Error in Report Output

Hi Every one,
I have an issue in one Oracle report developed in 10g. I am able to get pdf output in User Interface but not Excel output. so I have gone through other oracle report existing which have EXCEL output in UI. I have seen JAVA code as 'desformat=spreadsheet<code>desformat=xls'
when I put the same code for my report, it is rendering the following ERROR:
Error
REP-1814: Report cannot be formatted. Object 'horizontally' can never fit within 'B_1'.
can anybody please let me know the solution for this. this is Urgent.
Thanks in Advance.

Hi,
You can get output in PDF as you see in report runtime preivew.
But you can't get same output in .txt.
Bcoz if it is in .txt , there is a problem with null strings for each of the columns..
Bcoz the report is in bit-map mode.
So plz change it into Character mode.
go thru steps mentioned in reports--help.
type character mode settings.
try with this.
--Basava.S

Similar Messages

BI Publisher - PO_DISPATCH Error generating report output

Hi everyone,
Sorry for my bad english... having said that...
I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
Error:
Error generating report output: (235,2309)
Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
Am I missing some configuration?
Thanks in advance.
Regards,
Veronica.

Have a look at the following doc:
"Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
Stating this happens for example when there is a location with special characters.

Showing Errors in Report Output

Hi
some of users getting this error .printer issue is working fine but they are geting this error
PP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Cannot read file E:\APPS2K\applprod\common\BPOD\out\o1212988.out
Cause: Application Object Library encountered an error while reading the file E:\APPS2K\applprod\common\BPOD\out\o1212988.out.
Action: Check if the file exists. Contact y
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Cannot read file E:\APPS2K\applprod\common\BPOD\out\o1212988.out
Cause: Application Object Library encountered an error while reading the file E:\APPS2K\applprod\common\BPOD\out\o1212988.out.
Action: Check if the file exists. Contact y.
Action: Review your concurrent request log file for more detailed information.

Hi sawwan
Is this happening to all concurrrent requests?
no
In this happening to all users?
no
What is the number of copies?
1
Do you get the same error if you print to "noprint" and "no. of copies = 0"?
i have to ask users
and i got some more info from metalink
This specific error can be ignored, but the more prudent solution is to modify
the concurrent program definition in order that it does not try to print anything
by default.
1. Log into Applications with the System Administrator responsibility.
2. Navigate to Concurrent/program/define and query up the concurrent program.
3. In the lower right corner where the output options are listed, clear the
checkbox next to the word "print". Leave the "save" option
checkmarked to avoid an APP-00088 when running the program because it was
unable to delete the output file which was never created.
4. From the menu bar of this same form, select "Action/Save and Proceed".
as per oracle metalink saying we have to checkbox next to the word "print". Leave the "save" option because this is daily sales report they have to print daily baisis
please suggest me on this
Thanks

"Import Error" at report output.

Hi All,
I need help for a problem that I am frequently encountering.
After I execute a report, an information dialog is thrown on the screen which says:
"Import Error: No result found for key RU 0047621000029"
After pressing the tick button on the dialog, the same dialog pops up again, but with the number on it incremented once. This goes on till the RU0029 in the message becomes RU0119. (In effect, I have to press the tick button nearly 90 times). After all this, the output comes.
This has come so far for 2 reports. The common elements in both the reports so far is only an e-mail code and a selection-screen.
Ravi.

Hi,
Check whether contents in below links helps you to resolve the issue.
Link1
Link2
Thanks,
Raghavendra

Error when sending report output to printer from Forms 10g

Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone          exception;
BEGIN
     select reports_server
     into rep_server
     from system_variables;
     if rep_server is null then
          msg_alert('Error getting the reports server name', 'I', FALSE);
          raise alldone;
     end if;
     :ctrl.run_report_errors := 'N';
     repid := find_report_object('REP_OBJ1');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
     IF :ctrl.rg_print = 'P' THEN
          --Send the output to printer.
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
     ELSIF :ctrl.rg_print = 'R' THEN
          --Rich Text Format
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
     END IF;
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
          rep_status := report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          null;
     ELSE
          :ctrl.run_report_errors := 'Y';
          msg_alert('Error when running report.' || rep_status, 'I', FALSE);
     END IF;
EXCEPTION
     when no_data_found then
          msg_alert('Error getting the reports server name', 'I', FALSE);
     when alldone then
          null;
END;

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

Error while previewing BI Publisher Report Output form Desktop

Hi,
i am getting below error while previewing Report Output form Desktop:
javaw -Xmx256M -jar "C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib\RTF2PDFv2.jar" "C:\Users\mahlawat\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tb_param.xml"
File not found.
Please suggest
Regards,
Meetu

Hi ,
are u able to login into the bipublisher...check once..
http://10.81.200.102:7777/xmlpserver
generaly while connection to the desktop we will give the url at the bottom.
the vpn is connected or not..
Thanks,
Ananth

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

My code not give error nut not give pdf report output

hi master
sir see my code not give error nut not give pdf report output
String reportSource = "./WEB-INF/reports/mfa.jasper";
String reportDest = "./reports/mfa1.html";
Connection conn = null ;
Statement msqlStatement = null ;
ResultSet mrs = null ;
Connection mconn = null ;
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(reportSource);
if (stream == null) {
throw new IllegalArgumentException("Unknown report name '" + reportSource
+ "' requested");
try {
String mfat = ac_categoryDataProvider.getCachedRowSet().getDataSourceName();
javax.naming.Context mctx = new javax.naming.InitialContext() ;
DataSource mds = (DataSource)mctx.lookup(mfat);
Connection mcon= mds.getConnection();
mcon.setAutoCommit(false) ;
JasperPrint jasperPrint = null;
//getSessionBean1().getTripRowSet(),
//getSessionBean1().getAc_categoryRowSet(), mfat getSessionBean1().getAc_categoryRowSet()
jasperPrint = JasperFillManager.fillReport(stream, null,mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex );
please give me idea
thank's
aamir

Thanks Sven.
The query works but the other way. The output is for all the targets, not for the respective target which we select from :p1_target.
select target_name,target_type, column_label,
warning_threshold,critical_threshold,occurrence_count
from sysman.MGMT$TARGET_METRIC_SETTINGS@crmodem
where target_name in (select MEMBER_TARGET_NAME from MGMT$TARGET_FLAT_MEMBERS@crmodem
where upper(AGGREGATE_TARGET_NAME) like '%X' || :P1_TARGET || '%')
Thanks again.

Why it returns ERROR after I changed some Standard Reports output to XML?

Our EBS is a 11.5.10 CU2 instance.
We just upgrated the XML Publisher to 5.6.1 and did all the work described in section "Post-install Steps" of "About Oracle XML Publisher 5.6.1"(Doc ID: Note:357308.1)
Now we are do the testing.
I changed the Standard Report "Journals - General (132 Char)" output type to XML, then ran it.
It returns ERROR
Logs is as flows:
General Ledger: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLGENJRN module: Journals - General(132 Char)
Current system time is 25-AUG-2006 11:39:25
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SET_OF_BOOKS_ID='1001'
P_KIND='L'
P_POSTING_STATUS='U'
P_CURRENCY_CODE='CNY'
P_PERIOD_NAME='AUG-06'
P_PAGESIZE='132'
XML_REPORTS_XENVIRONMENT is :
/global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
Report Builder: Release 6.0.8.25.0 - Production on Fri Aug 25 11:39:26 2006
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 301650.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 25-AUG-2006 11:39:27
Anybody know why?
Thanks!

Hi,
The log file says that the RDF report actually errored out
and its not a problem in XML Publisher.
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
what you can do to debug is change the output type to text and run the report.
See, if the report runs successfully. I guess, there might be some problem with the report itself.
If the text report runs fine, change the output type to xml and run it.
Hope it helps

Reporting Unit Error in EEO report OUTPUT

For EEO report , I've created Address sequence in Table T5UAD and have created Reporting units Type - I in V_T5URU table.
Have also maintained the Reporting Unit and all other required entries in Table V_T5U0P against all US Pers. Areas and Subareas , but when I run the report , I am getting this error
*No reporting unit found in T5URU FOR UNIT NUMBER T548198*
STARNGE part is that this reporting Unit is available in V_T5URU when I go and check the table.
I've deleted it and maintained it again also , but still getting this error.
CAN ANYONE SUGGEST WHAT IS WRONG?
How can I fix this issue?
Any inputs are very highly appreciated as I could not find on Google .....

Hi Ted
Thanks for your reply , but as per information provided by my client , same reporting units say T58591 is being used for both VETS as well as EEO , so I used I option insead of E or V as I cannot define the same reporting unit twice in the table with same name .
Its working fine for almost all other reporting units except for 2 of them ... for which reports giving the error that reporting unit is missing in T5URU but I can see the entry available in this table.
Any Idea why is this happening?

ABAP Dump while Changing the Layout fields in Report output - RCOPCA02

Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
 line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
 glu1, "Übergabestruktur FI-SL-Anzeige
 t000,
 tka01,
 sscrfields,
 vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
 end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
 re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
 subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
 set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
 set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
 s_message(1),
 auth_dbcount like sy-tabix,
 Hex-Konstanten für Minimum/Maximum-Werte
 begin of hex00,
 x1(12) type c,
 x2(12) type c,
 end of hex00,
 begin of hexff,
 x1(12) type c,
 x2(12) type c,
 end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
 v_prctr for glpca-rprctr,
 v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
 include structure rgciv.
data end of val_tab.
 MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
 MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
 include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
 object like arch_obj-object,
 end of ty_archive_objects,
 ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
 lc_report type progname value 'KE5Z',
 lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
 read_ar type c no-display,
 arc_obj like arch_obj-object no-display,
 read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
 ls_selections type rsds_frange,
 lt_selections type rsds_frange_t,
 ls_selopt type rsdsselopt,
 lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
 and not bukrs-low is initial.
 call function 'KOKRS_GET_FROM_BUKRS'
 exporting
 i_bukrs = bukrs-low
 importing
 e_kokrs = kokrs-low
 exceptions
 no_kokrs_found = 1
 others = 2.
 if sy-subrc <> 0.
 clear kokrs-low.
 endif.
endif.
if not kokrs-low is initial.
 call function 'K_KOKRS_READ' "get fiscal year variant
 exporting
 kokrs = kokrs-low
 importing
 e_tka01 = tka01
 exceptions
 not_found = 1
 not_found_gjahr = 2
 others = 3.
 if sy-subrc = 0.
 call function 'G_PERIOD_GET'
 exporting
 date = sy-datlo
 variant = tka01-lmona
 importing
 period = poper-low
 year = ryear-low
 exceptions
 ledger_not_assigned_to_company = 1
 period_not_defined = 2
 variant_not_defined = 3
 others = 4.
 if sy-subrc = 0.
 poper-sign = 'I'.
 poper-option = 'EQ'.
 append poper.
 ryear-sign = 'I'.
 ryear-option = 'EQ'.
 append ryear.
 endif.
 endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
 exporting
 i_save = g_save
 changing
 cs_variant = gx_variant
 exceptions
 not_found = 2.
if sy-subrc = 0.
 p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
 p_vari = '1SAP'.
 move p_vari to gx_variant-variant.
 call function 'REUSE_ALV_VARIANT_EXISTENCE'
 exporting
 i_save = g_save
 changing
 cs_variant = gx_variant
 exceptions
 not_found = 1.
 if sy-subrc ne 0.
 clear p_vari.
 clear gx_variant-variant.
 endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
 exporting
 i_report = lc_report
 i_reporttype = lc_reporttype
 importing
 e_xusedb = read_db
 e_xusear = read_ar
 e_archobj = arc_obj
 e_infosys = read_as
 tables
 t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
 exporting
 p_status = 'SELSCREEN'
 p_program = 'RCOPCA02'
 tables
 p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
 free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
 call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
 exporting "MICP30K166368
 table = 'GLPCT' "MICP30K166368
 importing
 subrc = rw_subrc "MICP30K166368
 tables "MICP30K166368
 it_fieldr = bbs_fieldtab. "MICP30K166368
 call function 'RSTI_APPL_STACK_POP'"oder Recherche?
 importing
 i_rec = a_rec
 exceptions
 appl_stack_not_initialized = 1.
 re_subrc = sy-subrc.
 if re_subrc = 0.
 check Receiver is this report
 if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
 or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
 re_subrc = 2.
 endif.
 endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
 "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
 importing "RD "4.6a
 e_racct = racct-low. "RD "4.6a
 "RD "4.6a
 "RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
 "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
 importing "RD "4.6a
 e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
 exporting
 kokrs = kokrs-low
 exceptions
 not_found = 1
 not_found_gjahr = 2
 others = 3.
if sy-subrc = 0.
end of insertion note 522715
 call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
 exporting "RD "4.6a
 i_kokrs = kokrs-low "RD "4.6a
 i_ryear = ryear-low "RD "4.6a
 importing "RD "4.6a
 e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
 exceptions
 table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
 exporting
 kokrs = kokrs-low
 exceptions
 not_found = 1
 not_found_gjahr = 2
 others = 3.
if sy-subrc = 0.
end of insertion note 522715
 call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
 exporting "RD "4.6a
 i_kokrs = kokrs-low "RD "4.6a
 i_ryear = ryear-low "RD "4.6a
 importing "RD "4.6a
 e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
 exceptions
 table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
 call function 'K_KOKRS_READ'
 exporting
 kokrs = kokrs-low
 exceptions
 not_found = 1
 not_found_gjahr = 2
 others = 3.
 if sy-subrc <> 0.
 message e101(ki) with kokrs-low.
 endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
 or sy-ucomm = 'ONLI' and read_ar = 'X'
 and read_as is initial and lr_files[] is initial.
 if lt_arch_obj[] is initial.
 lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
 lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
 endif.
 call function 'KARL_DATA_INPUT_SELECT'
 exporting
 i_db_and_arc = lc_set
 i_infosys_possible = lc_set
 i_object_fixed = 'V'
 i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
 i_report = lc_report
 i_reporttype = lc_reporttype
 tables
 t_objects = lt_arch_obj
 t_arch_sel = lr_files
 changing
 c_xusedb = read_db
 c_xusear = read_ar
 c_archobj = arc_obj
 c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
 if rw_subrc eq 0 or re_subrc eq 0.
 refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
 racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
 versa, afabe, eprctr,
 v_racct, v_prctr, v_pprctr.
 clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
 racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
 versa, afabe, eprctr,
 v_racct, v_prctr, v_pprctr.
 endif.
Parameter einlesen über Report-Writer-Schnittstelle *
 if rw_subrc eq 0.
 perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
 elseif re_subrc eq 0.
 perform re_get_parameters.
 endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
 call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
 call function 'DB_DO_NOT_USE_CLIENT_INDEX'
 exporting
 value = sy-mandt
 tables
 mandttab = rclnt.
 select (tab_fields) from glpca
 client specified
 package size packsize
 APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
 into corresponding fields of table i_glpca
 where rldnr in rldnr
 and rrcty in rrcty
 and rvers in rvers
 and kokrs in kokrs
 and rbukrs in bukrs
 and ryear in ryear
 and rassc in rassc
 and hrkft in hrkft "note 550972
 and sbukrs in sbukrs "note 550972
 and shoart in shoart "note 550972
 and sfarea in sfarea "note 550972
 and racct in racct
 and rprctr in prctr
 and sprctr in pprctr
 and poper in poper
 and drcrk in drcrk
 and activ in activ
 and rhoart in rhoart
 and rfarea in rfarea
 and versa in versa
 and eprctr in eprctr
 and afabe in afabe
 and rmvct in rmvct
 and docct in docct
 and docnr in docnr
 and stagr in stagr
 and rtcur in rtcur
 and runit in runit
 and refdocct in refdocct
 and refdocnr in refdocnr
 and werks in werks
 and rep_matnr in repmatnr "RDIP40K020663
 and rscope in rscope "RDIP40K020663
 and rclnt in rclnt. "dirty trick to mislead DB-optimizer
 if sy-dbcnt > 1.
 text1 = sy-dbcnt.
 condense text1.
 concatenate text1 text-m01 into text2 separated by space.
 call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = text2. " ... Datensätze gelesen
 endif.
 endselect.
Entfernt nicht zugehörige Einträge....................................
 loop at i_glpca where ( not rprctr in v_prctr )
 or ( not sprctr in v_pprctr )
 or ( not racct in v_racct ).
 delete i_glpca.
 endloop.
endif.
*archiv
if read_ar = 'X' and not
 ( read_as is initial and lr_files[] is initial ).
 call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = 'Lesen im Archiv'(p12).
 define fill_lt_selections.
 if not &2[] is initial.
 clear ls_selections.
 move &1 to ls_selections-fieldname.
 loop at &2.
 clear ls_selopt.
 move-corresponding &2 to ls_selopt.
 append ls_selopt to ls_selections-selopt_t.
 endloop.
 append ls_selections to lt_selections.
 endif.
 end-of-definition.
 fill_lt_selections 'RLDNR' rldnr.
 fill_lt_selections 'RRCTY' rrcty.
 fill_lt_selections 'RVERS' rvers.
 fill_lt_selections 'KOKRS' kokrs.
 fill_lt_selections 'RBUKRS' bukrs.
 fill_lt_selections 'POPER' poper.
 fill_lt_selections 'RYEAR' ryear.
 fill_lt_selections 'RPRCTR' prctr.
 fill_lt_selections 'SPRCTR' pprctr.
 fill_lt_selections 'RACCT' racct.
 fill_lt_selections 'DRCRK' drcrk.
 fill_lt_selections 'ACTIV' activ.
 fill_lt_selections 'RHOART' rhoart.
 fill_lt_selections 'RFAREA' rfarea. "note 401961
 fill_lt_selections 'STAGR' stagr.
 fill_lt_selections 'RTCUR' rtcur.
 fill_lt_selections 'RUNIT' runit.
 fill_lt_selections 'VERSA' versa.
 fill_lt_selections 'EPRCTR' eprctr.
 fill_lt_selections 'AFABE' afabe.
 fill_lt_selections 'RMVCT' rmvct.
 fill_lt_selections 'DOCCT' docct.
 fill_lt_selections 'DOCNR' docnr.
 fill_lt_selections 'REFDOCCT' refdocct.
 fill_lt_selections 'REFDOCNR' refdocnr.
 fill_lt_selections 'WERKS' werks.
 fill_lt_selections 'REP_MATNR' repmatnr.
 fill_lt_selections 'RSCOPE' rscope.
 fill_lt_selections 'HRKFT' hrkft. "note 550972
 fill_lt_selections 'SBUKRS' sbukrs. "note 550972
 fill_lt_selections 'SHOART' shoart. "note 550972
 fill_lt_selections 'SFAREA' sfarea. "note 550972
 call function 'EC_PCA_SELECT_FROM_ARCHIVE'
 exporting
 i_selections = lt_selections[]
 i_files_sequential_read = lr_files[]
 importing
 e_glpca = lt_glpca_archiv[]
 exceptions
 no_infostruc_found = 1.
 if sy-subrc = 1.
 message id sy-msgid type 'I' number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 endif.
 clear i_glpca.
 loop at lt_glpca_archiv assigning to i_glpca.
 append i_glpca.
 endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
 message s000.
 exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
 sort i_glpca by rldnr ryear rbukrs rrcty rvers
 docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
 refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
 perform check_repo_authority changing authorised.
 if authorised is initial.
 delete i_glpca.
 s_message = 'X'.
 zählen der Sätze ohne Berechtigung
 auth_dbcount = auth_dbcount + 1.
 else. "Weitere Bearbeitung nur für berechtigte Belege...
 Zusätzlich merken der Anzahl der Ausprägungen
 bestimmter Dimensionen
 on change of -rbukrs
 ct = '10'
 importing
 currency = hsl_curr.
 endon.
 externe Immobilienbezeichnung "ww/kb
 on change of i_glpca-imkey.
 if ( not -dabrz
 I_length = 20
 importing
 e_empge = -konty.
 endif.
 CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
 endif.
 endon.
 on change of i_glpca-dabrz.
 call function 'REMD_IMKEY_TO_EMPGE'
 exporting
 i_imkey = i_glpca-imkey
 i_dabrz = i_glpca-dabrz
 i_length = 20
 importing
 e_empge = i_glpca-empge
 e_konty = i_glpca-konty.
 CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
 endon.
 Konvertierungsproblem mit PSP-Nummer bereinigen
 if not -psppp.
 endif.
 endif.
 Währungen in Hilfsfeldern speichern
 if -ksl_curr = ksl_curr.
 endif.
 modify i_glpca.
 endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
 message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
 text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
 exporting
 i_callback_program = 'RCOPCA02'
 i_callback_user_command = 'USR_CMD'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 I_CALLBACK_END_OF_PAGE =
 I_CALLBACK_END_OF_LIST =
 i_callback_pf_status_set = 'SET_PF_STATUS'
 I_CALLBACK_LAYOUT_SAVE =
 I_CALLBACK_FIELDCAT_SAVE =
 i_tabname = 'I_GLPCA'
 is_layout = t_layout
 it_fieldcat = t_fieldcat
 I_FCTYPE = 'R'
 IT_EXCLUDING =
 it_special_groups = t_spec_groups
 IT_SORT =
 IS_SEL_HIDE =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 tables
 t_outtab = i_glpca
 exceptions
 others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 exporting
 I_INTERFACE_CHECK = ' '
 i_callback_program = 'ZRCOPCA02'
 i_callback_pf_status_set = 'SET_PF_STATUS'
 i_callback_user_command = 'USR_CMD'
 i_structure_name = 'I_GLPCA'
 is_layout = t_layout
 it_fieldcat = t_fieldcat
 IT_EXCLUDING =
 it_special_groups = t_spec_groups
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 i_default = 'X'
 i_save = g_save
 is_variant = g_variant
 it_events = t_events
 IT_EVENT_EXIT =
 IS_PRINT =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 tables
 t_outtab = i_glpca
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
 exporting
 i_kokrs = -racct
 i_vorgn = 'REPP'
 i_actvt = '28'
 i_auth = auth
 i_no_dialog_message = 'X'
 exceptions
 no_authority = 1
 data_missing = 2
 others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
 call function 'PCA_G_GLTP_AUTH_CHECK'
 exporting
 rldnr = -rrcty
 exceptions
 no_authorisation = 1
 others = 2.
 if sy-subrc = 0. "ok, User is authorized
 authorized = 'X'.
 endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
 Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
 include structure dntab.
data end of nametab.
select single * from t000
 client specified
 where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
 exporting
 only = 'T'
 tabname = 'RPCA2'
 tables
 nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
 and fieldname ne 'HSL_CURR'
 and fieldname ne 'EMPGE' "ww/kb
 and fieldname ne 'KONTY'. "ww/kb
 move nametab-fieldname to tab_fields-name.
 append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
 exporting
 e_repid = 'RCOPCA02'
 e_type = 'R'
 tables
 it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
 bbs_fieldtab-rfield = 'RPRCTR'.
 modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
 bbs_fieldtab-rfield = 'SPRCTR'.
 modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
 bbs_fieldtab-rfield = 'RBUKRS'.
 modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
 FORM FILL_LISTHEADER *
 List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
 exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
 t_listheader-info = i_glpca-rldnr.
else.
 t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
 t_listheader-info = i_glpca-kokrs.
else.
 t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
 t_listheader-info = i_glpca-rbukrs.
else.
 t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
 t_listheader-info = i_glpca-poper.
else.
 t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
 t_listheader-typ = 'S'.
 t_listheader-key = 'Geschäftsjahr '(h05).
 t_listheader-info = i_glpca-ryear.
 append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
 t_listheader-info = i_glpca-rvers.
else.
 t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
 afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
 afield-no_out = 'X'.
endif.
append

Hi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
 Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
 What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
 Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
 Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
 > message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

Double Click on ALV Report Output, Bringing to selections creen

Hello Gurus,
Please help me When i do double click on ALV Report output , it is going back to Selection screen, actually its working as Back button. Now how to stop it.. I did debugging but i cannot trace it.

PERFORM SUB_CREATE_FCAT.
DATA W_REPID LIKE SY-REPID.
 W_REPID = SY-REPID.
ls_layout-colwidth_optimize = 'X'.
ls_layout-zebra = 'X'.
PERFORM SUB_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = SY-CPROG
 I_CALLBACK_PF_STATUS_SET = 'STATUS'
 I_CALLBACK_USER_COMMAND = 'C_USERCOMMAND '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
 IS_LAYOUT = ls_layout
 IT_FIELDCAT = IT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 IT_SORT = IT_SORT
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
 I_SAVE = 'U'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = T_FINAL
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
 IF sy-subrc <> 0.
* Implement suitable error handling here
 ENDIF.

Error in report bursting/distribution

I develop a group report for distribution. I use XML file to save report output as pdf into a particular location. Files save with column name exist in group. Its working fine, but some time i face a problem that report save with different name and the content (e.g. group for which report is created) are different. I will very thankful if anyone can let me know the reason of this error. Its urgent.
Application Server Version: 10.1.2.0.2
Edited by: user12079725 on Nov 20, 2012 10:21 PM

If it is urgent, please enter a service request to Oracle. File names in distr of Reports reports is documented Here I presume. http://docs.oracle.com/html/B14048_02/pbr_dist.htm

Report Output for Currency Field--EKBE-WRBTR

Hello ABAP Experts
Since the Issue is related with Related Report output. Thought ABAP General Forum would be right place to post.
If not Suggest an appropriate forum for the same. I shall post them in Correct Forum.
Currently the report display Currency value From EKBE- WRBTR field
Actual Record Stored in EKBE is like this
0,00
400,00
1.600,00
client requirement is
0, 00
400,00
1600, 00
Option-1
I have tried option for conversion to CHAR & printing in Output, the issue I face is when I export to Excel I am getting an ABAP Error CONVT_NO_NUMBER(Short Dump)-This dump is due to conversion while exporting to excel.
Option-2(from SDN)
Give a logic based on T005 table i.e. this table has the decimal place setting for a each country (this I need to Verify)u2014But the I fear that report output can be confusing.
Expecting all your expert inputs!!
BR
Bharath

Hi Bharat,
You can set it using user--profile I guess.
For own data go to
system>user profile>own data---> defaults.
There you can select the currency format.
Hope this helps you.
Thanks,
Arun

Error in Report Output

Similar Messages

Maybe you are looking for