Error in reading socket

hi all,
I have a connection with a socket and I get the response of my request but sometimes i read some garbage data in the response like *"GCJ#���6JR��a)P)��$~G�a);)��$3���Q}�GXJR�g���~�X=��QJ�����J%�l{�����Q~o"*
this garbage data included in the response (not all the response garbage but only this portion)
and not only in each response.
plz help

Either your reading code is wrong or the peer is sending that data.

Similar Messages

  • Error when reading data from socket

    Hi,
    I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API  'mo_core_service->invoke_matching'.
    And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
    Can anybody help me in correcting this?

    Hi Narasa,
    The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
    Problem in ABAP API - NiRawReadError: error when reading data from socket
    Rgds
    Ankit

  • EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.

    Hi Everyone,
    I am dead in the water with my test install of EhP5 using the most current installer.  This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis  23 and Applications at 19.
    The install stops at Start Shadow First, but the instance and work processes are up on the server.   The log- SAPehpiConsole reads:
    Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
    Last error code set: RFC call to upg_is_shadow_system failed with key
    RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
    Please refer to these logs in the posted replys following this post for readability.
    The shadow system work process wp01 log showsan RFC error as follows:
    Wed Sep 14 11:29:58 2011
    ABAP Program SAPMSSY2                                .
    Source                                          Line 0.
    Error Code DYNPRO_READ_FAILED.
    Module  $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
    Function dy_dbread Line 100.
    RABAX: level LEV_RX_STDERR completed.
    RABAX: level LEV_RX_RFC_ERROR entered.
    RABAX: level LEV_RX_RFC_ERROR completed.
    RABAX: level LEV_RX_RFC_CLOSE entered.
    RABAX: level LEV_RX_RFC_CLOSE completed.
    RABAX: level LEV_RX_ERROR_SAVE entered.
    RABAX: level LEV_RX_ERROR_SAVE completed.
    RABAX: level LEV_RX_ERROR_TPDA entered.
    RABAX: level LEV_RX_ERROR_TPDA completed.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    RABAX: level LEV_RX_END entered.
    RABAX: level LEV_RX_END completed.
    RABAX: end no http/smtp
    RABAX: end RX_BTCHLOG RX_VBLOG
    Error while reading a dynpro.
    C Wed Sep 14 11:33:59 2011
    C  *** ERROR => SQL-Error -204 in function db_open  (dbsldb4.cpp  10630)
    C  {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
    RABAX: level LEV_RX_IMC_ERROR entered.
    RABAX: level LEV_RX_IMC_ERROR completed.
    RABAX: level LEV_RX_DATASET_CLOSE entered.
    RABAX: level LEV_RX_DATASET_CLOSE completed.
    C  Reopen: FALSE
    B  *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
    dbdynpdb2.c  2506]
    B  {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
    B  ***LOG BZY=> unexpected return code 4          calling dbdd_dbtab [dbdynpdb     2508]
    So I have a problem communicating with the shadow. Or is it a problem with the db_open?
    From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
    Error Details     Error while reading a dynpro.
    And trying to logon to the client sends the same message, it does not bring up the login screen.
    OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026    Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system.   In the month that I have been trying to do this,  SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
    Any comments or suggestions would be greatly appreciated.
    Pat

    The 2 logs from the installer are here.
    The STARTSFI is as follows:
    1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '14', GwService = 'sapgw14'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_db4_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '15', GwService = 'sapgw15'
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
    2 ETQ231 RFC Login failed
    repeats the rfc call with a fail until this final entry.
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
      The DEVTRACE.LOG is here:
    $                               Directory:    /usr/sap/TEH/EHPI/abap/log
    Name:         DEVTRACE.LOG
    trc file: "dev_disp.new", trc level: 1, release: "720"
    sysno      15
    sid        TEH
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    100
    intno      20020600
    make       single threaded, ASCII, 64 bit, optimized
    profile    /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
    pid        75851
    kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
    length of sys_adm_ext is 376 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c   1287]
    #shared lib "dw_xml.so" version 100 successfully loaded
    #shared lib "dw_xtc.so" version 100 successfully loaded
    #shared lib "dw_stl.so" version 100 successfully loaded
    #shared lib "dw_gui.so" version 100 successfully loaded
    #shared lib "dw_mdm.so" version 100 successfully loaded
    #shared lib "dw_rndrt.so" version 100 successfully loaded
    #shared lib "dw_abp.so" version 100 successfully loaded
    #shared lib "dw_sym.so" version 100 successfully loaded
    #shared lib "dw_aci.so" version 100 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    rdisp/dynamic_wp_check : 0
    rdisp/calculateLoadAverage : 1
    Tue Sep 13 14:48:58 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6404]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >omni_TEH_15                             <
    DpShMCreate: sizeof(wp_adm)##17440#(1744)
    DpShMCreate: sizeof(tm_adm)##4976768#(24760)
    DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
    DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
    DpShMCreate: sizeof(comm_adm)##576064#(1136)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)##0#(104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)##0#(80)
    DpShMCreate: sizeof(vmc_adm)##0#(1856)
    DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)#48
    DpShMCreate: sizeof(j2ee_adm)#2032
    DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
    DpShMCreate: allocated sys_adm at 700000050000010
    DpShMCreate: allocated wp_adm_list at 700000050002970
    DpShMCreate: allocated wp_adm at 700000050002b60
    DpShMCreate: allocated tm_adm_list at 700000050006f90
    DpShMCreate: allocated tm_adm at 700000050006fe0
    DpShMCreate: allocated wp_ca_adm at 7000000504c6070
    DpShMCreate: allocated appc_ca_adm at 7000000504d3b40       
    Directory:    /usr/sap/TEH/EHPI/abap/log
    Name:         DEVTRACE.LOG
    DpShMCreate: allocated comm_adm at 7000000504e1610
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 70000005056e060
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 70000005056e110
    DpShMCreate: allocated j2ee_adm at 70000005056e150
    DpShMCreate: allocated ca_info at 70000005056e950
    DpShMCreate: allocated wall_adm at 70000005056e9d0
    DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
    DpSysAdmIntInit: initialize sys_adm
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
    dia token check not active (3 token)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    EsStdUnamFileMapInit: ES base = 0x7000000a0000000
    EsStdInit: Extended Memory 4096 MB allocated
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    Tue Sep 13 14:48:59 2011
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   13097]
    Tue Sep 13 14:49:02 2011
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c   12339]
    MBUF state LOADING
    DpStartStopMsg: send start message (myname is >omni_TEH_15                             <)
    DpStartStopMsg: start msg sent
    Tue Sep 13 14:49:11 2011
    CCMS uses Shared Memory Key 73 for monitoring.
    CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Sep 13 14:49:13 2011
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
    MBUF state ACTIVE
    DpWpBlksLow: max wp blocks in queue is 800 (80 %)
    MBUF component UP
    DpMsgProcess: 1 server in MBUF
    DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
    Tue Sep 13 14:50:24 2011
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms.new", trc level: 1, release: "720"
    [Thr 01] Tue Sep 13 14:48:39 2011
    [Thr 01] MsSOsPrivInit: Run priority adjusted to 12
    [Thr 01] ms/http_max_clients = 500 -> 500
    [Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    92
    intno      20020600
    make       multithreaded, ASCII, 64 bit, optimized
    pid        75850
    [Thr 01] Tue Sep 13 14:48:40 2011
    [Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
    [Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
    [Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
    [Thr 01] MsGetOwnIpAddr: my host addresses are :
    [Thr 01]   1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
    [Thr 01]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
    [Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
    [Thr 01] HTTP logging is switch off
    [Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
    [Thr 01] *** I listen to port 3615 (3615) ***
    [Thr 01] CUSTOMER KEY: >H1357713078<
    [Thr 01] build version=720.2011.05.04
    trc file: "dev_rd", trc level: 1, release: "720"
    Tue Sep 13 14:49:07 2011
    ***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c     1758]
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    96
    intno      20020600
    make       single threaded, ASCII, 64 bit, optimized
    pid        75855
    gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
    gateway (version=720.2011.04.20)
    Tue Sep 13 14:49:10 2011
    gw/reg_no_conn_info = 1
    gw/local_addr : 0.0.0.0
    gw/reg_no_conn_info = 1
    SWITCH TRC-RESOLUTION from 1 TO 1
    CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
    CCMS uses Shared Memory Key 73 for monitoring.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Sep 13 14:49:13 2011
    CCMS: Initalized shared memory of size 40000000 for monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: AlMsUpload called by wp 1002.
    CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
    Bind service sapgw15 (socket) to port 3315
    GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
    GwPrintMyHostAddr: my host addresses are :
      1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
      2 : [127.0.0.1] LOOPBACK (LOCALHOST)
    Full qualified hostname = omni.plastekgroup.com
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpIPCInit2: read dp-profile-values from sys_adm_ext
    DpShMCreate: sizeof(wp_adm)##17440#(1744)
    DpShMCreate: sizeof(tm_adm)##4976768#(24760)
    DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
    DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
    DpShMCreate: sizeof(comm_adm)##576064#(1136)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)##0#(104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)##0#(80)
    DpShMCreate: sizeof(vmc_adm)##0#(1856)
    DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)#48
    DpShMCreate: sizeof(j2ee_adm)#2032
    DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
    DpShMCreate: allocated sys_adm at 700000060000010
    DpShMCreate: allocated wp_adm_list at 700000060002970
    DpShMCreate: allocated wp_adm at 700000060002b60
    DpShMCreate: allocated tm_adm_list at 700000060006f90
    DpShMCreate: allocated tm_adm at 700000060006fe0
    DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
    DpShMCreate: allocated comm_adm at 7000000604e1610
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 70000006056e060
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 70000006056e110
    DpShMCreate: allocated j2ee_adm at 70000006056e150
    DpShMCreate: allocated ca_info at 70000006056e950
    DpCommAttachTable: attached comm table (header=7000000604e1
    MtxInit: -2 0 0
    DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
    Tue Sep 13 14:50:14 2011
    GwDpInit: attached to gw_adm at 70000006056e110
    Tue Sep 13 14:50:16 2011
    DpSetProcessPriority: Run priority for gwrd adjusted to 12

  • CLI0615E  Error receiving from socket, server is not responding.

    We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
    connection pool and running on iPlanet.
    We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
    I read something about "stale connections". Does anyone know how to check to see if this is a problem?
    When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
    The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
    Any suggestions would be greatly appreciated.
    Thanks.
    [29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
         at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
         at bom.Bom.getDefs(Bom.java(Compiled Code))
         at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
         at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

    hi,
    lemme try to tell u what i thinkk..i dont think its' a solution
    Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
    But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
    contact them and they may provide and explanation..
    wishes,
    Jer

  • Error in Establishing socket !

    Hi
    i read the all previous forum related to this
    Problem "Error in establishing socket "
    i done all operations in that forum issue
    i have SQL2000 , & drivers connected with one SQL 2000
    server but when i try to connect it on diff machine then
    it throws the Exception "Error in establishing socket "
    can any one help me .
    thanx in advance .

    The possible reasons I could think of:
    1. The server is not running.
    2. The server is running but TCP/IP is not enabled [you need to select TCP/IP in Enabled Protocols]. You could run netstat to check.
    3. You have a firewall which is prevent the connection from being established.

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Error while reading the PO in the Backend system. Inform system admin

    Hi All,
    We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
    The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
    No error messages or logs in RZ20, SLG1 any where.
    All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
    Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
    It was working fine till a week ago and suddenly this problem is coming.
    We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
    Now this issue is coming up in test system where as development system is working fine.
    Please let us know where to look and how to resolve this issue.
    A quick response would be highly appreciated.
    Regards,
    Teja

    I am facing the same issue with one PO in the Production system.
    SRM 5.0 , R/3 4.6C Extended classic scenario.
    I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
    Error while reading the PO in the Backend system. Inform system admin.
    Message no. BBP_CF010
    I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
    I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
    In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
    Any inputs would be greatly appreciated. Please throw some light on this issue.
    Krishna

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close.  Sorry for the convenience."  When I click to see the error, it reads "AppName: itunes.exe      AppVer: 10.5.2.11      ModName: msvcr80.dll"  Why ?

      When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close.  Sorry for the convenience."  When I click to see the error, it reads "AppName: itunes.exe  AppVer: 10.5.2.11  ModName: msvcr80.dll"  Why ?  I am overly frustrated.  Please help.  Not exactly sure which operating system I have.  It is a dell laptop with xp.
    AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
    ModVer: 8.0.50727.6195 Offset: 00026b72
       AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
    ModVer: 8.0.50727.6195 Offset: 00026b72

    Well I was able to successfully revert back to iTunes8. Here's my steps:
    1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
    2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
    3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
    4. I then rebooted my PC
    5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
    6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
    It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

  • RH 8: Error: Cannot Read RHFrameStyleMappings.apj

    We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open.  Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj"  and once again I copied it over from another file.  I tried opening it again and it worked.  I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed.  Thanks!

    Is that not the same problem as running in this thread?
    http://forums.adobe.com/message/2311195#2311195
    See www.grainge.org for RoboHelp and Authoring tips

  • Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Unistall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Uninstall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

  • Error Message reads: unable to load

    Error Message Reads
    Resource Not Found
    Unable to Load
    Sync UI Core
    Localized.dll
    This is on a Windows operating system
    I was trying to burn some Itune content to CD's
    Now I have this error message
    Is anyone familiar with this message?
    Thank you

    Even though the following user tip is about iTunes install issues and launch issues, I think it's also worth a try with your error message too:
    Troubleshooting issues with iTunes for Windows updates

  • I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

    I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

    This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
    I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked  OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Maybe you are looking for

  • Basic system struggling with Standard Def MPG files

    We built two news editors about 6 months ago and needed to build both computers for $1200.  These were replacing two old Avid Newscutter XP systems from 2004... Because we were shooting DVCAM on DSR-250 camera's or to .mov/.avi DV files on nNovia QC

  • System status and user status Priority

    Hi All, We have system status and user status for the production order, I would like to know which has higher priority. E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then

  • With windows 7, when I print with "draft" the verticle printing is squiggly. Why?

    My hp psc 1210 all-in-one is giving me a few problems since I attached it to my new computer whose operating system is Windows 7 64-bit.   It prints fine with my accounting program, but when I try to use any desktop publishing program and print with

  • Is it possible to request CD/DVD discs from Toshiba?

    I would prefer manufacturers' disks to the recovery disks that I have already made.

  • Bypassing proxy settings does not work

    I can't manage to get my Mac to bypass the proxy settings. My bypass settings are: *.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.0/24 With these settings if I try to access 172.16.6.120, the server does not respond. However