 13.178 ? Server 1 0 EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
Phanikumar

Looks like authorization issue. Could you confirm whether proper authorizations have given to this user?
Also, run the application again get an error and then go to Transaction ST22 and see if there is any system dump for this user.
Regards,
Nitin

Gurus..need help in reading data from virtual infocube

Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
sam

Check out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP

Error when reading data in to ArrayCollection using HTTPService

Hi,
I am trying to read data in to ArrayCollection using HTTPService result property:
[Bindable] private var myData:ArrayCollection=new ArrayCollection();
 private function result_handler(e:ResultEvent):void
 myData = e.result.root.contact;
<mx:HTTPService id="post_submit"
 url="test.php"
 method="POST"
 result="result_handler(event)"
 fault="fault_handler(event)">
 <mx:request xmlns="">
 </mx:request>
 </mx:HTTPService>
I am getting the following error when there is no "contact" record in the xml root:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Also I am getting the following error when there is only ONE "contact" record in the xml root:
TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@280c9ca1 to mx.collections.ArrayCollection.
And it works fine when there is two or more "contact" records in the xml root.
Am I missing something?
Thanks

I am getting the following error when there is no "contact" record in the xml root:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
 You'll be getting this error because it's trying to access nodes that don't exist;
 there are no 'contact' records, thus when it tries to access node 'root.contact', it doesn't exist, hence it's receiving NULL when it's expecting something
Also I am getting the following error when there is only ONE "contact" record in the xml root:TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@280c9ca1 to mx.collections.ArrayCollection.
And it works fine when there is two or more "contact" records in the xml root.
Am I missing something?
Thanks
 When there is only 1 value, it'll be returned as an object (Arrays are used for multiple items). So it throws an error as it isn't expecting a single object, it wants an Array.
 This is also why when it returns 2+ records, there is no error. Multiple results will be returned as an Array, what your flex app was expecting.
 My initial guess to solve the first problem would be similar to Greg's, although i'm guessing you'd want;
 if(e.result != null){
 instead of
 if(e.result.root.contact != null){
 as you'd initially want to check if anything was returned in the result, rather than checking to see if a certain node exists.
 If you attempt to see if a certain node isn't null, and the node doesn't exist, it'll probably throw another #1009
 For the #1034 error, you'll have to check to see how many results were returned, as Madhav has described for you.

Error in reading data of Virtual Infoprovider 0TCT_VC01

Similar Messages

Maybe you are looking for