Error in regeneration

when i try to regenerate my report in portal308' i get such kind of error.
:=>PLS-00306: wrong number or types of arguments in call to 'SET_NFIELD_VALUE'
& almost to all the functions of this package.
why?
null

Sonali,
This question is best suited to the Oracle9iAS Portal Applications forum.
Thanks

Similar Messages

FPGA compile error

Good Afternoon,
I am getting a compile server error that I do not know how to track down. The server is set up and working fine (LV 8.6 cRIO, FPGA) I can send over on FPGA file and it compiles fine. When the second is sent, the compile request is received and starts, but a quickly get the following pop-up:
"Status: Compilation failed due to a Compile Server error.
Regenerating IP...
ERROR:coreutil - Failure to set parameters on core: Illegal combination: Port A
   Width and Port A Depth
ERROR:coreutil - Failure to generate output products
ERROR:coreutil - An error occurred while running Java. Please examine the
   console or coregen log file for a specific IP related error.
   If there is no specific error the problem may be due to memory limitations.
   For more information please consult solution record 21955 available from:
   http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=21955Finished Regenerating.
ERROR:sim:57 - Error found during generation
Start Time: 2/17/2009 10:22:28 PM
End Time: 2/17/2009 10:22:54 PM"
I am aware that something is amiss in my FPGA VI, but I am unsure what the above messages are telling me to look at. Any ideas? It was working/compiling, but I changed the cRIO backplane configuration, removing some inputs and adding different ones.
Message Edited by Mellobuck on 02-17-2009 09:51 AM
Data Science Automation
CTA, CLA, CPI
SHAZAM!
Solved!
Go to Solution.
Attachments:
FPGA error.JPG ‏63 KB

Xilinx doesn't support a depth of 1. If possible
carry on using a depth of 8 or use some other "register" to hold the
value such as locals, globals, fifos, feedback nodes, etc. Have a look at the following:
Why Won't FPGA Code with a Memory Depth of 1 Compile?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Error while doing Repair Full Req on ODS

HI ALL,
I am trying to load the data in the ODS starting from 2005 to July 2009 through a Repair Full Req loads. Data source is 2lis_11_vaitm.
I have splitted the loads and wheni try to run the Repair Full Req load into ODS its throwing error in source system.
When i checked inthe R/3 for dumps & Logs it shows
Error when attempting to IMPORT object "MC11VA0ITM_TAB".
"CONNE_IMPORT_WRONG_COMP_TYPE"
"SAPLMCEX " or "LMCEXU06 "
"MCEX_BW_LO_API"
Try and find out why the length of the object is supposed to be
different. There are a couple of possible reasons:
    Perhaps the length of the field imported has changed in the ABAP
    Dictionary. Check to see that the length of the field imported is
    the same as the length of the field in the ABAP Dictionary.
    If the data cannot be reconstructed from another source, if must
    be read and converted using the "old" structure" and then
    re-exported using the new structure so that future IMPORTs
    always work with the new structure.
    A new version of the program is may be active and this may no longer
    suit the dataset. Try to get rid of the error by regenerating
    program "SAPLMCEX ". Proceed as follows: Call transaction SE38 and enter
    program name "SAPLMCEX ". Activate the program with the "Generate/Activate"
    function.
how to rectify this problem.
Thanks and Regards
Janardhan KUmar K
Edited by: Janardhan Karmala on Jul 27, 2009 8:52 PM

There appears to have been a change in your R3 environment, perhaps the application of a Support Package or Support Package Stack, and this change updated the ABAP program for this extractor.
Re-generate/re-activate that ABAP program in SE38. This may require you to get an Access Key from your OSS administrator. Whilst re-generating/re-activating this ABAP program, it may require you to re-generate/re-activate other objects in which case you may be required to get additional Access Keys. A pop-up screen will tell you exactly what objects are needed for the Access Key.

Error prompt LO 02012

Hi
when i try to use LiveOffice Connection to get data from Crystal Reports or WebI Universes into Xcelsius i always get an error:
Error while regenerating the report: LO 02012.
Does anybody know what to do?
I use XI 3.0 and Xcelsius 2008. and Excel 2007
When i use the LiveOffice Universe Connection there is no error, but i can´t see data in my excelsheet.
Thanks Thomas
Edited by: Thomas Essl on May 23, 2008 11:59 AM

Are you using Live Office within Xcelsius 2008, or outside of it?
It might be good to try isolating the issue - what happens if you try creating a Live Office connection in Excel, then importing the resulting xls file into Xcelsius 2008? Does the Live Office Connection show up (Data -> Connections ... -> Add -> Live Office Connections.
The error code documentation is currently found here:
[http://support.businessobjects.com/documentation/product_guides/boexir3/en/xi3_error_message_guide_en.pdf|http://support.businessobjects.com/documentation/product_guides/boexir3/en/xi3_error_message_guide_en.pdf]
and that indicates possible connection issues.
Sincerely,
Ted Ueda

Function Module Does not exist

Hello Experts,
I am trying to run the initialization for the Billing conditions 2lis_13_vdkon datasource.
Job is getting cancelled and the following error messages are coming when i check the job log in source system
Job started
Step 001 started (program SBIE0001, variant &0000000006238, user ID BASIS
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_13_VDKON
RLOGSYS    = BWDCLNT900
REQUNR     = REQU_DHKONXGA1B82HZ49O94KQ03C4
UPDMODE    = C
LANGUAGES = *
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000683008
* abap/heap_area_total.......... 2000683008
* abap/heaplimit................ 40894464
* zcsa/installed_languages...... ED
* zcsa/system_language.......... E
* ztta/max_memreq_MB............ 2047
* ztta/roll_area................ 3000320
* ztta/roll_extension........... 2000683008
Function module /BI0/QI2LIS_13_VDKON does not exist
You can only use LIKE and TYPE to specify types in RFC
Internal session terminated with a runtime error (see ST22)
Job cancelled
even when i check in ST22
Category
ABAP Programming Error
Runtime Errors
IMPORT_ALIGNMENT_MISMATCH
Except.
CX_SY_IMPORT_MISMATCH_ERROR
ABAP Program
SAPLMCEX
Application Component LO-LIS
Date and Time
06.05.2014 12:30:28
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC13VD0KON_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 21.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
There is a probably a new version of the program active that does
not match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the Data Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"IMPORT_ALIGNMENT_MISMATCH" "CX_SY_IMPORT_MISMATCH_ERROR"
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
If you cannot solve the problem yourself and want to send an error
please help me in this regards
Quick response will be appreciated.
Thanks in advance

Hi Ram,
no upgrades recently
they have taken backup from production server.
now i am facing this prob in development server.
when i am trying to check in RSA3 it is throwing same short dump
as u said i did all the re activations still i am facing the same issue.
please give me some other sol...
thanks,
srikanth Putta'

Issue in Proxy after migration

Hi All,
I am currently working in upgrade project where we are upgrading from R/3 4.7 to Ecc 6.0 and XI 3.0 to PI 7.1.
Atter migration we are facing below issue:
Cause of the issue is that In new ECC system, Proxy method property automatically got change from Static method to Instance method after proxy activation process.
Moreover Error was associated a method which is directly called by class (statically), while it has been defined Instance Method at class level in new ECC system.
In Old R/3 4.7 system , method is defined as static and called statically.
Can some one please guide how to proceed on this.
Appreciate your suggestions on this.
Thanks
Anku

Hi All,
I have succesfully tested the Outbound proxies by changing the code and it worked fine.However after import in quality system i am facing the issue both for Inbound and outbound proxy.
1) All my MT and DT are in red status and giving error as regeneration required.
2) However for one inbound proxy i have re-imported the DT,MT and SI and it become active in Quality system. However whenever i am right click and check proxy is giving few warning as Structure ZHR_DT_ABC object changed, ZHR_MT_ABC Object changed, Table Type ZHR_DT_ABCD object changed and Interface is in green status with message as Regeneration check.
Can you please guide the me whether i have missed some thing while importing or i should igonore the above warning.
Pleae guide.
Thanks Anku

Module pool program - urgent

Hi Friends..
I am working on a module pool program where I am using Z_BAPI_ADDREMPAU_CREATE and Z_BAPI_ADDREMPAU_CHANGE inside my Zmodule program. I have copied this these BAPIs from Standard BAPI. The reason I created this ZBAPIs because I have created a new fields on the screen in which when I press SAVE button ..these extra fields should also saved.
I am facing a different problem when I am debugging each line ..it is saving into database table( pa0006). But when I press SAVE ..it is going into short dump. I could not understand why this problem is coming. Either it is giving this dump problem or the BAPI is returning a complex application error has occurred
The DUMP is :- Incorrect internal format of ABAP Program SAPLHRMM
Correct the error:- Try regenerating the program SAPLHRMM
Please help.

Hi Ravi,
This is the code in my ZFm.
I am calling bapi_addrempua_change in my ZFM first and then moving extra fields to p0006.
please have a look.
'BAPI_ADDREMPAU_CHANGE'
EXPORTING
    EMPLOYEENUMBER         = EMPLOYEENUMBER
    SUBTYPE                = SUBTYPE
    OBJECTID               = OBJECTID
    LOCKINDICATOR          = LOCKINDICATOR
    VALIDITYBEGIN          = VALIDITYBEGIN
    VALIDITYEND            = VALIDITYEND
    RECORDNUMBER           = RECORDNUMBER
   CONAME                 = CONAME
   STREETANDHOUSENO       = STREETANDHOUSENO
   CITY                   = CITY
   SCNDADDRESSLINE        = SCNDADDRESSLINE
   HOUSENUMBER            = HOUSENUMBER
   APARTMENTID            = APARTMENTID
   POSTALCODECITY         = POSTALCODECITY
   DISTRICT               = DISTRICT
   STATE                  = STATE
   COUNTRY                = COUNTRY
   TELEPHONENUMBER        = TELEPHONENUMBER
   DISTANCEINKM           = DISTANCEINKM
   DISTANCEINKM1          = DISTANCEINKM1
   COMPANYOWNEDAPT        = COMPANYOWNEDAPT
   BUSROUTE               = BUSROUTE
NOCOMMIT               =
IMPORTING
   RETURN                 = RETURN.
Telephone Number
P0006-ZZCN_CODE_TEL      = TELEPHONECOUNTRYCODE.
P0006-ZZAREA_CODE_TEL    = TELEPHONEAREACODE.
Mobile Number
P0006-ZZCN_CODE_MOB      = MOBILECODE.
P0006-ZZAREA_CODE_MOB    = MOBAREACODE.
P0006-ZZMOB_NO           = MOBILE.
Fax Number
P0006-ZZCN_CODE_FAX      = FAXCODE.
P0006-ZZAREA_CODE_FAX    = FAXAREACODE.
P0006-ZZFAXNR            = FAX.
Email Address
P0006-ZZSMTP_ADDR = EMAILADDRESS.
Location.
P0006-ZZPLOC = LOCATION.
Location description
P0006-ZZPLOCDESC = LOCATIONDESC.

Regarding 2LIS_03_BF short dump

Hi Friends
Kindly help me in this regard, I got below short dump while executing "2LIS_03_BF" in RSA3 extract checker.
We wrote the customer exit for this data source, I put the debug point in my routine, but it not stopped. hope this error occuring before the routine. Please let me know the procedure what I should do here
Short dump:
Runtime Error          IMPORT_ALIGNMENT_MISMATCH
Exception              CX_SY_IMPORT_MISMATCH_ERROR
       Occurred on     31.07.2007 at   09:06:01
Error when importing object "MC03BF0_TAB".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When importing object "MC03BF0_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 174.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
The exception must either be prevented, caught within the procedure
"MCEX_BW_LO_API"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
There is a probably a new version of the program which does not
match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the ABAP/4 Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"IMPORT_ALIGNMENT_MISMATCH" CX_SY_IMPORT_MISMATCH_ERRORC
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
Information on where terminated
The termination occurred in the ABAP program "SAPLMCEX" in "MCEX_BW_LO_API".
The main program was "RSFHGEN2 ".
The termination occurred in line 226 of the source code of the (Include)
program "LMCEXU06"
of the source code of program "LMCEXU06" (when calling the editor 2260).
Processing was terminated because the exception "CX_SY_IMPORT_MISMATCH_ERROR"
occurred in the
procedure "MCEX_BW_LO_API" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLMCEX ". Its source code starts in line 5
of the (Include) program "LMCEX$06 ".
Thank & Regards
lasya

Hi Fiends
One more question regarding above problem?
will it be problem in my code which I wrote in Routine, let me know?
CASE i_datasource.
WHEN '2LIS_03_BF'.
    PERFORM 2lis_03_bf_exit
    TABLES c_t_data.
endcase.
FORM 2lis_03_bf_exit TABLES p_c_t_data STRUCTURE mc03bf0.
Endform.
Thanks & Regards
lasya

REP-6102 opening reports jsp

Hi all,
I am running Reports 9.0.2.0.3 under Win2k and developing JSP reports.
Everything went fine until this morning I tried re-opening a report Jsp I was working on.
I got a "REP-6102" error stating "failed to start XML parser".
After agreeing to the message, Windows takes over and says "rwbuilder.exe has generated errors and will be closed by Windows." and of course the program is terminated.
I'm clueless -- I worked on this report for two days with no trouble. I didn't install anything new on my machine. Other JSP reports open, no errors.
The only difference between the "problem" report and the others is its size -- it's rather large.
Does anybody have some hint?
TIA
Andrea

An update. I worked around the problem by making a copy of the Jsp, opening it (curiously, no errors) and regenerating the data model. Now I can open and close it freely.
The mystery remains though. Why in the world should RW have trouble opening a file, and none with a sheer copy of the same file..?
Andrea

Toplink Facade as Web Service - List E shows up as collection of "anyType"

I'm exposing a toplink facade as a web service and one of the functions requires a List<E> parameter. This works fine, except that when the web service is generated, the datatype expected is "anyType" which shows up on the invoke page on OC4J. This would be ok if I were taking a simple value, but I'm wanting to fill in fields for the model via the web service.
I did discover that if my function takes an array E[] then it will work like I want it, but this isn't true for 1-many mappings where the datatype is of List<E>. Can the datatype of the 1-many fields be set to an array? Or does it have to be a collection object?

I'm beginning to think that JDeveloper is actually not set up to work with custom serializers.

I have tried following Implementing Custom Serialization of Java Value Types
but if I edit a file such as oracle-webservices.xml, or the service end-point interface, it just gets overwritten by JDeveloper when regenerating the web-service, or I just get a load of errors when regenerating the web-service.

I don't want to get locked into something that I cannot modify at a later date for fear of breaking it.
Again, has anyone got any ideas, it can't be that unusual to want to provide a grid of numbers as a web service.


Chris 
Java, tutorials and more

SPROXY regeneration termination error (WSDL error)

Hi Gurus,
While regeration of SPROXY I am getting error:
"Proxy generation termination WSDL error (not supported)."
I did regeneration before, but getting this error first time.
Please any one give some suggestions.
Points will be rewarded for all helpful answers.
Thanks,

Problem solved.. I don't know how.. but it is not appearing now..
Thanks VJ for reply.
Edited by: neo S. on Dec 20, 2007 3:13 PM

Can DAQmx regeneration cause 200019 error

I am using a 6230 DAQ card to output a continuous analog (AO_0) tone of varying levels. The problem is that I am trying to use the same card (AI_0) to sample the data and keep getting error -200019 (Measurements: ADC conversion attempted before the prior conversion was complete). I have tried to adjust the sample rates and can't resolve the issue. Can the DAQ card sample while outputting a continuous tone with regeneration disabled?
NI DAQmx: Continuously Generate Waveform - Non Regeneration - Rapidly Updating - WEB Link: http://zone.ni.com/devzone/cda/epd/p/id/370
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Is the AI being hw-clocked at all or is it a software-timed on-demand reading? Can you post a screenshot of the task config and write/read code?
I've used M-series boards for multiple simultaneous tasks before and they have typically behaved fine.
Odd question: any chance that the AO task is producing an uncaught error that ends up causing the AI error? Your setup sounds like one where
*AO* errors would be more likely due to the timing needs of updating the non-regenerating buffer. It's otherwise hard for me to picture how you'd
get the opportunity to attempt a 2nd AI Read before the 1st has finished. You don't have multiple parallel attempts to do on-demand AI Reads, do you?
-Kevin P.

Error during proxy regeneration

Hi,
I'm not sure if this is a PO 7.31 problem or a problem of our connected SAP System.
I designed and configurated a scenario in ESR and NWDS (IFLOWS). Now if my colleagues try to regenerate the proxy in the backend system they got the following error (see attachement):
German:
Service-Provider INTFYIP_II_NAMEOFSERVICEINTERFACE "ist nicht gültig für 'operation pattern'. Erwartete Werte: NORMAL, NO_RM
English (I hope the translation is correct):
Service-Provider INTFYIP_II_NAMEOFSERVICEINTERFACE " is not valid for 'operation pattern'. expected values: NORMAL, NO_RM
In the Service Interface the Attribute Operation Pattern is "Normal Operation".
Does anybody know a solution for this error?

Hi Ravi,
I am new to webserives. I added two filed exiting webservice using Adobe form. Can you please tell me how to regeneate the webservice after adding new field....In se80-->package>Enterprise Services...next how to do please tell me...with navigation step....
Best Regards
Venkatesh V

Error in creation of custom PD infotype

Hi,
I have a task of creating a custom PD infotype(p9xxx). I created HRI9xxx structure with all the custom fields and when I try to create the infotype using tcode PPCI(selected 'field infotype' option and create button in the 'infotype' block was pressed), it gives an error message that p9xxx-begda is not in ABAP dictionary and then it gives me list of screens, module pools and tables created. This custom infotype entry does not exist in T777I. I have tried regenerating it and same problem persists. If anyone knows the solution, please do let me know.
Thanks in advance

Solved.

Sale order before the regeneration of ABAP report: RSM13000

Hi there,
I am just wondering about something.
After we installed support packages, users could not get any sales order without to get any error message and I we could only see an error message via SM21 which says:
Run-time error "LOAD_TYPEPOOL_VERSION_MISMATCH" occurred.
So after we regenerated the ABAP report: RSM13000 after that everythings seems to be ok.
Now the question is: When we try to find the order numbers which the users created before the regeneration we find nothing.
What about this numbers? Did they have not been created at all or what hapened? They customer is asking now.
Thanks in advance
Hanseatik

I still do not know. We created them again

Error in regeneration

Similar Messages

Maybe you are looking for