Error In ReInstalling the Oracle 11g Database

Hi,
I have installed the Oracle 11g before but it was an improper one.I uninstalled it completely by running the Universal Installer and deinstalling the products.
After that ,i installed the Oracle 11g again on the system again and while installing the Database by running the Database Configuration Assistant,i got the error as
ORA 27102:out of memory
I have checked the memory size which i have specified during the installation but it was all default values that were provided.
Please help.....

Platform? 32 or 64 bit? By default 40% of physical RAM is allocated , that may be too much because of platform or wordsize limitations.
Werner

Similar Messages

Errors during unzipping the oracle 11g database downloaded from OTN

The following errors occured during unzipping the database archive. Please help in resolving them, and also provide the copies of them for ease of substitution.
I will be very thankful to you.
database\stage\Components\oracle.javavm.containers\11.1.0.6.0\1\DataFiles\filegroup4.jar. The file is corrupt
database\stage\Components\oracle.network.client\11.1.0.6.0\1\DataFiles\filegroup23.jar. The file is corrupt
database\stage\Components\oracle.swd.jre\1.5.0.11.0\1\DataFiles\filegroup2.jar. The file is corrupt
database\stage\Components\oracle.sysman.oms.core\10.2.0.3.1\1\DataFiles\filegroup6.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup101.10.1.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup101.3.1.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup65.jar. The file is corrupt
database\stage\Components\oracle.rdbms.install.seeddb\11.1.0.6.0\1\DataFiles\Expanded\filegroup1\Seed_Database.dfb. The file is corrupt
database\stage\Components\oracle.ctx\11.1.0.6.0\1\DataFiles\filegroup18.jar. The file is corrupt

It usually better to compare the checksum of the downloaded files with the mentioned checksum over the OTN.If there is any mismatch, its unlikely that download will work. Are the byte checksums matching at both the places?
As Satish mentioned, the best approach would be to download the file again.
Aman....

Error While Importing the oracle 815 database

The error message i get is "segmentation fault(core dump)".
This error Occurs when i import any table from this export file(.dmp). I using the command "imp parfile=filename". When i run the file, the error occure when starting to import the data from the dmp file.
I'm using the oracle8i release 8.1.5.0.0 on SunOS 5.7. import and export utility also has the same version(8.1.5.0.0).

dump file created in 11g database can't be imported in lower 8i version.
Restrictions When Using Different Releases of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
Export dump files can be read only by the Import utility because they are stored in a special binary format.
Any export dump file can be imported into a later release of the Oracle database.
The Import utility cannot read export dump files created by the Export utility of a later maintenance release. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
Whenever a lower version of the Export utility runs with a later release of the Oracle database, categories of database objects that did not exist in the earlier release are excluded from the export.
Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
Thanks
Kuljeet Pal Singh
Edited by: Kuljeet Pal Singh on Mar 19, 2012 7:43 PM

Error while doing the Oracle 9i Database Installation

PROBLEM ONE
While installing the Oracle Database 9i on Windows 2000 Server with 256 MB Ram, I got the following error
Windows - Wrong Volume
The wrong volume is in the drive. Please insert volume ORCL9011_1 into drive E:.
This message occured when percentage done was 100%. It was copying visualsdo.exe
PROBLEM TWO
Then I deinstalled the Oracle 9i software and deleted the oracle folder from both the Windows Explorer as well as in the RegEdit.
Again I started doing the installation...
In Oracle Database Configuration Assistant, while it was installing "Adding Oracle JVM", I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-06576:not a valid function or procedure name"
When I clicked Ignore I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-04021:timeout occured while waiting to lock object
SYS.META-INF/MANIFEST.MF"
Please let me know why this problem occured and what is the solution for this......
If you need any information then please let me know
With Regards
Deepak

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

Platform: Windows Vista 64 Bit Version
Downloaded: Oracle 11g Database 64 Bit
Service Pack 1
Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
Thanks
Preston
System Integrator

Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Not able to connect to oracle 11g database source through OBI Server

Hi,
I am having an issue regarding the database connectivity.
Iam unable to connect to the oracle 11g database through OBI server. However its connecting through SQL Plus with same username/password@hoststring. Its giving the error as :
[nQSError: 17001]Oracle Error code:1017,message:ORA-01017: invalid username/password; logon denied at OCI call OCILogon
[nQSError: 17014]Could not connect to Oracle database.
Please help me out in resolving the issue.

If it's working in one place and not the other then it's obviously not an OBIEE problem.
Are you typing it in right??
Do you have multiple tnsnames.ora files pointing to different databases, maybe sqlplus is picking up one and toad & OBIEE the other and so the username/pw is wrong for that database?
There's a limited amount that can be said to help, as the error is 100% clear what the problem is :) it's just working out whether you're connecting to the database that you think you are connecting to, and then whether the username & PW you're entering is correct for that DB.
BTW OBIEE 10.1.3.4 is supported with 11g, and we're using it without problem here.

Establish 32-bit ODBC connection to 64-bit Oracle 11g database

Hi Everyone,
Just to set the scene:
PC with Windows 2003 server x64 OS installed, Oracle 11g 11.1.0.7 64-bit installed and MS Office 2007 installed.
I am looking for advice on the best way to establish an ODBC link so that MS Access 2007 (32-bit) can connect to the Oracle 11g (64-bit) database.
There are known issues, see [http://support.microsoft.com/kb/942976|http://support.microsoft.com/kb/942976] (which I have hit) when attempting to use a 64-bit ODBC DSN within MS Access 2007. This means that I need to setup and install an Oracle 11g 32-bit ODBC driver to be used against the Oracle 11g database (TNS listener also running 64-bit).
Any thoughts on the best approach I should take to do this?
Regards,
Leigh.

The more information section of the MS support article doesn't give me much to go on other than to explain the differences in how user and system DSNs are displayed and managed between the 2 different bit versions of ODBC administrator and how this information is stored in the different registries (64-bit and WOW64).
I have been able to install 32-bit Oracle11g instantclient and its ODBC driver successfully and then in turn create the 32-bit ODBC DSN, however I am unable to connect to the 64-bit database when I attempt to test the DSN. I have updated the Windows PATH environment variable to include both the path of the Oracle11g DB server and instantclient homes as well as creating a TNS_ADMIN environment variable to point to the location of the Oracle11g TNSNAMES.ORA and the 64-bit 11g listener. However despite this I still get the error when testing the DSN:
Unable to connect
SQLState=S1000
[Oracle][ODBC][Ora]ORA-12541: TNS:no listener

Oracle 11g database link to Oracle 8

Hi,
database-links from an Oracle 11g to an Oracle 8-Database seem to do not work:
The error in enterprise manager is: socket error (translated from german).
There are no alerts at the Oracle 11g-Database.
On the other (Oracle 8) side, the alert we have is an "internal error"
Has anybody else that experience, and maybe a solution?
Thx a lot for your help
Alex

user10956040 wrote:
Hi All,
Why are you hijacking someone else's thread? This just makes it harder to deal with the OP's issue, even if you think it is closely related to yours, and you haven't given any indication that it is at all related.
I have a DB link called "appdb.message.oracle.com".
In 10g "select * from table@appdb;" is working fine but in 11g not.
Why so?
I have two cars in my garage. One works. One doesn't. Why so?
Some description of "not working" would be helpful. Actual ora-nnnnn error messages even more so.
In 11g if i create DB link with the name "appdb" only then the query "select * from table@appdb;" is working fine.
Is there any update in 11g regarding this DB link names.
Plz help me out..
Help us to help you by giving us some clues. Given my comments above, preferably in your own thread.
Thanks in Advance,
Sridhar

Oracle 11g Database Prerequisites Check Failed

hi all, i need to install the oracle 11g database on my D drive but the check was failed where the check take place in C drive. Therefore, i just skipped it.
I do meet all the requirement but still failed, why ?
During the oracle database 11g, there are some components which cannot be found like em.war, em.ear, drluln.sql.sbs, system-application.xml, system-jazz-data.xml .
What is the error about ?
Is it possible to install ?
Thanks.
Edited by: peterwkc on Mar 19, 2011 3:19 AM

schavali wrote:
Pl post details of your OS version, along with which 11g version you are trying to install. Are you following the steps in the official installl Guides - http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html ?
I am not sure why you are acting surprised that the install was not successful when you are ignoring install warnings/errors :-)
As indicated in the thread link above, have you downloaded and unzipped both of the install zip files into the same directory ?
Pl also post relevant sections from the install log that show what prereq checks have failed.
HTH
SriniI copied the disk 2 component into disk 1 component folder where the installation is successful but prerequiresite still failed where i just ignore where i have set all the env variable.
By the way, thanks for your reply.

How to monitor oracle 11g database sessions on Windows 2008 server?

Hi Experts
How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence. i never tested it but seems impresive. It is free and i think it would be use ful to you.
http://myorasql.com/
You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

Oracle 11g database installation

Hello,
I just want to install the oracle 11g database system in my Archlinux. I've looked the wiki but it's a little bit old.
So has someone tried these days installing it in Arch? How is it going? And the AUR script works?
Another question is how mush size it will be when installed?
Thanks!

I have successfully installed Oracle 11g R2 using the instructions in the Dutch article on the wiki: https://wiki.archlinux.org/index.php/Or … erlands%29 (Google translate is useful).
I had an issue with the db console, but dropping and recreating the repository sorted that out: http://www.bestremotedba.com/how-to-dro … er-in-10g/

What are the privileges required for explain plan in Oracle 11g database

I am facing the problem in doing a explain plan for a view in Oracle 11g database. When I select from the view like this:
select * from zonewisearpu
It does a select on the view but when I give explain plan like
explain plan for
select * from zonewisearpu
I get the error like insufficient privileges.
Please let me know if things are getting missed out as I guess system level privileges are required to execute this.
I hope, my question is clear.
It’s a humble request to revert urgently if possible as I need to complete a task and do not know the way out.
Regards

975148 wrote:
Thanks for your reply. I have found out that an explain plan is possible on the user's own objects and is not possible on the granted objects from a different schema. For eg, if I do a explain plan on a view querying on tables from a different view, it would not allow the explain plan to proceed. This could mean that explain plan needs different privileges than just a select.
Requesting for a revert to this.
Here is a simple test case that I have perfomed
SQL> create user test1 identified by test1;
User created.
SQL> create user test2 identified by test1;
User created.
SQL> grant connect, resource to test1,test2;
Grant succeeded.
SQL> create table test1.tab1 as select * from v$session;
Table created.
SQL> connect test2/test1
Conencted.
SQL> show user
USER is "TEST2"
SQL>
SQL> explain plan for
2 select sid,serial#,status,username from test1.tab1 where username<> '';
Explained.
SQL>
So, as can be seen I am able to do a explain plan from user test2 for tables belong to user test1.
As far as privileges are concerned, following is the list
SQL> select * from dba_role_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE                        GRANTED_ROLE                   ADM DEF
TEST1                          CONNECT                        NO YES
TEST1                          RESOURCE                       NO YES
TEST2                          CONNECT                        NO YES
TEST2                          RESOURCE                       NO YES
SQL>
SQL> select grantee,owner,table_name,privilege from dba_tab_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE    OWNER      TABLE_NAME           PRIVILEGE
TEST2      TEST1      TAB1                 SELECT
SQL>
SQL> select * from dba_sys_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE    PRIVILEGE                      ADM
TEST1      UNLIMITED TABLESPACE           NO
TEST2      UNLIMITED TABLESPACE           NO
SQL>

Oracle 11G database for 64 bit windows installation error

Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM

Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?

Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?
We are not licensed for the Oracle Advanced Security Option and I have been tasked to use Oracle Network Data Encryption in order to encryption network traffic between Oracle instances that reside on remote servers. From what I have read and my prior understanding this is not possible without ASO. Can someone confirm or disprove my research, thanks.

Hi, Srini Chavali-Oracle
As for http://www.oracle.com/technetwork/database/options/advanced-security/advanced-security-ds-12c-1898873.pdf?ssSourceSiteId… ASO is mentioned as TDE and Redacting Sensitive Data to Display. Network encryption is excluded.
As for Network Encryption - Oracle FAQ (of course this is not Oracle official) "Since June 2013, Net Encryption is now licensed with Oracle Enterprise Edition and doesn't require Oracle Advanced Security Option." Could you clarify this? Thanks.

ERROR: Install cannot verify the oracle 10g Database

I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
*** Specify the SYS Password Page***
Calling Query EmQueries4.2.2 checkUserExists
schemaName = SYS
schemaPassword = Protected value, not to be logged
connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
userName = EQSYS
Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: Got minus one from a read call
Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
User Selected: Yes/OK
===
I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
Edited by: user8655787 on Apr 15, 2010 2:18 PM
My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
15-APR-2010 23:17:05 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client

A couple of other things that I have tried but have had no affect. I'm still getting the same error:
1. Tried recreating the orapwd file
orapwd file=orapwprdses01 password=prdses01
And make sure that the pfile or spfile has:
remote_login_passwordfile='EXCLUSIVE'
another OTN posting said to try this:
1. Go to directory $ORACLE_HOME/network/admin
2. Modify sqlnet.ora file with following parameter:
tcp.validnode_checking = no
3. If you don't want to disable this, you can put the machine names as follows:
tcp.invited_nodes=(machine1, machine2)
3. Bounce the listener.
.... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

Error In ReInstalling the Oracle 11g Database

Similar Messages

Maybe you are looking for