Error in remote call of destination - when transporting process chain

Hi all,
I have earlier not had troubles transporting process chains from development system to test. Now I get the following error
Error in remote call of destination BW Test
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination BW Test:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I know we have a transaction (RSTPRFC) where we give the password for the user that will do the activation of the PC after transport, but checking with the basis guy, and according to him there has not been any changes to this user. (As the user is the same as the RFC user used when setting up source systems). Running a check on the source systems from RSA1 gives green on all, so then the user should be correct...
(there is also no short dump available in the other system)
Does anyone have a clue on what could be done to locate the error..?
Thanks
Regards,
Øystein

Hi,
you are both right, and I got the issue corrected. In SM59 i have an ABAP connection that when checking it, gave me a logon error. When getting this connection working (by giving another password) and then setting the same password in RSTPRFC, the transport worked.
I'm just not sure I understand why this became an issue.
But anyway, thanks for the input.
Regards,
Øystein

Similar Messages

Error in remote call of destination MDX PARSER.

Hi friends,
creaed one req for importing appset into target system, while importing req (Operating systgem) getting error message.
Error in remote call of destination MDX PARSER.
what might be reason ?
Thanks,
Naresh

This is caused by RFC user being set as for a standard Client-Dependent Objects transports.
Add the profile S_BI-WX_RFC to user(used for import request)

Error in remote call of destination PROCESS_CHAIN

Dear All,
I am getting following error in transport of prcocess chains from DEV to QA.
Error Message :
Error in remote call of destination PROCESS_CHAIN
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination PROCESS_CHAIN:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
Please help!!
Regards
Rakesh

Hi Rakesh,
It's a BASIS problem. After transport during process chain activation, the background user tries to logon with the password and if it fails the chain will not be activated. The contents will be transported though. You can manually activate the chain. You can request the Basis guys to fix this.
- Ram

Error Messages when Transport Process Chain to Production

I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
Version 'M' of chain USFCMD was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
Version 'M' of chain USLDFC was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
Version 'M' of chain USLDFORECT was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

Try to transport the process chain by removing the process chain from schedule.
Go to Process chain select execution in menu..go for option "Remove from schedule"
It may help you.
Regards,
Srinivas.

Error on Transporting Process chain

Hallo,
Can you please help me with the following error?
I am trying to transport a process chain into productive system and I receve the error below:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain SV_CSM_MD_R3_START_VIL was saved without checking
Error in remote call of destination ALE_EP1010_BTC
Start of the after-import method RS_RSPT_AFTER_IMPORT for object type(s) RSPT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Could you please help me?
Thanks
Ramona

Hello Ramona,
Please check the following points,
1. Process Chain is active without any error before transporting
2. All the Processes, variants are collected in the transport request and package.
3. Do set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors
Thanks
Chandran

Transporting Process Chains

I have not transported process chains before so wanted to check:
When transporting process chains do they by default come across inactive and you need to activate them on the receiving system, or are they supposed to be transported in the active state. I would expect the latter but just needed a confirmation

Hi Niten,
process Chains will be transported and needs to be activated and Schedules in the target system, i face the same probelm when transportes from DEV to QTY System.
even for meta Chains you have to trigger events and schedule the meta chains to be triggered by main chain for else mata chains will not be triggered.
hope this helps
Regards
Daya Sagar

Errors transporting process chains

Hi,
we got some problems while transporting process chains.
The error occurs in the method execution. The transport log says:
Start of the after-import method for object type R3TR RSPC (Activation Mode).
Version 'M' of chain <i><name of the chain></i> was saved without checking.
0 Chains Were Selected.
Message no. RSPC031
Specifying process chain ID <i><name of the chain></i>, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
The function is terminated.
There is probably an error in the program. Look for corresponding notes.
We can't find any notes for this error message. The whole thing is confusing, because sometimes we find the chain in the target system, sometimes not.
Has anybody experiences with this kind of problem and how to solve it?
Thanks.
Knut

Hi,
Did you make sure that you transported all the process variants that the chain is using?
Please, check that by going to transport connection and transporting your process chain.
We always use that method to transport process chains: first getting all variants from the chain on transport connection and putting them on a transport request. Second establishing the start time of the PC and finally activating and scheduling the PC. You then release and transport that order.
Which version is your system? 3.0B?
Regards,
David.
Message was edited by: David Sirvent

Transport process chains

Hi all
Please list out the steps to transport process chains from QAU to PRD.
We have all hte infopackages,DTP's,infoobjects int he production.
Now we need to transport ProcessChains.
Intransport connection->Grouping option?collection option?
Please suggest me.
Thanks,
Harika.

Hi Harikag,
The problem that you are facing is most often faced when the transport is made from DEV / QUA system to production system. This occurs more often when objects already existing in production are re-transported to production. Most of the times the corresponding transformation / DTP's get inactive. Nothing can be done as the the entire thing depends on way you transport the objects to production, only prevention is possible or else you need to apply the cure :). Don't worry as this is common scenario during transports. Try activating the transformations manually or you can try to re-transport objects in correct order. Please check the below thread, it will help you to find out the programs that can be used to activate the inactive objects manually.
ODS and Transformations get inactive after i transport it in PD.
Also check the below SCN doc which would be really helpful in case of handling inactive transformations:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10858449-1f59-2e10-0095-dde76e16d330?QuickLink=index&overridelayout=true
Also in case you are transporting a chain then do remember that the start variant of your Metachain & all the local chains if any should be for future date else the chain starts to run automatically once the chain is moved to production. Once the chains are moved then you will need to manually change the scheduling option as per your requirement i.e main or metachiain for the required time & local chains with "start using a metaching or API option". This point should always be remembered during a fresh transport for a new process chain.
Hope that the above info helps you in solving your problem.
Thanks
Edited by: Pawan Chaturvedi on Oct 27, 2011 12:59 PM

Maintaining Transported Process Chains

Hello,
we transported few process chains from our Dev system to Production BW. Now, we are trying to modify the transported process chains in Production BW. It is asking for a transport# when we try to do this. Is it possible to set the system, so it won't ask us for a transport# when making changes to transported process chains?
We are currently on BI 7.0.
Thanks.

If it asking for transprots then Your Prodcution system is Open ....
System Open options:
SCC4: Changes without automatic recording
Changes to repository and cross client customizing objects allowed
Protection level1: NO overwriting
eCATT and CATT allowed
Uncheck all restrictions
then go to se06
System change option: global settings
change from non modifiable to modifable
Systsem closed options:
Changes and transports for client-specific objects-- No changes allowed
Client-independent object changes
No changes to Repository and cross-client customizing objects
Protection level 1: no overwriting
Restriction wehnt starting CATT and ecATT:
ecatt and catt allowed
se06 and change all modifiable to non modifiable.

Send sms when bi process chain failed

Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
Thanks

Hi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi

Transport process chain by transport connection step by step

Hello expert:
how to transport process chain by transport connection step by step?
Many thanks,

Go to RSA1 -> Transport Connection.
Make sure Only Necessary objects is selected under Grouping.
Expand Process Chain -> Click on Select Objects -> Search for the process chain you want to transport.
Select it and click transfer.
When finished collecting - Click on the Red Truck. Create a transport request when prompted to create a request.
Then go to SE10 or SE09 -> Find your request and right click and select release on your transport request as well as the task under it.
After it is released you can check the log by clicking on the log button and see if your transport moved successfully to target system.
Good Luck.
MP.

Sending mail to GROUP ID when a process chain fails.

Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.

hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks

Calling ABAP Program from a Process Chain

I am calling an ABAP Program from Process Chain by adding a Process Type u201CABAP Programu201D,
My ABAP program writes lots of information using write statements.
I looked in Process Chain Log; I do not see output from Write statement. I am pretty sure my write statements were executed. I also looked in SM37 job log. I do not see any more information.
Where to see the output generated from ABAP.
Thanks.

Hi,
First find out where your ABAP program the data written.You need to write it into and spool then only you can see it.
Transaction SP01, you can use the FM 'GET_PRINT_PARAMETERS' in your abap program to write to spool.
Thanks,
Ravi

Transporting Process Chains that execute based on Events

Hi,
I am new to Process Chains and would appreciate some help. I created a process chain in our Development environment. The Chain executes based on an Event trigger. I activated and scheduled the chain. I then transported the chain to our Quality Assurance environment. The chain looks like it transported correctly. However, if I look in sm37, there is not a job out there for the Process Chain with a Release status. Therefore, if I trigger the event, the Process Chain does not run.
What am I missing?
Thanks.

Hi Tekii:
I created many Process Chains and I never had this problem.
NOTES: You cannot transport Process Chain Scheduling.
Do these steps in sequence and let us know what happened.
1) Go to DEV. Open the Process Chain Start Process. Copy the Event Technnical Name. If the Event has a parameter, copy that one too.
2) Go to QAS. Run transaction SM62. See if the event does exist in QAS. (You cannot transport Events, they have to be manually created). If the event doesn't exist, create that event.
3) GO to QAS Process Chain, De-Schedule the Chain. Open the Start Process. Check and see if the Event is the same name. Make sure that, if there is a parameter in DEV paste it in QAS. Check Mark Periodic. Now, Activate and schedule the Process Chain.
4) Now, trigger the event. If the Event has a Parameter, you have to add the parameter too. NOTE: Parameter is case sensitive.
5) The name of Function Module to trigger is: BP_EVENT_RAISE
It needs: Event Name, Event Parameter (if needed), & TARGET_INSTANCE (Copy the Source System Technical Name from BW QAS using RSA1 so that therer are no typos).
Now, tell what happened.
Good luck.
Ram Chamarthy.

Error "Overlapping selection criteria with DTP" when transporting DTP

When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicolá

Hello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo

Error in remote call of destination - when transporting process chain

Similar Messages

Maybe you are looking for