Error in reading table TE417(during print preview)

Hi,
We have developed the solution to adjust the legacy invoics which has been created long back before the data will get migrated into SAP or before the Contract Move-In.We are able to create the billing document for the exactly same old legacy billing period but the posting date is the current date.
But, now above error is appearing while the print preview of invoice(print document) of the billing number for billing period before the move in or data migration date.
Is it because the billing prieod is old?
Immed help or solution will be highly appreciate.
Regards,
Sanju

Hi Nick,
there is No table with the name TE417 that is the reason it is giving error.
check your code once..
regards
vijay

Similar Messages

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

IDOC RBDMIDOC - Internal error: Program read table idoc_structure

Hi,
We have scheduled background program RBDMIDOC for master data thru change pointers.
This was running successfully for years. Suddenly since past few days the error is coming as below :
Internal error: Program read table idoc_structure, command data_select_for_block, argument Z******
I had searched SDN forum and in all post its suggested that - set P_CIMTYP = 'Z******'. This is have done but still error persists.
Any other solution.
Thanks

Plz check if there is any lock in Tcode SM12 and any job is failed/Active in SM37.
-Gouri

Error in reading table TFK056A with interest key

While posting interest I am getting the following error "Error in reading table TFK056A with interest key". I have configured my interest keys well. Please assist.

Hi Panashesean,
The reason for this error could be you have in the line items an interest key (ikey) which is missing in table TFK056A. Though you have a different interest key in the master record the system will consider the line item first.
Interest Key Documentation states:
"If more than one interest key is defined for a line item, these interest keys are normally prioritized as follows:
1. Interest key in line item
2. Interest key that is defined for transactions identified as additional receivables
An interest can depend on the operative company code in the rule for
additional receivables.
3. Interest key in dunning level
4. Interest key in contract account master record"
You need to remove the interest key in the line item for the system to use the master record ikey OR or define (ikey) in table TFK056A.
I hope this works.
regards,
David

Error in reading table V_EGER

Hi
I am trying to remove an device both Billing related Removal EG35 and Full Removal EG32 after selecting the device and click on Process list, the system is popping an error: Error in reading table V_EGER and not letting me to remove. The customer was moved out and final billing was also completed. When I checked the device status IQ03 it is showing "ESTO INST".
Please help me out what needs to be done to resolve.
Thanks

Hi Prasad,
Please take a look at the records in the table EGERR for your device. If possible please provide the time slice information from this table to further assist you.
If you have debug access, put a breakpoint in the FM ISU_DB_EGERR_SELECT_LOGIKNR and debug why you are having this issue when you execute the removal tcode.
Hope this helps
Thanks,
Sai

Regarding error "Field symbol is not assigned." during print preview

Hi experts,
    I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
Date and Time          29.09.2009 19:30:39
Short dump has not been completely stored (too big)
Short text
     Field symbol is not assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A field symbol that was not assigned was accessed
     (data segment no. 32769).
    The field symbol is no longer assigned because there was an attempt
    makde previously in a Unicode program to set the field symbol using
    ASSIGN with offset and/or length specification. Here, the memory
    addressed by the offset/length specification was not within the
    allowed area.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED_RANGE" " "
    "SAPLSTXC" or "LSTXCFFT"
    "FT_COMPOSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
   2. Corresponding system log
      Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
   3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that or Is there any configuration issue related to this?
Please provide solution for thsi as soon as possible.
Thanks and Regards
Subbu

A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

RFC-Error while reading table TFMCA003

Hello,
we have a running system with campus management an I'm doing the customizing for a separate system SLCM with EHP3. I created a RFC-Connection as in the Base IMG Configuration Settings for Pre-Configured SAP Student Lifecycle Management (ERP 6 - EHP 3) 31 October 2007 page 8+9 described.
On the old system it works without problems but on EHP3 I get the following error displayed while creating new students: Error - check RFC-Destination RFC_FICA_ACCT_CREATE
Looking into the rfc trace I read the following entry:
Trace file opened at 20090407 135656 W. Europe Daylight Time, SAP-REL 700,0,185 RFC-VER nU 3 1025200 MT-SL
======> Fehler beim Lesen in der Tabelle TFMCA003
ABAP Programm: SAPLHRPIQ00STUDENT_ACCOUNT (Transaction: PIQSTC)
Called function module: HRIQ_STUDENT_ACCTDATA_UPD_INT
User: RSEIDLER (Client: 100)
Destination: RFC_FICA_CREATE_100 (handle: 6, 10238413, {306B23DE-EF74-F186-BAA8-0022640496A6})
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
So there is an error reading table TFMCA003, but this one is empty, in both systems!
Although the error message is displayed I can not see any limitation working with the created student. So it seems everything is working normal. But the message is unacceptable in a live system, of course.
Any ideas?
Robert

Hi Nivdedita,
Check the rule which you have defined in the workflow.
Regards,
Sravanthi

Error in reading table.

READ TABLE mat_tab INDEX ind.
      IF sy-subrc = 0.
        mat_tab-act_ind = 'A'.
        mat_tab-proc_ind = 'X'.
          WRITE MAT_TAB TO MAT_TAB INDEX IND.
Here I am getting error 'MAT_TAB cannot be converted to char type field.'
plz help me.

I think instead of
WRITE MAT_TAB TO MAT_TAB INDEX IND.
you need
modify MAT_TAB INDEX IND.

Error during Print preview

Hello everyone,
I get this error "Database disconnected, Choose the 'ok' button to exit the database" on several workstations. This does not happen on the server at all. It happens when we are trying to preview a sales order, purchase order or a production order. This system shows this message and shuts down. this also happens when I click on the print layout manager. I have reinstalled SAP several times but the issues still continues to show up. This happens on SAP 8.82 patch level 14.
I would really appreciate if any one has a solution to this problem.
Thank you
Chintan

Hello,
The error message SSFCOMPOSER002 indicates 'No runtime object exists for form '. I just want to confirm the below point:
In Quality,
could you please go to the transaction code - 'SMARTFORMS' and give the smartform name ?
Then, execute the form directly and check whether you are getting the interface program name.
If any issues is there, then re-transport the smartform once again (please do not forget to activate the smartform once again before assigning to the new TR) to the quality.
Kindly tell me if the issue is some other.
Regards,
Selva K.

Error 9 reading message database during Expire Maintenance

I have scheduled maintenance to perform an expire on my post office
Processing information for this run:
Path to PO = servername/mail:\groupwse\wcicc_po
Post Office= WCICC_POST
User = All
Action = Expire
Age Limit = Thursday, July 1, 2010 - 8:00 pm (60 days)
Trash Limit = 15 days
- Exp items = mail, calendar, doc refs, Inbox, Outbox
Verbose = Yes
Upd DiskSpace= No
Output log = servername/mail:\groupwse\wcicc_po\wpcsout\chk\gwexpire.log
I keep receiving the following error
================================================== ==============================
===== TASK LOG - 1305 (4c7c134e.ckl) ===========================================
================================================== ==============================
Checking for items matching purge criteria
Error 9- MESSAGE database read error BAD_IX (0xC00E)
Suggestion- Check physical consistency of database, rebuild if errors found
PROCESSING COMPLETED- total processing time: 0:00:00
================================================== ==============================
===== JOB LOG SUMMARY (4c7c0dcd.ckl) ===========================================
================================================== ==============================
*** User databases found: 1049
*** Total bytes reclaimed: 37799936
*** Average per database: 36034
Processing completed
***** OVERALL STATS FOR THIS RUN *****
Uncorrectable conditions encountered:
CODE DESCRIPTION COUNT
9 Errors reading message databases................... 1
Correctable conditions encountered:
CODE DESCRIPTION COUNT
39 Unrecognized or invalid files in mail directories.. 2
66 GWCheck log files in log directory................. 1
What message databse is this?
The previous lines show that msg254.db processing completed without errors. When I look in ofmsg directory, 254 is the last message database.
Thanks for any help.

lfeltswcicc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error while reading Swd_Header table in workflow.

Hii,
For Pr rejection workflow i have created one Zevent.Inside workflow for User decision derived one rule
which is ending in following error.
Database error '4' reading table 'SWD_HEADER'
The function module for rule 'AC99900003' initialized an exception and returned a message.
I am not able to understan from where n why it is trowing d error.Thne FM written for rule is properly retriving the value.
Pls help me to solve the issue.

Hi Nivdedita,
Check the rule which you have defined in the workflow.
Regards,
Sravanthi

One field is visible in print preview but does not appear when printed

Hi,
We have a batch job that creates the spool, but one field of the form is visible during print preview of the spool but is NOT visible in the print out.
How do we solve this?
Is there an error in the printer?
Thank you!
Rgds,
Freishz

Hi guys,
The catch is, when re-printed, it already appears. But after the batch job has been completed, this does not automatically appear.
This involves, output type of a delivery.
Thanks for your reply!

Restrciting NAST entries while 'print preview' of VA02/03 sales order

Hi experts,
While doing 'printing preview' for the displayed VA03/02 sales order, an entry is created in the NAST table.
The requirement is to not create(or diffrentiate based on some flag) this entry in NAST table while doing 'printing preview' ..but for actual print the entry in NAST table should be created.
Finally the main aim is to differentiate between print preview vs actual print based on NAST entry.
I tried debugging but the parameters for print preview vs actual print are same.
How can the print preview action be distinguished from actual print in such cases.
Thanks

Hi,
The requirement is to not create(or diffrentiate based on some flag) this entry in NAST table while doing 'printing preview' ..but for actual print the entry in NAST table should be created.
For your requirement to differentiate, you can use the field VSTAT in NAST table, this has possible values of 0, 1 and 2.
0     Not processed
1     Successfully processed
2     Incorrectly processed
So as and when an output type for printing is attached, the status of the output remains '0' until the form is actually printed, so in case of print preview it will remain to be '0'. This will change to '1' once the Print command is actually issued.
Regards,
Chen

Problems with Print Preview in PO.

Hi Experts, I need your help!!
I have problems with print preview in purchase order, if the PO has moviments ( GR or Invoice ) I cant see the form of PO in Print Preview...Anybody has idea about happen?
I can see the form before i make the movements after i cant see anymore..This is right?
There is the document explain the problem
[http://www.easy-share.com/1903543233/PO_PROBLEM1.doc]
Thanks

Hi,
What is the particular error message which prevented you from print preview? I have not seen such case before in many systems.
Cheers,
HT

Error in reading table TE417(during print preview)

Similar Messages

Maybe you are looking for