Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

Similar Messages

Status 56 - IDOC with errors added

Hi everyone,
        I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "<b>EDI: Partner Profile not available</b>".
        but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
               The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

Error while receiving by HTTP (error code: 110) ?

Hi Experts,
I am working on IDOC to file Scenario.
I am getting this error in SXMB_MONI. What may be the reason.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Best Regards,
Anil

Check these threaads:
Re: XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
Regards,
ravi

IS Error Member load terminated with error in Essbase Integration Services

Hi all,
Please help!
When i am trying to build the outline of a cube using Essbase Integration Services 9 it gives me the following error:
IS Error Member load terminated with error
Any replies - appreciated.
Thanks in advance.
Avishek Sarkar.

Hi Avishek,
Can you please post the EIS log contenets when error is coming? Also what are the options are you selecting when loading members?
Atul K,

Getting the error: Error while receiving by HTTP error code: 110

Hi,
I have developed an interface which actually gets data from SCM system and in BPM to gets additional data from R/3. There are five synchronous call to this R/3 to get different sets of data. I am using only one communciation channle from BPM to R/3. The interface works perfectly OK in the development system. When the interface is migrated to the test system I found that the four calls work perfectly fine while the last call error out as below and the J2ee server goes down:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any input/help will be appreciated. I have tried increasing timeout/connection alive time but still not get resolved.
Thanks in advance,
Sushma

Hi Prateek,
Thanks. But this note I have checked before and this seems not related. I actually found out the system logs in SM21 and saw the "Operating system call recv failed (error no. 10054)". What I did then is I seach notes related to this error and found a numebr of SAP notes. And I have informed the Basis guys to look into the notes and the system logs. They are working on this and they are deleting the old messages which have errored out. They are suspecting the system memory or too many old messages would have caused this issue.
If you have any knowledge of why this error would have occurred please let me know.
Thanks,
Sushma

Launch error code: -2857 Exited with error code: 215

Anybody have any idea what:
"Launch error code: -2857 Exited with error code: 215"
means when launching an app? Tries to launch, then quit. That shows up in the Console.
Thanks.

First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini

File to Idoc with error in trfc

Hello,
I have a scenario like
File -> XI -> (idoc) R3
The scenario works fine but yesterday I had a problem with the user in the rfc destination(pwd wrong) which is used for the idoc-adapter. In the sxmb_Moni and the RWB the msg. got an success flag/info but it was not delivered to the r3 because the rfc-destintion could not work.
I know that the idoc-adapter is not part of the adapter-engine and my understanding was that the adapter send his status back to the integration engine. But in this cause I got no feedback from the adapter. I think this is not Ok or I am wrong ?
Regards Jami

Hi Jami,
The reason is simple.....the message is sent from the integration server to the adapter engine which was susessful.but what went wrong is the rfc destination being wrong in the receiver adapter which is not known to the integration server. So in simple words, if things work fine in your integration server then it will not throw an error in your sxmb_moni. So had there been a problem between the message transfer from the integration engine to the adapter engine then it would have surely given you an error in your sxmb_moni(for example you specify some wrong parameters while configuring your receiver IDOC adapter).
But in this case since we dont have an IDOC adapter in the component monitoring (it has adapters which are in the JAVA stack only but IDOC adapter is in the ABAP stack)we can see the error in SM58 only.
I hope this answers your question fully. If any other doubts regarding the same pls do ask me.
Regards,
Abhy
Message was edited by: Abhy Thomas

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
<i>CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only</i>
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Error while Importing Idoc with Extension

Hi All,
I already imported idoc with extension and working fine. When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
The objects as displayed in the navigation tree are possibly not up-to-date.
So I tried to Re import the Idoc in IR but it is ending with below error
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The objects as displayed in the navigation tree are possibly not up-to-date.
I already saw some threads in SDN for this error but I am not getting solution.
Can anyone provide a solution ASAP for the above error .
Regards,
Prakash

> When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
Why are you transporting it form Dev? Why not from QA to Prd.
Since this is a Z-IDOC so check if the extension has been released from R3 after doing any modification.
Regards,
Sarvesh

IDoc with error when trying to update two materials with FM: CSAP_MAT_BOM_MAINTAIN.

Hi
In my current project I am facing the below issue.
In client MDM team is creating the master data. The BOM master data also creating through MDM only. The function module used is CSAP_MAT_BOM_MAINTAIN. When user trying to update the two extra BOM line items getting an error " Error while saving the BOM."
In SLG1 transaction we observed that the IDOC is trying to change the header level data. After analyzing I got some conclusion that
while BOM creation header level material and all components are created with change number reference. When the user trying to update two extra line items with new change number system giving error msg as idoc trying to change header level data. As my knowledge with FM:CSAP_MAT_BOM_MAINTAIN no changes possible for header. I came to conclusion as header is updated with a change number while creation and when we changing second time with new change number, system not able to replace the old change number with new change number.
To correct this IDOC what steps i can perform? Is it possible to reprocess this IDOC by changing any field values like MSGFN.
Please suggest what solution we can provide to reprocess this IDOC.
Regards
Kesava

Hi Rupesh
Thanks for the replay.
Here the user created the BOM with the same FM:CSAP_MAT_BOM_MAINTAIN but he created with change number refernce. This change number is updated in header. Later he wants to add some extra components to this BOM with the same FM:CSAP_MAT_BOM_MAINTAIN and he entered new change number second time to do the change. Then system giving an error status for this IDOC.Then if we check in SLG1 the error message is we are trying to change header fields which is not possible " The BOM header can only be displayed, Your entries were ingored". How can we reprocess this IDOC.
Regards
Kesava

Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

Error in Receiver - IDoc with errors added

Similar Messages

Maybe you are looking for