Error in replicaiton from R/3 to CRM.

Hi Gurus,
    I am trying to replicate business object, customer_main, from R/3 to CRM. However, I am experiencing error, SYSFAIL, in outbound queue of R/3 whereas, the status in CRM, RUNNING, is showing but so far, there is 0 blocks. Please advise on this error in R/3. I don't know how to solve this error in R/3. Please refer to attached image. I am getting this error in r/3. Please advise.
Thank you,
Ajmal Siddiqui

Hi Willie,
   Here are the screenshot of full dump:
Thank you,
Ajmal

Similar Messages

  • Error message passing from R/3 to CRM

    Hi All,
    I am working in SCM and Crm Integration Project.
    in R/3 Whenever Goods Issue Happend any error message happend that error message i need to pass CRM. Please help me any Idocs isthere for this.
    Thanks,
    Ram

    Hi Rams,
    http://help.sap.com/saphelp_afs64/helpdata/en/d0/15a8424116b211e10000000a155106/content.htm
    i hope the above URL help u to solve ur prob.
    Regards,
    Saravana. S

  • Industry error while doing replication of customer from R/3 to CRM

    Hi,
    We have production system already implemented and going for roll out for another company both R/3 & CRM.
    We have generated conditional objects while doing roll out phase. From then we are getting this error.
    Problem:
    Customers are not getting replicated to CRM. And in SMW01 the error log says
    "Industry 300 not defined for industry system SAPS
    Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
    Since we are going for roll out we have done initial load of all conditional objects
    like 'DNL_COND_A002' etc.
    After running we did checked in R3AM1 - everything was DONE - in green colour.
    But in SLG1 - Display log - there are several entries in Red colour.
    Message text says -
    "It is not possible to change client-independent Customizing objects
    Diagnosis:
    Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
    System response:
    As table T682 contains client-independent Customizing, data transfer is interrupted.
    Procedure for System Administration
    Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
    Now queues are pilled up with the industry error and don't know how to correct these errors.
    Please help.
    Regards,
    Dhanraj Dange

    Hi pankaj,
    Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
    Bulk data will be flown in the first step.
    I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
    Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
    So my question is  Is this b'cos of Delta Download or Bcoz of some other Reason.
    If so "Is there any specific name for this.
    Regards,
    divya

  • Error while Replicating Objects from R/3 to CRM

    Hi,
    While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
    I am working on CRM 5.0
    Regards,
    vimal

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Middleware-Error of Field conversion from R/3 to CRM

    Hello Friends,
    I am getting the below error when we tried replicating pricing condition objects from R/3 to CRM. Kindly help me if you have any solution on this.
    Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
    Message no. CND_MAP141
    Diagnosis
    Conversion of the source field into the target field cannot be implemented. Possible causes may be:
    No conversion is defined for the current contents of the source field in the system tables for condition exchange.
    There is no conversion rule for converting the current field content in the system tables for condition exchange.
    Conversion according to the defined conversion rule was not correct for the current contents of the source field.
    The reason for this os often problems that result from putting together an R/3 System with a CRM System. These problems are, for example:
    not paying attention to the restrictions in CRM for data values or supporting applications and objects,
    incorrect exchange objects or exchange objects with the wrong selection values,
    an inconsistent data structure from the R/3 OLTP System.
    Thanks & Regards,
    Yogesh

    Hello Yogesh
    I have just noticed the message you placed on SDN re condition customising download errors.  Did you ever get to the bottom of this problem ?
    The reason I ask is that I am getting similar errors. I actually started with two errors which I believe are related, these being:
    Funct. CND_MAP_CONV_FUNC_T682Z_FNAME cannot convert content AUBEL of field T682Z-QUFNA to field /SAPCND/T682Z-QUFNA
    and
    Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
    I have since read OSS Note 319636 and looked at maintaining the separate
    conversion rules in CRM Customizing table CND_MAPM_CNV_FLM by adding an
    entry for AUBEL into view V_CND_MAP_CNVFLD using SM30. This I saved to
    a transport.
    I then looked to add AUBEL to the field catalog within the IMG however I received a
    message stating that :
    "Entry is in SAP name space. Message no. /SAPCND/CUSTOMIZING403".
    So it won't let me.
    Did you have similar problems and did you resolve them ?
    Regards
    Ian
    [email protected]

  • Error message in pulling data from R/3 to CRM

    Hi,
    I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
    As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
    Please help.
    Thanks.

    Hello,
    according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
    Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
    Best regards,
    Christian

  • Error in pulling customer master data from R/3 to CRM

    Hi,
    I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
    Is there anyone knows any recent updates from SAP that might solve this problem?
    Please help.
    Thanks.

    Hello,
    it seems your customizing of ERP and CRM is different in this area.
    Please try a new initial load for all the customizing objects which may be responsible:
    DNL_CUST_BASIS
    DNL_CUST_BASIS2
    DNL_CUST_BASIS3
    DNL_CUST_BASIS5
    DNL_CUST_BASIS6
    DNL_CUST_BNKA
    DNL_CUST_KTOKD
    DNL_CUST_PRC
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_PROD3
    DNL_CUST_SPROD
    DNL_CUST_TVAST
    DNL_CUST_TVFS
    DNL_CUST_TVKN
    DNL_CUST_TVLS
    We do every week a new load of this objects using a background job.
    Alternativly you could investigate which customizing object is the correct one and only load this.
    After this new load retest your scenario.
    Best regards
    Manfred

  • Error while downloading Contacts from R/3 to CRM system

    Hi All,
    I am trying to download Contacts from R/3 to CRM system.
    Through Initial Download. For this i have set filters through Tcode: R3AC1
    as on KNVP and KNVV for the field VKORG.
    As we have our requirement to download contacts based on or differentiating
    on 'Sales Org".
    We have downloaded our Accounts properly without any errors.
    But for Contacts we are facing issues such as one or more extra
    relationships are getting created between Contacts and Accounts other than
    its original Contacts.
    Means already existing contacts are creating more relationships after
    download.
    But a unique feature is visible for all, All those with false
    contact-account relationships.
    Contact has field value for 'Address type' missing while the same address
    type field is properly added for correct relationships. ( please find attached the screenshot of the same)
    Any pointers in which direction we should proceed for the solution would be
    appreciated.
    Thanks in advance.
    Cheers,
    Sharad

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Error while replicating employees from R/3 to CRM. BP no. are not created

    CRM Experts,
    Request your help in solving the following issue.
    While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
    <b>Message:</b>
    IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
    <b>Immediately processing not possible: Screen output without connection to user.</b>
    Steps:
    1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
    2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
    3. The BP number is not getting generated.
    Really appreciate your solutions/suggestions/clues.
    Thanks in advance,
    Vijay

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Error in SMW01for BP while replicating data from R/3 to CRM

    Hi Experts,
       While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
    Can anyone please help me on this.....
    Regards,
    Rahul

    Hi Rahul
    As stated above this will happen in case the number is already assigned to a business partner.
    Are you
    1. <u>Reconnecting</u> the CRM system to a  new R/3 and the CRM system has data from an old system?
    2. Has the replication been done before
    3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
    Rewards points if this was helpful.

  • Customer Master replication error from R/3 to CRM

    Experts,
    I am trying to replicate Customer Master from R/3 to CRM.
    All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
    When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
    at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
    This data corresponds to Shipping data in Customer Master.
    Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
    Thanks in advance,
    JD

    Pls see Customer Master replication error
    Closed.

  • SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

    Hi,
    We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
    There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
    I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
    I do not understand whereelse I can see the detailed error message.
    This error does not occur for all articles.
    As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
    Thanks and Regards,
    Lakshmi

    Hi Lakshmi,
    Please follow as below:
    SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
    SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
    Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
    SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
    Regards...
    Arup

  • Errors in Material Transfer from R/3 to CRM

    Hi,
    When in am transferring the materials from R/3 to CRM I am getting the follwoign errors in Transaction smw01
    1)One or more sales texts have been maintained for the combination of sales organization O 10000147    01 and distribution channel 01 for the product 1930107, but no sales data. As long as no sales data is created, you can only save an inactive version of the product.
    The material got downloaded from R/3 to CRM and I can see the material in CRM.so I could notfigure why I am seeing the error in SMW01
    2)Distribution channel 02 is not allowed for sales organization O 10000147
    Waiting for your suggestions

    Hi Zack,
    It is getting more clear now (hopefully). From your last
    reply seems that your material master could not get the
    Plant from R/3 correctly yet.
    Ensure once again you have downloaded R/3 master plant
    into CRM. I don't know whether you aware this, R/3 master
    plant downloaded into CRM as Business Partner. So you
    need to check it, is the required R/3 Plant downloaded
    into CRM as BP. Or the easiest way, just go to CRM
    masterial master and open Tab Sales & Distribution.
    Press F4 in Delivering Loc's field. If you can see the
    required Plant listed here, means you have succesfully
    download the Plant from R/3.
    This plant is required because, Sales Text is maintained
    in R/3 based on Plant and Sales Area. Means, you have to
    able to see Plant (Delivering Loc in CRM Master data
    in order to get Sales Text downloaded from R/3)
    Forget about Sales Text ID, this should be standard
    (there are some steps to check Material text
    determination)
    So please check the Plant and also the combination with
    your Sales Org + Dist. Channel and division (R/3-CRM).
    Because your first message mentioning about error in
    Sales Org & Dist Channel. At this point, I assume you
    can see the Sales Org and Dist Channel in Material Master.
    Hope you can proceed some checking from here...
    Let me know the result ..
    Cheer,
    Gun.

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

  • Error in delta load of 'Customer Group' from R/3 to CRM

    Hi Experts,
    I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
    The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
    Please help as it is a Production issue.
    -- Pat

    Hi Pat,
    Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
    Use R3AS4 transaction to execute the same.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

Maybe you are looking for