Error in remote-communication

Hello BIA experts,
last Saturday my process chain aborted. The reason in the application log (SLG1) was:
Error in remote-communication with partner http://<blade>:30003/IndexCellTable.
At first I thought the rfc connection or the index service was not available, but in both logs are no entries for this time.
The system runs with Rev48 and this is the first time this error occured.
Any ideas?
Best Regards,
Jens

Hello Vitaliy,
I mean there are entries in the log files, but not for this date and time. I looked into the traces TrexIndexServerAlert, TrexNameServer_History, TrexRfcServerAlert, TrexRfcServer and TrexTCPClientAlert. I couldn´t find any information.
Since 3 weeks we run with Rev48 and I never get an error like this.
I will have a look at this, if it occurs again I´ll create an OSS.
This is not the first time this cube is indexed.
This is something I found also in the application log:
Creation of the BIA index for InfoCube 'FACPRJPRD' terminated while filling (RSD_TREX (Messages from TREX Aggregate Area))
Thanks for your answers
Best Regards,
Jens
Edited by: Jens Gleichmann on Nov 4, 2008 7:35 AM

Similar Messages

Remote Communication Error(Trex).

Dear Friends,
We have configuresd Trex for Full Text Search in DMS. But the Issue is we are not able to Index Documents. When I check the connections under "Trex_admin--->TREX ABAP Customizing" by giving Host Name or IP Address and Trex Index Server Port both "Test Connection" and " Net Performance" are showing OK.
But under Analyze Application Log by using Object as "TREX" & Subobject as " None" system is throwing an error as "Remote communication failure with partner &PARTNER&"
I have searched in SDN and acted according to that. But unable to resolve this issue.
Could u please assist me in this regard.
with regards,

Hi Dayanda,
I also have the same issue can you share the solution?
Best regards
Pascal

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error #1015: Database Communication Error

Hi,
I am having a WebCTRL application on my infra which is connecting to SQL server 2008 R2.
On application side, we are frequently getting error messages saying that ,
Error #1015: Database Communication Error -- Critical problem occurred (With timings) Reestablished (DBname) database connection. details: Successfully reconnected to the database
i dont see any errors on SQL server logs as well as event logs on the server.
Is it happening because of SQL server ?
Is there anything i missed to check ?
Please help me to solve this issues.
Regards,
Vinodh Selvaraj

Can you check if your database properties set Auto Close to ON , it must be set to OFF
https://msdn.microsoft.com/en-us/library/bb402929.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

[Forum FAQ] Troubleshoot the error "The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode"

Symptom
RD License server is a key component of RDS. It licenses users to access RDS servers.
After purchase the required RDS CALs, we need to activate the RDS License server and install the purchased RDS CALs. However, during the installation or after installation, we may face errors
about RDS License.
In most cases, the following error may occur.
Error:
The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server "Server name" does not have any installed licenses with the following
attributes:
Product version: Windows Server 2012
Licensing mode: Per User
License type: RDS CALs
Troubleshooting
1. Check whether the RD License Configuration is configured properly and there are no Warnings in the Event.
2. The License Server should be part of 'RD Server License' group in Active Directory Domain Services.
3. Check if the Licensing Mode is correct.
- To change the Licensing Mode we can use RD Licensing diagnose, PowerShell cmdlet and Group Policy.
Via PowerShell cmdlet:
To change the licensing mode on RDSH/RDVH:
$obj = get-wmiobject -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value)
# Value can be 2 - per Device, 4 - Per user
Via Group Policy
Path: Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
Use the specified RD license servers = FQDN of server name
Set the Remote Desktop licensing mode =
Per User
However, if issue persists, please provide detailed information and post the question in the
Remote Desktop Services (Terminal Services) forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Richard,
You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
Thanks,
Umesh.S.K

SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Erro

Hi All,
We are facing an issue while setting up ccms alerts on PI system application server.
We have solman 7.0 with EHP1 and adding SAP PI netweaver 7.1 as remotely monitored system through solman using saphostagent. The system was registered successfully and alerts work fine for central instance of satellite PI system.
But the application server remians offline status. When we do a connection tect from solman system; it gives error "SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Erro".
In SMICM, HTTP and other services are active for this app server. But in the log we have alerts
"[Thr 1114540352] *** WARNING => Connection request from (17/18/0) to host: <server name>, service: 50013 failed (NIECONN_REFUSED)
[Thr 1114540352] {0009bd3e} [icxxconn_mt.c 2245]"
When try the connection test for connection type G under HTTP connections to external server. It is successful for CI but fails for app server with message "ICM_HTTP_CONNECTION_FAILED"
with same error message (NIECONN_REFUSED).
Please advise how can we fix this. Could this be DNS server entry issue etc.
Thanks
Varun

Hi Sunny,
Yes; the ping from solman to satellite(PI) system and vice versa is working fine. And the dev_icm alerts I mentioned were bpresent in app server of PI eveen before we registered it in solman system.
Thanks
Varun

Error in RFC communication:imsdefault_reg

hi
iam getting this error in trex admin toool..please advice me to resolve this
error in RFC communication:imsdefault_reg
prabash

Hi Prabash,
could be a handful of reasons.
Please open a support message to SAP and grant remote access to your system. Apart from that, please consult the documentation on RFC connection to TREX:
http://help.sap.com/saphelp_erp2005/helpdata/en/19/752e4241f51a2ae10000000a1550b0/frameset.htm
Best, Karsten

SMTP error from remote mail server 522 IP REPUTATI...

I have a hosting business, and one of my clients on BTinternet, using BT Mail is now having mail bounce back to sender when forwarded from her domain mailbox.
Here is an example of the bounced errors -
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
(ultimately generated from [email protected])
host mx.bt.lon5.cpcloud.co.uk [65.20.0.49]
SMTP error from remote mail server after MAIL FROM:<[email protected]> SIZE=3749:
522 IP REPUTATION BAD (please check for IP address listing on reputation services)
I've changed the actual addresses above. The server the mail is being forwarded from has an IP address 138.128.161.22
It seems that BT believes that the server the mail is forwarded from is blacklisted. However, I am unable to discover any blacklist issue for this server. As you can see from the MXToolbox enquiry, there are no blacklists reported -
http://mxtoolbox.com/SuperTool.aspx?action=blacklist%3a138.128.161.22&run=toolpage
Can anybody from BT tell me who I need to contact to find out why they are not accepting mail from my server? I'm not having a problem with mail forwarded to any other ISP, and it seems to be just BT that is rejecting the mail.
I hope someone can advise.
Myles

Hi @magicalwonders
Have a look at http://bt.custhelp.com/app/answers/detail/a_id/47055/kw/postmaster/c/346,6592/session/L3RpbWUvMTQyOD...
Also have a look at this post: https://community.bt.com/t5/Email/BT-Email-bounce-backs/m-p/1477146/highlight/true#M34004
Openwave messaging (was Critical Path) is the company who designed and implemented the BT consumer email system and platform may require you to correctly set up a SPF record.
Also have a look at:
https://community.bt.com/t5/Email/BTinternet-rejecting-all-our-emails/m-p/1480775/highlight/true#M34...
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Error in Receiver Communication Channel in FCC

I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
   <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
   <xsd:complexType name="DT_RecordIB">
      <xsd:sequence>
         <xsd:element name="Records" type="xsd:string" />
      </xsd:sequence>
   </xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure                                  Records
Records.fieldSeparator             'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj Singh

Hey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh

Getting error while creating Communication capability

Hi,
I am getting this error while creating communication capability of Host. I have successfully configured the TP communication capability. Even I have tried many times after changing the names given by me during configuration.
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: uri is unique for object Endpoint: Error -: AIP-11052: Writing following objects: Endpoint failed due to following constraint violation: ENDPOINT_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Endpoint_UK. Unique constraint violation ORA-06512: at "B2B.TRG_ENDPOINT_INS", line 17 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_ENDPOINT_INS'
Please tell me what is the source of error.
Thanks in advance.
Regards,
Anuj Dwivedi

Hi I am getting this error while creating communication capability --
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: trading Partner is unique for object Certificate: Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Certificate_UK. Unique constraint violation ORA-06512: at "B2B.TRG_CERTIFICATE_INS", line 20 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_CERTIFICATE_INS'
Please tell that where could be the problem?
Thanks.
Regards.
Anuj Dwivedi

Provider-hosted Apps debug error: The remote server returned an error: (401) unauthorised

Hi,
Any help appreciated!!
I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app. I get the error on this line:
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
See code below
I created a high trust development environment following the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
http://msdn.microsoft.com/library/office/fp179923
I created a provider-hosted app with the intent to:
create a SharePoint list in the appweb
Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint. (No changes were made to tokenhelper.cs and sharepointcontext.cs)
retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
What happens:
The app is deployed successfully to the Dev site
The SharePoint feature is deployed and activated
The default.aspx page of the remote web loads
The error (see image) is returned on clicking of the button
My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
The code block below is a copy of the default.aspx code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using Microsoft.SharePoint.Client;
using Microsoft.IdentityModel.S2S.Tokens;
using System.Net;
using System.IO;
using System.Xml;
using System.Data;
using System.Xml.Linq;
using System.Xml.XPath;
namespace Idea.GeneratorWeb
public partial class Default : System.Web.UI.Page
SharePointContextToken contextToken;
string accessToken;
Uri sharepointUrl;
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
//// The following code gets the client context and Title property by using TokenHelper.
//// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
//var spContext = new ClientContext("MySPDevInstance");
//spContext.Credentials = new NetworkCredential("username", "password");
//using (var clientContext = spContext.CreateUserClientContextForSPHost())
// clientContext.Load(clientContext.Web, web => web.Title);
// clientContext.ExecuteQuery();
// Response.Write(clientContext.Web.Title);
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
if (contextTokenString != null)
// Get context token
contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
// Get access token
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
// Pass the access token to the button event handler.
Button1.CommandArgument = accessToken;
protected void Button1_Click(object sender, EventArgs e)
// Retrieve the access token that the Page_Load method stored
// in the button's command argument.
string accessToken = ((Button)sender).CommandArgument;
if (IsPostBack)
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
// REST/OData URL section
string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
// HTTP Request and Response construction section
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
request.Method = "GET";
request.Accept = "application/atom+xml";
request.ContentType = "application/atom+xml;type=entry";
request.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
// Response markup parsing section
XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
XNamespace atom = "http://www.w3.org/2005/Atom";
XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
List<XElement> entries = oDataXML.Descendants(atom + "entry")
.Elements(atom + "content")
.Elements(m + "properties")
.ToList();
var entryFieldValues = from entry in entries
select new
Character = entry.Element(d + "Title").Value,
Actor = entry.Element(d + "Diagram").Value,
CastingStatus = entry.Element(d + "SharingStatus").Value
GridView1.DataSource = entryFieldValues;
GridView1.DataBind();
Any ideas what I might be doing wrong

Hi ,
Use the below code
Public string GetAccessToken(){
string sharePointSiteUrlHost = Page.Request["SPHostUrl"].Tostring();
string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
return accessToken;
Than initialize the ClientCOntext with the below Method
private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
ClientContext clientContext = new ClientContext(targetUrl);
clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
clientContext.FormDigestHandlingEnabled = false;
clientContext.ExecutingWebRequest +=
delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
"Bearer " + accessToken;
return clientContext;
use this clientCOntext and it will work.
Do not use
SharePointContextProvider
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

AIP-52251: Error identifying remote trading partner at MLLP Exchange with

used HL7 over MLLP, one trading partner is EAI(B2B Localhost), another is EchoServer(a java application, the hostname is is4-nb4.corp.ha.org.hk). used a script to enqueue message. like below:
DECLARE
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
msg_handle RAW(16);
ipmsg b2b.IP_MESSAGE_TYPE;
xml_clob clob;
msg_id number(10);
subscribers dbms_aq.aq$_recipient_list_t;
BEGIN
select message_seq.nextval into msg_id from dual;
xml_clob := '<?xml version="1.0" ?><ADT_A01 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2005-08-16T16:52:26" CreatedBy="ECXEngine_826" GUID="{1A2726C6-B00E-DA11-8F7A-080020C8D296}"><MSH><MSH.1>|</MSH.1><MSH.2>^~\&</MSH.2><MSH.3><HD.1>EDI</HD.1></MSH.3><MSH.4><HD.1>PWH</HD.1></MSH.4><MSH.5><HD.1>EchoPac</HD.1></MSH.5><MSH.6><HD.1>PWH</HD.1></MSH.6><MSH.7><TS.1>20050804162010</TS.1></MSH.7><MSH.8 xsi:nil="true"></MSH.8><MSH.9><MSG.1>ADT</MSG.1><MSG.2>A01</MSG.2></MSH.9><MSH.10>TEST007</MSH.10><MSH.11><PT.1>#Property(ProcessingID)#</PT.1></MSH.11><MSH.12><VID.1>2.3.1</VID.1></MSH.12><MSH.13 xsi:nil="true"></MSH.13><MSH.14 xsi:nil="true"></MSH.14><MSH.15>AL</MSH.15><MSH.16>ER</MSH.16><MSH.17>#Property(CountryCode)#</MSH.17><MSH.18>ASCII</MSH.18><MSH.19><CE.1>ENG</CE.1></MSH.19></MSH><PID><PID.1>1</PID.1><PID.2 xsi:nil="true"></PID.2><PID.3><CX.1>A0000010</CX.1></PID.3><PID.4 xsi:nil="true"></PID.4><PID.5><XPN.1><FN.1>TEST, Patient 01_10</FN.1></XPN.1></PID.5><PID.6 xsi:nil="true"></PID.6><PID.7><TS.1>20001001</TS.1></PID.7><PID.8>F</PID.8></PID><PV1><PV1.1>1</PV1.1><PV1.2 xsi:nil="true"></PV1.2><PV1.3 xsi:nil="true"></PV1.3><PV1.4 xsi:nil="true"></PV1.4><PV1.5 xsi:nil="true"></PV1.5><PV1.6 xsi:nil="true"></PV1.6><PV1.7 xsi:nil="true"></PV1.7><PV1.8 xsi:nil="true"></PV1.8><PV1.9 xsi:nil="true"></PV1.9><PV1.10 xsi:nil="true"></PV1.10><PV1.11 xsi:nil="true"></PV1.11><PV1.12 xsi:nil="true"></PV1.12><PV1.13 xsi:nil="true"></PV1.13><PV1.14 xsi:nil="true"></PV1.14><PV1.15 xsi:nil="true"></PV1.15><PV1.16 xsi:nil="true"></PV1.16><PV1.17 xsi:nil="true"></PV1.17><PV1.18 xsi:nil="true"></PV1.18><PV1.19><CX.1>10010</CX.1></PV1.19></PV1></ADT_A01>
subscribers(1) := SYS.AQ$_AGENT('b2buser', null, null);
message_properties.RECIPIENT_LIST := subscribers;
ipmsg := b2b.IP_MESSAGE_TYPE (msg_id, null,'EAI','EchoServer','Echo_ADTA01_Process', 'ADT_A01', '2.3.1', 1, xml_clob, null);
dbms_aq.enqueue(queue_name => 'b2b.IP_OUT_QUEUE',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => ipmsg,
msgid => msg_handle);
commit;
END;
show errors;
then go to the B2B Report tab, can see two message like below
EAI EchoServer MLLP - 1.0 HL7 - 2.3.1 Echo_ADTA01_Process WaitFA 2007年11月12日星期一下午05:51:37
Acknowledgement Invalid 2007年11月12日星期一下午
and in the log file, like this:
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage Could not find a Trading Partner with MLLP ID = is4-nb4. Please check the Trading Partner Identification section of your Trading Partner
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
     at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:247)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage identify trading partner by MLLP Id failed for is4-nb4 with ExceptionError -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
     at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:257)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {From=is4-nb4, FromIP=160.19.23.102, FARequired=true, protocolVersion=1.0, ToIP=160.19.55.114, Port=4911, Message-Id=1194861102002-1207274363, protocol=TCP, To=is4wingw02}
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning true
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error Set
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA processed by HL7
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Not creating an ACK for an incoming ACK Message
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA B2BMessage is null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Exit
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA Sent
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 1194861102002-1207274363
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>A0133772116334587C90000068CD8000</b2bMessageId>
<errorCode>AIP-52251</errorCode>
<errorText>Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4</errorText>
<errorDescription>
<![CDATA[Machine Info: (is4wingw02)
Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
here said not find the remote partner, but in B2B server, can ping Echoserver.
what is wrong?

Hello again,
I have tried all different combinations with the IP addresses and host names, but to no avail. Then I changed the Trading Partner Identification Type from MLLP Id to Sending Application (one of the customer requirements is to be able to identify the Trading Partner by the combination of Sending App/Sending Facility, since they are running multiple HL7 applications on one host). However, I still see the same error in the log file - for some reason, B2B is still trying to identify the Trading Partner by the MLLP Id. Redeploying the configuration didn't help, the requested identification type is ignored.
Please help! If needed, I can send the B2B log file, but maybe I'm missing something obvious.
BTW, the customer has installed the patch for bug 6439217 on October 10th. The B2B version is 10.1.2.2.0.
Thanks in advance!

Deployejb : Oracle 8.1.6 : Errors compiling the communication stubs

Hi,
I was able to deploy EJB using JDeveloper 3.1 in the Oracle 8i (1.1.6) DB.However, when I try it manually, it is giving errors.
I was able to use deployejb tool succesfully with Oracle 8.1.5 DB.Is there some problem with Oracle 8.1.6 DB?
This is output, I am getting :
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.....................................done
Compiling Stubs...Errors compiling the communication stubs
C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBHomeImplBase.java:24: i
llegal combination of modifiers: abstract and strictfp
abstract public class _OracleEJBHomeImplBase extends org.omg.CORBA.portable.Skel
eton implements EJBPackage.OracleEJBHome {
^
C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBRemoteImplBase.java:24:
illegal combination of modifiers: abstract and strictfp
abstract public class _OracleEJBRemoteImplBase extends org.omg.CORBA.portable.Sk
eleton implements EJBPackage.OracleEJBRemote {
^
2 errors
Is this a problem with the classpath/path settings?
Please advise!!
TIA
Sandeep
null

Thanks,I got it
-- Sandeep
null

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

iOS: Troubleshooting Personal Hotspot - Apple Support

JDBC : error in receiver communication channel?

Hi Experts ,
I am doing a JDBC to JDBC scenario. The following error comes in my receiver communication channel monitoring.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'VIN_STG_STORER_RMS' (structure 'Statement'): java.sql.SQLException: FATAL ERROR document format in structure 'Statement': expected 'access' tag(s) not found
My receiver data type has got the 'access' tag. What other reason can cause this error?
Receiver table name : VIN_STG_STORER_RMS
Regards,
Shamly

Hi Ranjit,
My moni shows processed successfully. but the error is in communication channel.
I have pasted below the target xml structure. Any suggestions?
Thank you.
Shamly.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://mg.adityabirla.com/mg/wms/store_supps" targetNamespace="http://mg.adityabirla.com/mg/wms/store_supps">
<xsd:element name="MT_WMS_Store_Supps" type="DT_WMS_Store_Supps" />
<xsd:complexType name="DT_WMS_Store_Supps">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
1f3cf480f98411dcb83a0003ba0adbbd
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Statement">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee0ef5c11dcb812001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="VIN_STG_STORER_RMS">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee1ef5c11dca724001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="access" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f0ef5c11dca305001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="STORERKEY" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f1ef5c11dcb3c3001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TYPE" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f2ef5c11dcc33e001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="WHSEID" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f3ef5c11dcabb7001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
...and so on for many other fields.
Edited by: Shamly MM on Mar 24, 2008 10:27 AM

Error in remote-communication

Similar Messages

Maybe you are looking for