Error in recovery media creation

I bought a new HP laptop recently.Its a HP PAVILION G6 2320TX.I ran the Recovery Media Creation .After the initial setup and burning of files onto my first dvd,when it comes to verify, i am getting an error that states "We are experiencing errors in recovery media creation. Please try again.” ,and the disk ejects out.
I use SONY DVD-R media so,i guess there shouldn't be any problem with the brand.I tried doing this a couple of time and each time i got the same error.
Has anyone else experienced this? Any help/suggestions would be greatly appreciated!
Thanks,
Akash.

Hello Akash_Sanu,
I see that you are having problems with the recovery discs creation on your computer.
I would suggest trying a different brand of disc, here is a link that explains the recovery discs process. If you continue to have problems with the disc creation I would suggest contacting HP support for a set of recovery discs.
Here is a link to the contact options for HP support.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Hp recovery manager We are exsperiencing errors in recovery media creations. please try again.

Hi Bought HP Pavilion 2000-a60 notebook July the 19th and since then have tried to make these recovery disc's, when it gets to burn that's when this message appear's. I have bought the correct dvd-r and have been trying . I also purchase 2 hp desktops in July and had no problem with the HP Recovery Manager on those. So What might the problem be with the notebook HP Recovery manager.

If you phone HP and describe the issue they will usually send a set free.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP Recovery media creation troubles-Can't run

Hi,
I have a hp pavilion dv6 notebook, operation with windows 7 64bits. I'm trying to create a recovery media with a usb drive, i followed the recovery instructions given by HP support. The creation began and everything was fine, till the step of device verification, there's an error message at 31%. The message is:
" we are experiencing errors in recovery media creation. please try again"
I tried again, but same result.
I tried to change the "User account control settings" to "nevery notify" as recommended by HP recovery process instructions, but same result.
In hp recovery manager, the system recovery option can not be highlighetd (Disabled: please use recovery media to recover your system).
Trying to look for a solution in forums, I found that trying to create the media in safe mode can resolve the problem, so tried it. When i run the HP recovery media creation under safe mode, its window is displayed with front screen saying: "Please insert battery. Battery must be installed and the computer must be connected to the power adapter to continue this process". I wish to specify that my battery is inserted and the power adapter too. So why it tells me that ???!!!!
I tried to reactivate (D:Recovery) volume, but it is not highlighted, so I can't do it.
Trying to run recovery process by pressing F11 at startup, give me a windows boot manager screen with the follonwing:
"windows failed to start. a recent hardware or software change might be the cause. to fix the problem:
1.insert windows installation discand restart.
2.choose language. 3. repair your computer.
if you do not have this disc. contact system administrator or computer manufacturer for assisatnec.
File: \Boot\BCD
Status: 0x0000225
info: an error occured while attempting to read the boot configuration data."
Tell me please how to create my recovery usb drive in this case, to finally recover my computer to factory state because I think I have a serious problem with it, specialy startup.
The disk management tell me that all the computer partitions are healthy and dynamic, all are NTFS, except HP_Tools which is FAT32. I also created a partition (F of 440 Go/910 Go when I bought the laptop. In case it May help...
Thank you in advance

When you created the extra partition your hdd was converted from Basic to Dynamic_which breaks the Recovery partition function. It also breaks the ability to create Recovery Media from the partition.
You will need to use Disk Management to delete the extra partition. You will also need to convert the hdd back to Basic- which will require a little more work.
Use Option 1 here to convert to Basic:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Error message when trying to create Recovery Media Creation

I have a HP Pavilion 15 Notebook PC 15-n235sa and when trying to create my Recovery Media Creation on a 32GB Flash drive it comes up with the error mesage We are experiencing errors in recovering media creation. Please try again.
This is after.46% of Verify Disk section. So it is almost there.
I have tried 4 or 5 times with the same result.
Help!

Please try another USB Flash Drive or DVDs. USB Flash Drives indicating Windows 8 compatibility may not work for creating the recovery image. If you are still unable to create your HP Recovery Media, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. When you request this media, indicate that it is free because the HP Recovery Manager failed to work properly.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

My Pavillion g6 Notebook PC C5T59EA#BH4, Sends Error while preforming recovery media creation set !

Hi,
While I am preforming a media creation set (using Discs) the process goes well until it reaches the verifying phase and it sends an error after a while saying that it can't verify my media (I've tried it twice and it still the same).
Now I tried to make in Safe Mode but when I try to launch the Recovery Media Creation it tells me to install Battery while it's installed.
I tried to contact HP but the server didn't recognize my product and sent me to US/Canada Server, but They Couldn't offer help, I can't call HP cause it's so expensive and can't afford that credit to call them !
Help If Possible !

Hello Nakamura011. I understand you've been unable to create recovery media.
Have you tried using a different brand of discs?
Have you had any trouble burning any other media?
What is the full name of the notebook? I can't seem to locate any information for that product number. You could also verify that the product number is correct. This document can show you where the product number is located.
You could also try using a USB thumb drive to create the Recovery Media. This article contains the instructions for creating the USB media.
If this is helpful or you want to say thanks make sure to click the white star under my name to give me Kudos. I really appreciate it!
I'll keep an eye out for your reply. I hope you have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

"Recovery Partition has been Removed" Message in Recovery Media Creation

HP Pavilion G4 2205tx - C5j09PA#UUF
Windows 8 64-bit
"Recovery Partition has been Removed" Message in Recovery Media Creation.
i bought My new HP pavilion G4 laptop just two days ago and didnt change any thing in two Drives named Drive C: for windows and D: for HP Recovery.
now i want to Make a Recovery Disk with HP Recovery Manager Software.
but it show a Massage: "Recovery Partition has been Removed" in Recovery Media Creation Section.
in My Computer Recovery Partition is Almost Full (3.26G of 25.5G is Free) . so i think Recovery files present there .
i haven't any Access to HP for Buy recovery disk or Call Support.
Thanks
This question was solved.
View Solution.

I don't know why your PC is saying your partition is gone - you're right, it doesn't look gone. I do know that if you use the Support Assistant to make backup copies of your Recovery Disks and Then instruct it to remove the recovery partition to give you more space on the hard drive, it will delete the HP factory image of Windows 8 from the recovery partition and leave the normal Windows repair tools behind.
There are tools however that allow you to create your own recovery partition complete with these Windows repair tools and a new image of your instalation so you can restore from that. You could use this tool: Windows 7/8 - OEM Recovery Partition Creator found here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but thats a lot of work and it would be faster and easier just to backup your data and restore from your HP recovery disks you made from Support Assistant. If you didn't make the disks, HP may opt to send you a copy.. they do not normally do this but I have read that some people have good luck getting a free copy of the media from HP.. otherwise they want you to buy the recovery disks ($40.00) . I suppose it depends on the exact circunstances of your situation.
Another solution is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your whole system even with your custom programs installed, to the exact state it was in when you made the backup image. ( this may take several dvd's) I suggest you go this route because restoring your system with Macrium Reflect is Much faster than restoring from the HP Recovery Disks. Even if you do obtain another copy of the Recovery Disks, you should use this tool to make another backup that you can customize to your liking. Your re-installs will be faster, they will already have your chosen software installed, and you will save wear and tear on your HP Recovery Disks. You can then safely delete the recovery partition to gain back that space on your hard drive (since you cannot access it anyway, you won't need that space being taken up). BUT.. you cannot restore from UEFI Mode which is what HP ships with. You have to go into your Bios settings, and switch to Legacy Bios mode, (which disables Secure Boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re-installs you can go back into bios settings and disable Legacy bios and re-enable secure Boot if you like. ( Windows 8 will load in both UEFI mode with secure boot enabled or Legacy bios mode.. it's your choice. UEFI mode will load faster but it will cause problems if you want to dual boot the system with another OS) Hope this helps.

Recovery Media Creation no longer available on New laptop

I have just received a new G255 laptop. First thing I did was try to create recovery media. HP Recovery Manager states "Create a set of recovery media for your system (Recovery Partition has been removed - The Recovery media creation option is no longer Available)
It also states Recovery Partition has been removed, but there is a Recovery (D drive showing with 2.14GB free of 19.6 GB
The recovery partition, when clicked on is empty, even after making hidden files show.
Is there any way to get recovery media, ot should i return the laptop?

Hi:
If you live in the USA/Canada call this number and you can order a set of recovery media.
1-800-334-5144
Have the serial number handy to give to the customer services rep.
Or you can see if you can return it to where you purchased it from.

Recovery Media Creation to USB fails: "CD Creator has stopped working"

Bought new HP desktop system this week. Came with Windows 8, upgraded to 8.1 and then tried to create recovery media onto a USB stick. Followed all the steps in the HP Support article (http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03481733) but at point 9 the copying files stage doesn't complete (progress never gets off 0%) and instead a pop up error message appears saying "CD Creator has stopped working". The only option is to cancel. What should I do next?

Harvec, welcome to the forum. When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them. I believe that you should have made the System Recovery Discs before updating to Win 8.1. The Discs are made using the OS that came on the computer when it is new. The only thing that you can do at this point is order the Discs from HP.

Recovery media creation does not work properly,how can i make recovry disk

when i started recvry med cretion it collected files for 50 mins then i inserted sony dvd, it started writing then suddenly ejected the dvd asking that (use dvd-r or dvd+r, no RW dvd can be used for this ). i checked my dvd.it was correct. my dvd is also written with some data.what to do because recovery can be made once

when i started recvry med cretion it collected files for 50 mins then i inserted sony dvd, it started writing then suddenly ejected the dvd asking that (use dvd-r or dvd+r, no RW dvd can be used for this ). i checked my dvd.it was correct. my dvd is also written with some data.what to do because recovery can be made once

Recovery disk creation error while disk verification in HP PAVILION Ts-15N015Tx Split Notebook pc

Recovery media creation using DVDs failed at verification Process.
Please help I haave tried various DVDs but always the error occurs at veification process.
I even tried creating recovery disk in safe mode in windows 8 but the message PLEASE INSTALL BATTERIES is displayed.
Please help..
thanks in advance

Contact HP Support in your country /region and report the issues you are having. Usually they will send Recovery Media free if the process fails and you are still under warranty. Worldwide contact info can be accessed here >>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Recovery media error

My recovery media creation stops before the last step "veryfing disc" .

Satelite C855-S5312
So it's really this computer.
Satellite P855-S5312 (PSPKEU-002002)
Downloads here.
Maybe this helps?
What can I do if my Windows 8 computer’s USB recovery media doesn’t work?
-Jerry

Recovery Media Files are Missing or Corrupt

Computer will not refresh or reset. Reinstallation functions (Microsoft and OEM) do not work. Messages state
The Factory Recovery Partition that was included with your system is missing or corrupt. Some Features including recovery media creation, factory image restore and system backup may not work but you continue to use the application. (OEM)
Insert media
Some files are missing. Your Windows installation or recovery media will provide these files. (Microsoft)
A required drive partition is missing. (Microsoft)
Recovery drives are visible in Storage area of Computer Management of Administrative Tools.
Internet research produced evidence of a virus. Article described symptoms as prevents users and installed programs from accessing popular and security websites required for normal function, which belong to several antivirus companies, prevents programs
whose window title contains various text strings from being run, disables numerous computer functions, hides folders, makes antivirus programs inaccessible, and obtains information from the computer, such as IP address, name, geographical area, etc. Two items
specifically listed were found in the registry
HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Active Setup\DisableRepair = dword:00000001
HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Active Setup\JITSetupPage = file://%windir%\\web\\iejit.htm Phase =dword:00000006
Those entries were deleted. All items identified in the article where checked on computer. The following entries are questioned and advice is sought.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Amigo Disabled\hkcmds.exe (Graphics adapter)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Amigo Disabled\igfxpers.exe (Graphics adapter)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ForceActiveDesktopOn = dword:00000000
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoActiveDesktop = dword:00000001
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoActiveDesktopChanges = dword:00000001
Advice would be helpful.

Hi,
If you want to reset or refresh your Windows, then I'd like to share this link with you:
http://windows.microsoft.com/en-IN/windows-8/restore-refresh-reset-pc
the reason why I share it with you is that the reset and refresh situations are different depending on the system installed in your machine.
if the system does have a recovery partition, then it might be corrupted, I'm afraid that you eill need to contact the PC manufactiure for a DVD disk.
By the way, Windows 8\8.1 also has some built-in advanced recovery options, you can boot your PC into recovery console to perform some troubleshooting steps.
Yolanda Zhu
TechNet Community Support

Recovery media order for windows 8 64bit

Hello..i bought my note book before 6 months..
The model no is hp15 d017tu and i have windows 8 64bit os..before some days i had a problem in usb device so i gave it to solve in hp care and they changed modem so they reset it fully..and problem is that i dont have recovery disk so they havent give me solution for that..they told that you have to order from hp car by online..so i want to get recovery disk for my notebook..

Hi,
Did it come with Windows 8 or you installed Windows 8 yourself ? If it came with Windows 8, you can create a set yourself:
1. Hold down Win key then press Q
2. Type recovery in the search field. Select Recovery Manager from the list. Allow the action to continue, if prompted.
3. Click Recovery Media Creation.
4. Follow the on-screen instructions to continue.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Create Win 8 recovery media in ThinkPad/Thinkcentre/ThinkStation

QuestionMy machine comes preloaded with Windows 8. Unlike Windows 7, Lenovo Think products do not have options to create recovery media in Windows 8 via Lenovo ThinkVantage Tools.
Thus, is there any way to create recovery disc or media for just in case anything happens to my system and i need to recover back the system to factory default state?
AnswerBelow are the instructions for creating the Lenovo Microsoft Windows 8 preload Recovery Media for Lenovo Think branded systems. A minimum 16GB USB flash drive is required to make a complete backup.
Open Recovery applet by pressing the Microsoft Windows key and X. Select "Control Panel" from the menu and then select "Recovery" from the Control Panel pane as shown below.
Select "Advanced recovery tools" and then select "Create a recovery drive" as shown below.
Click "Yes" at the User Account Control prompt (if prompted
Make sure that "Copy the recovery partition from the PC to the recovery drive." is checked as shown below.
Select the appropriate USB Flash Drive.
The selected drive will be reformatted during the recovery creation process as shown below.
USB format and file copy will begin. This process may take up to hour and will display as shown below.
Once the Recovery Media creation has completed, there is the option to delete the recovery partition. On most systems, this partition is about 10G in size. Lenovo strongly recommends that this recovery partition remain intact as shown below.
Recovery Media Process is complete and Control Panel can be closed.

Does anyone have further information on this issue? I have a T440S obtained in April. I did not immediately create a recovery drive, nor did I delete anything. But now when I try to create recovery media I receive the same messages mentioned above (the option to "Copy the recovery partition from the PC to the recovery drive" is not enabled so I cannot check it; if I click next I get the message that I cannot create a recovery drive..."Some required files are missing". I called Lenovo tech support about this and they said they would send me a CD with Windows 8 recovery media on it. That doesn't entirely help, since my system came preloaded with Windows 8.1 Pro. (Also the system doesn't have an optical drive, tho that is solvable with an external drive). The tech support person said I could use the recovery media to reinstall Windows 8, then upgrade to windows 8.1 and then reinstall all of my apps, which isn't really what I was looking for unless I had a total failure, which I don't. I would however like to be able to repair windows locally if needed. Has anyone been successful at creating a recovery drive with windows pro 8.1?

Recovery Media for HP Pavillion 17-F029wm

Can I not use a CD-R to create my one set of Recovery Media or does it have to be DVD or DVDDDL??
TIA!
James
This question was solved.
View Solution.

Hi, James:
Please see this link for more info...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03481733#N80
Specifically:
The following disc types are not compatible with the Recovery Media Creation program:
CDs
DVD-RW
DVD+RW
DVD-RW DL
DVD+RW DL

Error in recovery media creation

Similar Messages

Maybe you are looking for