Error in Reporting Authorization

Hi All,
I created an authorization object for reporting, which contains 7 different info objects.
I tried to apply that info object to a sales report by creating a variable of type authorization.
I added the object in a profile and attached it to a role.
But when i try to access the report, I am not able to see all the available values in the selection list. Instead , I am getting a message like "No Values Available or Not Authorized to Display"
To be more specific, I have 3 info objects Company Code, Plant and Sales organization which i want to restrict by authorization.
I added 3 company codes, 3 sales org values and 3 plants to the authorization object's value.
These values are not available for selection in the query.
Why this is happening?
Should I do anything else other than this?
Please help me
Thanks
Shobin

Hi Sourav,
Thanks alot. I got your document.
Infact I did exactly what is mentioned in that document.
Still , I am not able to select any values when i run the query.
Anyway, Thank You So much for your help
Shobin

Similar Messages

  • BW report authorization for restrict cost center

    dear all,
    i have problem on BW report authorization for restrict cost center.....when i execute the query, after selection screen, appear error message 'you cannot change zv_cctr for characteristic 0COSTCENTER during query'.
    note : zv_cctr is variable restriction for costcenter, type processing = customer exit.
    below the customer exit :
    WHEN 'ZV_CCTR'.
        IF i_step = 2.
          DATA : gt_mstuidvscc TYPE TABLE OF  ztbw_mstuidvscc,
                 gs_mstuidvscc TYPE  ztbw_mstuidvscc,
                 wa_final2(10) TYPE c.
          SELECT * FROM ztbw_mstuidvscc INTO CORRESPONDING FIELDS OF TABLE gt_mstuidvscc
            WHERE userid = 'sy-uname'.
          LOOP AT gt_mstuidvscc INTO gs_mstuidvscc.
            wa_final2 = gs_mstuidvscc-kostl.
            l_s_range-opt = 'EQ'.
            l_s_range-high = wa_final2.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
        ENDIF.
    Regards,
    Tony

    i defined variable as ready for input and mandatory.
    regards,
    Tony

  • Reporting authorization issue after BI 701 05 EHP1 upgrade

    Hello,
    We have recently upgraded our BI 7.0 to BI 701 EHP1 with 05 patch level. After this we had a problem with reporting authorizations for a report (query), which has created under Virtual Infoprovider.
    Earlier the report use to be execute perfectly with authorizations S_RS_ICUBE object with Act 03, Subobject DATA, but after upgrade to EHP1, while executing report its throwing a error pasted below.
    =============================================================================================
    "Diagnosis
    Errors occured while reading a VirtualProvider outside the BI system. Check whether the previous error messages contains any information about the possible cause of this error.
    It is possible that the error message can not be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error class in the source system of the VirtualProvider.
    System Response
    Procedure
    Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occure with the connection to the system; these can lead to system termination. If the code for the VirtualProvider is not from the SAP, contact the relevant person to help resolve the issue.
    If an SQL error is listed in the previous message, see the procedure for SQL errors."
    ===============================================================================================
    After running st01 trace we identified the missing authorization is S_RS_ICUBE with Act 03, subobject DEFINATION.
    Here please tell why is the subobject check is performed to execute a report (query), as this is happening after EHP1 upgrade, so let me know if anyone had any clue on this ...
    Thanks

    Hi Martin,
    Thanks for reply.
    The assumption what you made are correct, but these are the possible reasons only. Is there any specific note or any info from sap that these changes came due to the new release change, so that i can tell my manager clearly.
    And I am not sure whether this is impacting the reports which using the VirtualProviders (Virtual CUBE) in place. If you could get bit more information that will be helpful...Thanks in advance.
    Sridhar

  • Error ERR-1082 Error in executing authorization scheme code.

    Hi,
    i imported my application from test to prod environment
    when run application i received the error (on login page)
    ORA-06550: line 13, column 19: PL/SQL: ORA-00942: table or view does not exist ORA-06550: line 12, column 13: PL/SQL: SQL Statement ignored ORA-06550: line 16, column 18: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 16, column 4: PL/SQL: Statement ignored ORA-06550: line 17, column 14: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 17, column 4: PL/SQL: Statement ignored ORA-06550: line 25, column 19: PL/SQL: ORA-00942: table or view does not exist ORA-06550: line
    Error      ERR-1082 Error in executing authorization scheme code.
    Any help?
    Thanks in advance
    Costantino

    Hi Scott,
    Thank you for the quick reply.
    What I did was to install APEX 3.1 to 11g db, and installed packaged application which called Software Management. It is working fine to log into the application and other operations, but I got the same error which reported on this thread once I applied the existing authorization schemes. So I thought if I missed to import the apex_access_setup and apex_access_control tables. I am looking for the solution to enable the default authorizations...
    I would appreciate if you could give me any suggestions.
    Thanks,
    Rui

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

  • Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

    I just noticed today that any Graph or PDF report I try to view I get the
    following error - Error from reports from ZAM - File does not begin with
    '%PDF-'. I tried to just save the file and then open it, but get the same
    error. I can open other pdf files I have downloaded from other sites ok.
    Anyone have any idea? I haven't done anything to that server that I am
    aware of in quite a while.
    Thanks
    Bill

    I took a closer look at the files it downloaded, opened them with notepad,
    haer is what it says:
    XSL Transform or subsequent processing failedThe document has no pages.
    "Bill" <[email protected]> wrote in message
    news:2bBtk.2164$[email protected]..
    >I just noticed today that any Graph or PDF report I try to view I get the
    >following error - Error from reports from ZAM - File does not begin with
    >'%PDF-'. I tried to just save the file and then open it, but get the same
    >error. I can open other pdf files I have downloaded from other sites ok.
    >Anyone have any idea? I haven't done anything to that server that I am
    >aware of in quite a while.
    >
    > Thanks
    >
    > Bill
    >

  • Restricting the pl/sql error in report region(sql report)

    Hi,
    Is there any way to hiding pl/sql error in report region when we use generic column names*(Use Generic Column Names (parse query at runtime only)*
    ). and type is sql query else displaying alternative error message on that particular report region
    I am using apex 4.1 and 11g database
    Thanks
    Sagar.

    What kind of pl/sql error you are talking about?

  • Cancel a SD invoice error message "no authorization for transaction FB08"

    Hi Gurus,
    I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
    regards
    Anmol Pareek

    Hi Anmol
    Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
    Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
    take help of your basis team.

  • Error is "Report Contents No data

     error is "Report Contents No data

    Hi Godavari,
    Firstly, make sure there are some events happened in the day you selected and mathcing with the options you set.
    I could reproduce your issue if I don't do any events in the day I set in the custom report.
    So, please try to do some actions based on the options in the custom report you set, then go to Audit log report to run a custom report based on the current day, compare the result.
    Note: Audit log reports only log the events which are happened after you enable Audit log reports.
    If the report still doesn't contain data, please check the log file to find more information base on the Correlation ID.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Server Error in '/Report Manager' Application: System.IO.IOException: The file exists. When trying to export a completed report.

    I am using SQL Server 2005.  I run a report which runs and renders perfectly. But I am unable to export it into any format. It fails with the following error:
    Server Error in '/Reports' Application. 
    The file exists.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.IO.IOException: The file exists.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [IOException: The file exists.
    Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
    Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +924
    Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
    Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
    Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
    System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
    I have seen this question asked several years ago, but have never seen a response that suggests what the issue may be.
    I would really appreciate any help in resolving this problem.\
    The application has been running from quite some time and this problem started just recently.
    Thank You.
    -Rick

    Hi Rick,
    According to your description, the exception “System.IO.IOException: The file exists.” is thrown out when you export the report on report manager.
    Generally, the exception is thrown out because there are more than 65535 files without deleting previous temporary files in our temporary directory. Based on my research, it has reported the same issue when exporting the report on report manager, and deleting all
    temp files from C:\Windows\Temp could resolve the issue. I would also suggest you remove the temporary files from C:\Users\<username>\AppData\Local\Temp. Please refer to the first comment at this link:
    System.IO.IOException: The file exists
    Reference:
    Path.GetTempFileName Method
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • BI Publisher - PO_DISPATCH Error generating report output

    Hi everyone,
    Sorry for my bad english... having said that...
    I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
    Error:
    Error generating report output: (235,2309)
    Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
    I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
    So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
    Am I missing some configuration?
    Thanks in advance.
    Regards,
    Veronica.

    Have a look at the following doc:
    "Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
    https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
    Stating this happens for example when there is a location with special characters.

  • Error generating report job with the task name 'FSRM_Report_Task

    Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
    We get the following in the event logs:
    Log Name:      Application
    Source:        SRMREPORTS
    Date:          09/06/2014 08:09:55
    Event ID:      752
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      FILESERVER2.curriculum.riddlesdown.local
    Description:
    Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMREPORTS" />
        <EventID Qualifiers="0">752</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
        <EventRecordID>42920</EventRecordID>
        <Channel>Application</Channel>
        <Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    </Data>
      </EventData>
    </Event>
    We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
    Anybody have any ideas?

    Hi,
    From the error message, it failed because of "invalid argument: storagetype = '101' ".
    101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
    FsrmStorageModuleType enumeration
    http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
    If you have any feedback on our support, please send to [email protected]

  • Error exporting report with sub report and parameters

    Post Author: joncombe
    CA Forum: JAVA
    I am using the JRC to export to a PDF file a report that has a sub report within it. Both the main and subreport connect to an Oracle database via an Oracle ODBC connection and both share a single parameter, RUN_ID. I need to set a value for the parameter in both reports. If I don't do that I get this error:-com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Some parameters are missing valuesI have the following code to update the parameters in both reports.                     ParameterField thisParameter1           = new ParameterField ( );                   ParameterField thisParameter2           = new ParameterField ( );                   Values thisValue1                       = new Values ( );                   Values thisValue2                       = new Values ( );                   ParameterFieldDiscreteValue thisParamDV1= new ParameterFieldDiscreteValue();                   ParameterFieldDiscreteValue thisParamDV2= new ParameterFieldDiscreteValue();                   thisParameter1.setReportName("");                   thisParameter2.setReportName("DQA_GER_Adressverification.rpt");                   thisParameter1.setName("RUN_ID");                   thisParameter2.setName("RUN_ID");                   thisParameter1.setType(FieldValueType.numberField);                   thisParameter2.setType(FieldValueType.numberField);                   thisParamDV1.setValue(254);                   thisParamDV2.setValue(254);                   thisValue1.add(thisParamDV1);                   thisValue2.add(thisParamDV2);                   thisParameter1.setCurrentValues(thisValue1);                   thisParameter2.setCurrentValues(thisValue2);                   parameterFields.add(thisParameter1);                   parameterFields.add(thisParameter2);                  ReportStateInfo repStateInfo = new ReportStateInfo();                  repStateInfo.setParameterFields(parameterFields);                  reqCont.setReportStateInfo(repStateInfo);  With this code in place I have found that if I run using the JRC supplied with Crystal Reports for Eclipse I get the following error:-ERROR - QueryEngine error: verify database failed.ERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)ERROR - Failed to export reportcom.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unexpected exception thrown        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Caused by: java.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        ... 17 moreERROR - JRCAgent1 detected an exception: An error occured while exporting the report        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Error exporting report : report. Error is ReportSDKException: An error occured while exporting the reportAn error occured while exporting the reportcom.businessobjects.reports.sdk.d.byte(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) With the JRC supplied with Crystal Reports XIR2 I get this error:- INFO - PdfExporter: serializing pdf document and cleaning upINFO - Disk Exporter: verifying export to destinationERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.i.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)INFO - Disk Exporter: finalizing export to destinationERROR - JRCAgent1 detected an exception: java.lang.NullPointerException        at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870)        at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:811)        at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1037)        at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830)        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)        at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687)        at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653)        at com.crystaldecisions.reports.queryengine.driverImpl.o.ew(Unknown Source)        at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.d4(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.dP(Unknown Source)        at com.crystaldecisions.reports.queryengine.av.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.do(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.try(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.for(Unknown Source)        at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.a9.if(Unknown Source)        at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.g(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.g(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.null(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.az(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.i.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)I believe the error is that the SQL query in the main report is being updated with the RUN_ID but the SQL in the sub-report is not. I am not sure why the update to set the RUN_ID in the second SQL query fails, but it seems to me the JRC is not detecting it as a missing parameter and is passing the SQL including {?RUN_ID} to Oracle, causing the JDBC driver to fail with this NullPointerException. I think this because further up in the log I see this:-INFO - Executing query: SELECT v.* FROM v_ger_main vwhere v.run_id = 254INFO - Verifying databaseINFO - Executing query: SELECT h.* FROM v_ger_av_ls_tagging hwhere h.run_id = {?RUN_ID}ERROR - QueryEngine error: verify database failed.Both connections are from the same database, but the first has the updated value (254) whilst the second query still seems to have the parameter and so fails to verify.Can someone suggest how I can fix this problem or if I have missed something that is required?Thanks.Jon.

    Post Author: Ted Ueda
    CA Forum: JAVA
    What happens if, instead of passing in parameter field values, you pass the report source object to the viewer (ReportViewerBean for stand-alone or CrystalReportViewer for web)?  The viewer should introspect the report for the parameter fields and bring up a parameter field entry dialog box.  Does such a dialog box come up?  Is only the main report parameter field queried for, or both main and subreport paramter fields?  When you enter correct values for the field, does the report display?
    Hopefully, the above should narrow down the issue.
    By the way, JRC doesn't support ODBC connections, only Java based connectivity such as JDBC, JavaBeans and XML.  If you have a report with ODBC, then it looks for a JNDI connection with the same name.
    Sincerely,
    Ted Ueda

  • Re: BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns

    Hello Everyone.
    I've run into something quite strange and am hoping you can help me.
    I am using Apex 4.0.1 and Oracle version 10.2.0.5. I've created a "classical" report in which the underlying SQL is a very simple:
    select * from pvtabThe Oracle table pvtab consists of 419 columns, all of which are varchar2(88) and number type. That's it.
    When I run the report, al of the columns show up as expected.
    However, when I go into the "Report Attributes" tab and click on one of the fields (any of them, it doesn't matter which one), I immediately get the following error:
    ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "598CAA7B68746A66F4B99E1512C36DED" application checksum = "0"If if replace the "*" with a few actual column names, then I am able to access any of these columns without problem.
    If I put back the "*", I then encounter this error again.
    I have never seen this error with other SQL SELECT statements in which I use the "*" qualifier to retrieve all columns from the table.
    And so, I am wondering if the error is caused because of the large number of columns (419) in my table.
    I've seen this same error mentioned in connection with forms but never with a report.
    So, is there some limit to the number of columns one can have in a "classic" or interactive report?
    Any idea why I would be getting this error?
    Here is the DDL for my table pvtab:
    CREATE TABLE  "PVTAB"
       (     "MICRO" VARCHAR2(4),
         "PRIM" VARCHAR2(4),
         "UNIT" NUMBER,
         "SEC_REF_1" NUMBER,
         "SECN_1" VARCHAR2(88),
         "SEC_REF_2" NUMBER,
         "SECN_2" VARCHAR2(88),
         "SEC_REF_3" NUMBER,
         "SECN_3" VARCHAR2(88),
         "SEC_REF_4" NUMBER,
         "SECN_4" VARCHAR2(88),
         "SEC_REF_5" NUMBER,
         "SECN_5" VARCHAR2(88),
         "SEC_REF_6" NUMBER,
         "SECN_6" VARCHAR2(88),
         "SEC_REF_7" NUMBER,
         "SECN_7" VARCHAR2(88),
         "SEC_REF_8" NUMBER,
         "SECN_8" VARCHAR2(88),
         "SEC_REF_9" NUMBER,
         "SECN_9" VARCHAR2(88),
         "SEC_REF_10" NUMBER,
         "SECN_10" VARCHAR2(88),
         "SEC_REF_11" NUMBER,
         "SECN_11" VARCHAR2(88),
         "SEC_REF_12" NUMBER,
         "SECN_12" VARCHAR2(88),
         "SEC_REF_13" NUMBER,
         "SECN_13" VARCHAR2(88),
         "SEC_REF_14" NUMBER,
         "SECN_14" VARCHAR2(88),
         "SEC_REF_15" NUMBER,
         "SECN_15" VARCHAR2(88),
         "SEC_REF_16" NUMBER,
         "SECN_16" VARCHAR2(88),
         "SEC_REF_17" NUMBER,
         "SECN_17" VARCHAR2(88),
         "SEC_REF_18" NUMBER,
         "SECN_18" VARCHAR2(88),
         "SEC_REF_19" NUMBER,
         "SECN_19" VARCHAR2(88),
         "SEC_REF_20" NUMBER,
         "SECN_20" VARCHAR2(88),
         "SEC_REF_21" NUMBER,
         "SECN_21" VARCHAR2(88),
         "SEC_REF_22" NUMBER,
         "SECN_22" VARCHAR2(88),
         "SEC_REF_23" NUMBER,
         "SECN_23" VARCHAR2(88),
         "SEC_REF_24" NUMBER,
         "SECN_24" VARCHAR2(88),
         "SEC_REF_25" NUMBER,
         "SECN_25" VARCHAR2(88),
         "SEC_REF_26" NUMBER,
         "SECN_26" VARCHAR2(88),
         "SEC_REF_27" NUMBER,
         "SECN_27" VARCHAR2(88),
         "SEC_REF_28" NUMBER,
         "SECN_28" VARCHAR2(88),
         "SEC_REF_29" NUMBER,
         "SECN_29" VARCHAR2(88),
         "SEC_REF_30" NUMBER,
         "SECN_30" VARCHAR2(88),
         "SEC_REF_31" NUMBER,
         "SECN_31" VARCHAR2(88),
         "SEC_REF_32" NUMBER,
         "SECN_32" VARCHAR2(88),
         "SEC_REF_33" NUMBER,
         "SECN_33" VARCHAR2(88),
         "SEC_REF_34" NUMBER,
         "SECN_34" VARCHAR2(88),
         "SEC_REF_35" NUMBER,
         "SECN_35" VARCHAR2(88),
         "SEC_REF_36" NUMBER,
         "SECN_36" VARCHAR2(88),
         "SEC_REF_37" NUMBER,
         "SECN_37" VARCHAR2(88),
         "SEC_REF_38" NUMBER,
         "SECN_38" VARCHAR2(88),
         "SEC_REF_39" NUMBER,
         "SECN_39" VARCHAR2(88),
         "SEC_REF_40" NUMBER,
         "SECN_40" VARCHAR2(88),
         "SEC_REF_41" NUMBER,
         "SECN_41" VARCHAR2(88),
         "SEC_REF_42" NUMBER,
         "SECN_42" VARCHAR2(88),
         "SEC_REF_43" NUMBER,
         "SECN_43" VARCHAR2(88),
         "SEC_REF_44" NUMBER,
         "SECN_44" VARCHAR2(88),
         "SEC_REF_45" NUMBER,
         "SECN_45" VARCHAR2(88),
         "SEC_REF_46" NUMBER,
         "SECN_46" VARCHAR2(88),
         "SEC_REF_47" NUMBER,
         "SECN_47" VARCHAR2(88),
         "SEC_REF_48" NUMBER,
         "SECN_48" VARCHAR2(88),
         "SEC_REF_49" NUMBER,
         "SECN_49" VARCHAR2(88),
         "SEC_REF_50" NUMBER,
         "SECN_50" VARCHAR2(88),
         "SEC_REF_51" NUMBER,
         "SECN_51" VARCHAR2(88),
         "SEC_REF_52" NUMBER,
         "SECN_52" VARCHAR2(88),
         "SEC_REF_53" NUMBER,
         "SECN_53" VARCHAR2(88),
         "SEC_REF_54" NUMBER,
         "SECN_54" VARCHAR2(88),
         "SEC_REF_55" NUMBER,
         "SECN_55" VARCHAR2(88),
         "SEC_REF_56" NUMBER,
         "SECN_56" VARCHAR2(88),
         "SEC_REF_57" NUMBER,
         "SECN_57" VARCHAR2(88),
         "SEC_REF_58" NUMBER,
         "SECN_58" VARCHAR2(88),
         "SEC_REF_59" NUMBER,
         "SECN_59" VARCHAR2(88),
         "SEC_REF_60" NUMBER,
         "SECN_60" VARCHAR2(88),
         "SEC_REF_61" NUMBER,
         "SECN_61" VARCHAR2(88),
         "SEC_REF_62" NUMBER,
         "SECN_62" VARCHAR2(88),
         "SEC_REF_63" NUMBER,
         "SECN_63" VARCHAR2(88),
         "SEC_REF_64" NUMBER,
         "SECN_64" VARCHAR2(88),
         "SEC_REF_65" NUMBER,
         "SECN_65" VARCHAR2(88),
         "SEC_REF_66" NUMBER,
         "SECN_66" VARCHAR2(88),
         "SEC_REF_67" NUMBER,
         "SECN_67" VARCHAR2(88),
         "SEC_REF_68" NUMBER,
         "SECN_68" VARCHAR2(88),
         "SEC_REF_69" NUMBER,
         "SECN_69" VARCHAR2(88),
         "SEC_REF_70" NUMBER,
         "SECN_70" VARCHAR2(88),
         "SEC_REF_71" NUMBER,
         "SECN_71" VARCHAR2(88),
         "SEC_REF_72" NUMBER,
         "SECN_72" VARCHAR2(88),
         "SEC_REF_73" NUMBER,
         "SECN_73" VARCHAR2(88),
         "SEC_REF_74" NUMBER,
         "SECN_74" VARCHAR2(88),
         "SEC_REF_75" NUMBER,
         "SECN_75" VARCHAR2(88),
         "SEC_REF_76" NUMBER,
         "SECN_76" VARCHAR2(88),
         "SEC_REF_77" NUMBER,
         "SECN_77" VARCHAR2(88),
         "SEC_REF_78" NUMBER,
         "SECN_78" VARCHAR2(88),
         "SEC_REF_79" NUMBER,
         "SECN_79" VARCHAR2(88),
         "SEC_REF_80" NUMBER,
         "SECN_80" VARCHAR2(88),
         "SEC_REF_81" NUMBER,
         "SECN_81" VARCHAR2(88),
         "SEC_REF_82" NUMBER,
         "SECN_82" VARCHAR2(88),
         "SEC_REF_83" NUMBER,
         "SECN_83" VARCHAR2(88),
         "SEC_REF_84" NUMBER,
         "SECN_84" VARCHAR2(88),
         "SEC_REF_85" NUMBER,
         "SECN_85" VARCHAR2(88),
         "SEC_REF_86" NUMBER,
         "SECN_86" VARCHAR2(88),
         "SEC_REF_87" NUMBER,
         "SECN_87" VARCHAR2(88),
         "SEC_REF_88" NUMBER,
         "SECN_88" VARCHAR2(88),
         "SEC_REF_89" NUMBER,
         "SECN_89" VARCHAR2(88),
         "SEC_REF_90" NUMBER,
         "SECN_90" VARCHAR2(88),
         "SEC_REF_91" NUMBER,
         "SECN_91" VARCHAR2(88),
         "SEC_REF_92" NUMBER,
         "SECN_92" VARCHAR2(88),
         "SEC_REF_93" NUMBER,
         "SECN_93" VARCHAR2(88),
         "SEC_REF_94" NUMBER,
         "SECN_94" VARCHAR2(88),
         "SEC_REF_95" NUMBER,
         "SECN_95" VARCHAR2(88),
         "SEC_REF_96" NUMBER,
         "SECN_96" VARCHAR2(88),
         "SEC_REF_97" NUMBER,
         "SECN_97" VARCHAR2(88),
         "SEC_REF_98" NUMBER,
         "SECN_98" VARCHAR2(88),
         "SEC_REF_99" NUMBER,
         "SECN_99" VARCHAR2(88),
         "SEC_REF_100" NUMBER,
         "SECN_100" VARCHAR2(88),
         "SEC_REF_101" NUMBER,
         "SECN_101" VARCHAR2(88),
         "SEC_REF_102" NUMBER,
         "SECN_102" VARCHAR2(88),
         "SEC_REF_103" NUMBER,
         "SECN_103" VARCHAR2(88),
         "SEC_REF_104" NUMBER,
         "SECN_104" VARCHAR2(88),
         "SEC_REF_105" NUMBER,
         "SECN_105" VARCHAR2(88),
         "SEC_REF_106" NUMBER,
         "SECN_106" VARCHAR2(88),
         "SEC_REF_107" NUMBER,
         "SECN_107" VARCHAR2(88),
         "SEC_REF_108" NUMBER,
         "SECN_108" VARCHAR2(88),
         "SEC_REF_109" NUMBER,
         "SECN_109" VARCHAR2(88),
         "SEC_REF_110" NUMBER,
         "SECN_110" VARCHAR2(88),
         "SEC_REF_111" NUMBER,
         "SECN_111" VARCHAR2(88),
         "SEC_REF_112" NUMBER,
         "SECN_112" VARCHAR2(88),
         "SEC_REF_113" NUMBER,
         "SECN_113" VARCHAR2(88),
         "SEC_REF_114" NUMBER,
         "SECN_114" VARCHAR2(88),
         "SEC_REF_115" NUMBER,
         "SECN_115" VARCHAR2(88),
         "SEC_REF_116" NUMBER,
         "SECN_116" VARCHAR2(88),
         "SEC_REF_117" NUMBER,
         "SECN_117" VARCHAR2(88),
         "SEC_REF_118" NUMBER,
         "SECN_118" VARCHAR2(88),
         "SEC_REF_119" NUMBER,
         "SECN_119" VARCHAR2(88),
         "SEC_REF_120" NUMBER,
         "SECN_120" VARCHAR2(88),
         "SEC_REF_121" NUMBER,
         "SECN_121" VARCHAR2(88),
         "SEC_REF_122" NUMBER,
         "SECN_122" VARCHAR2(88),
         "SEC_REF_123" NUMBER,
         "SECN_123" VARCHAR2(88),
         "SEC_REF_124" NUMBER,
         "SECN_124" VARCHAR2(88),
         "SEC_REF_125" NUMBER,
         "SECN_125" VARCHAR2(88),
         "SEC_REF_126" NUMBER,
         "SECN_126" VARCHAR2(88),
         "SEC_REF_127" NUMBER,
         "SECN_127" VARCHAR2(88),
         "SEC_REF_128" NUMBER,
         "SECN_128" VARCHAR2(88),
         "SEC_REF_129" NUMBER,
         "SECN_129" VARCHAR2(88),
         "SEC_REF_130" NUMBER,
         "SECN_130" VARCHAR2(88),
         "SEC_REF_131" NUMBER,
         "SECN_131" VARCHAR2(88),
         "SEC_REF_132" NUMBER,
         "SECN_132" VARCHAR2(88),
         "SEC_REF_133" NUMBER,
         "SECN_133" VARCHAR2(88),
         "SEC_REF_134" NUMBER,
         "SECN_134" VARCHAR2(88),
         "SEC_REF_135" NUMBER,
         "SECN_135" VARCHAR2(88),
         "SEC_REF_136" NUMBER,
         "SECN_136" VARCHAR2(88),
         "SEC_REF_137" NUMBER,
         "SECN_137" VARCHAR2(88),
         "SEC_REF_138" NUMBER,
         "SECN_138" VARCHAR2(88),
         "SEC_REF_139" NUMBER,
         "SECN_139" VARCHAR2(88),
         "SEC_REF_140" NUMBER,
         "SECN_140" VARCHAR2(88),
         "SEC_REF_141" NUMBER,
         "SECN_141" VARCHAR2(88),
         "SEC_REF_142" NUMBER,
         "SECN_142" VARCHAR2(88),
         "SEC_REF_143" NUMBER,
         "SECN_143" VARCHAR2(88),
         "SEC_REF_144" NUMBER,
         "SECN_144" VARCHAR2(88),
         "SEC_REF_145" NUMBER,
         "SECN_145" VARCHAR2(88),
         "SEC_REF_146" NUMBER,
         "SECN_146" VARCHAR2(88),
         "SEC_REF_147" NUMBER,
         "SECN_147" VARCHAR2(88),
         "SEC_REF_148" NUMBER,
         "SECN_148" VARCHAR2(88),
         "SEC_REF_149" NUMBER,
         "SECN_149" VARCHAR2(88),
         "SEC_REF_150" NUMBER,
         "SECN_150" VARCHAR2(88),
         "SEC_REF_151" NUMBER,
         "SECN_151" VARCHAR2(88),
         "SEC_REF_152" NUMBER,
         "SECN_152" VARCHAR2(88),
         "SEC_REF_153" NUMBER,
         "SECN_153" VARCHAR2(88),
         "SEC_REF_154" NUMBER,
         "SECN_154" VARCHAR2(88),
         "SEC_REF_155" NUMBER,
         "SECN_155" VARCHAR2(88),
         "SEC_REF_156" NUMBER,
         "SECN_156" VARCHAR2(88),
         "SEC_REF_157" NUMBER,
         "SECN_157" VARCHAR2(88),
         "SEC_REF_158" NUMBER,
         "SECN_158" VARCHAR2(88),
         "SEC_REF_159" NUMBER,
         "SECN_159" VARCHAR2(88),
         "SEC_REF_160" NUMBER,
         "SECN_160" VARCHAR2(88),
         "SEC_REF_161" NUMBER,
         "SECN_161" VARCHAR2(88),
         "SEC_REF_162" NUMBER,
         "SECN_162" VARCHAR2(88),
         "SEC_REF_163" NUMBER,
         "SECN_163" VARCHAR2(88),
         "SEC_REF_164" NUMBER,
         "SECN_164" VARCHAR2(88),
         "SEC_REF_165" NUMBER,
         "SECN_165" VARCHAR2(88),
         "SEC_REF_166" NUMBER,
         "SECN_166" VARCHAR2(88),
         "SEC_REF_167" NUMBER,
         "SECN_167" VARCHAR2(88),
         "SEC_REF_168" NUMBER,
         "SECN_168" VARCHAR2(88),
         "SEC_REF_169" NUMBER,
         "SECN_169" VARCHAR2(88),
         "SEC_REF_170" NUMBER,
         "SECN_170" VARCHAR2(88),
         "SEC_REF_171" NUMBER,
         "SECN_171" VARCHAR2(88),
         "SEC_REF_172" NUMBER,
         "SECN_172" VARCHAR2(88),
         "SEC_REF_173" NUMBER,
         "SECN_173" VARCHAR2(88),
         "SEC_REF_174" NUMBER,
         "SECN_174" VARCHAR2(88),
         "SEC_REF_175" NUMBER,
         "SECN_175" VARCHAR2(88),
         "SEC_REF_176" NUMBER,
         "SECN_176" VARCHAR2(88),
         "SEC_REF_177" NUMBER,
         "SECN_177" VARCHAR2(88),
         "SEC_REF_178" NUMBER,
         "SECN_178" VARCHAR2(88),
         "SEC_REF_179" NUMBER,
         "SECN_179" VARCHAR2(88),
         "SEC_REF_180" NUMBER,
         "SECN_180" VARCHAR2(88),
         "SEC_REF_181" NUMBER,
         "SECN_181" VARCHAR2(88),
         "SEC_REF_182" NUMBER,
         "SECN_182" VARCHAR2(88),
         "SEC_REF_183" NUMBER,
         "SECN_183" VARCHAR2(88),
         "SEC_REF_184" NUMBER,
         "SECN_184" VARCHAR2(88),
         "SEC_REF_185" NUMBER,
         "SECN_185" VARCHAR2(88),
         "SEC_REF_186" NUMBER,
         "SECN_186" VARCHAR2(88),
         "SEC_REF_187" NUMBER,
         "SECN_187" VARCHAR2(88),
         "SEC_REF_188" NUMBER,
         "SECN_188" VARCHAR2(88),
         "SEC_REF_189" NUMBER,
         "SECN_189" VARCHAR2(88),
         "SEC_REF_190" NUMBER,
         "SECN_190" VARCHAR2(88),
         "SEC_REF_191" NUMBER,
         "SECN_191" VARCHAR2(88),
         "SEC_REF_192" NUMBER,
         "SECN_192" VARCHAR2(88),
         "SEC_REF_193" NUMBER,
         "SECN_193" VARCHAR2(88),
         "SEC_REF_194" NUMBER,
         "SECN_194" VARCHAR2(88),
         "SEC_REF_195" NUMBER,
         "SECN_195" VARCHAR2(88),
         "SEC_REF_196" NUMBER,
         "SECN_196" VARCHAR2(88),
         "SEC_REF_197" NUMBER,
         "SECN_197" VARCHAR2(88),
         "SEC_REF_198" NUMBER,
         "SECN_198" VARCHAR2(88),
         "SEC_REF_199" NUMBER,
         "SECN_199" VARCHAR2(88),
         "SEC_REF_200" NUMBER,
         "SECN_200" VARCHAR2(88),
         "SEC_REF_201" NUMBER,
         "SECN_201" VARCHAR2(88),
         "SEC_REF_202" NUMBER,
         "SECN_202" VARCHAR2(88),
         "SEC_REF_203" NUMBER,
         "SECN_203" VARCHAR2(88),
         "SEC_REF_204" NUMBER,
         "SECN_204" VARCHAR2(88),
         "SEC_REF_205" NUMBER,
         "SECN_205" VARCHAR2(88),
         "SEC_REF_206" NUMBER,
         "SECN_206" VARCHAR2(88),
         "SEC_REF_207" NUMBER,
         "SECN_207" VARCHAR2(88),
         "SEC_REF_208" NUMBER,
         "SECN_208" VARCHAR2(88)
       );Thank you for any help/advice.
    Elie
    Edited by: EEG on Jun 12, 2011 2:09 PM

    So, is there some limit to the number of columns one can have in a "classic" or interactive report?Yes. See Oracle® Application Express Application Builder User's Guide Release 4.0, Appendix B: Oracle Application Express Limits.
    Any idea why I would be getting this error?No, but I've replicated it in APEX 4.0.2.00.07 on 11.2.0.1.0 EE using a table of 420 <tt>varchar2(88)</tt> columns:
    >
    ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "50C9BDC0AA1AEF0EB272E9158B2117B4" application checksum = "0"
    >
    Happens whether using <tt>select *</tt> or including all column names in the query. (I know you don't want to type all the column names, but I'd never use <tt>select *</tt> in a production application: always use a proper column list. You can get one without typing by drag-and-drop of a table in most IDEs, or a query from <tt>user_tab_columns</tt>.)
    I hit the problem at 274 columns. Such an arbitrary number leads me to think that the problem is not one of the number of columns per se, but is due to some other limit (possibly a 32K VARCHAR2/RAW buffer somewhere).
    Workaround:
    Updates to the report column attributes are actually being saved, and you can navigate them using the Page Definition tree view as described in Appendix B.
    Getting More Help:
    This is probably a bug. If you have a support agreement with Oracle raise an SR with Oracle Support.
    Also:
    <li>Search the forum using the "ORA-20503" code and other possible terms to see if there's anything relevant. I had a quick look but the only thread in this context recommended an upgrade on an Oracle 9 DB version that's not compatible with APEX 4.0.
    <li>To get the attention of the Oracle APEX team or anyone else who may know more about this problem than we do, edit your original post and change the Subject to be more specific about the actual nature of the problem: <em>BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns</em>, and include your database version/edition and the definition of the <tt>PVTAB</tt> table.
    Finally:
    Somebody's bound to ask, so we might as well get started:
    <li>Why so many columns?
    <li>What requirement is this trying to fulfil?

  • Error Accessing Report in SharePoint Integrated Mode (SQL Server 2008 with SharePoint 2007)

    I have installed reporting services with SharePoint Integration Mode, however, whenever I access the report, below error occurs:
    Report Server has encountered a SharePoint error. (rsSharePointError)
    Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
    Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)
    Checking through the Log Files, there is more detailed error message, but not sure what cause the error:
    library!ReportServer_0-2!4064!11/01/2010-15:00:39:: Call to GetPermissionsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
    library!ReportServer_0-2!4170!11/01/2010-15:00:39:: Call to ListParentsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
    library!ReportServer_0-2!4170!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
    System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
       at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       --- End of inner exception stack trace ---
       at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
       at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
       at Microsoft.SharePoint.SPFile.OpenBinary()
       at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
       --- End of inner exception stack trace ---
    library!ReportServer_0-2!4064!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
    System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
       at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       --- End of inner exception stack trace ---
       at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
       at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
       at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
       at Microsoft.SharePoint.SPFile.OpenBinary()
       at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
       --- End of inner exception stack trace ---
    Any idea on how to resolve the issue?

    Hi Jin Chen,
    Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
    Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
    11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   Database                      
    6f8g Unexpected
    Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
    returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
    11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)  
    0x1EEC
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    Do you have any idea based on the error above?

Maybe you are looking for

  • No https on brand new iMac

    Brand new iMac and I can't access https sites.  I'm using the default administrator account so no parental controls are configured.  The only thing I've done so far is connected to the internet, changed some personal preferences (desktop picture, doc

  • Error activating BI content infoObject 0MDOC

    Hi Experts, I am trying to install a standard BI content infoObject 0MDOC( Measurement Document). But i am not able to install that because of some errors. The errors looks something like this. - >Table /BI0/SMDOC could not be activated - >Table Type

  • Error finding CERT: SEC_ERROR_EXTENSION_NOT_FOUND

    I installed a Certificate in the i Planet. Now when i restart my WebServer, i get in the ErrorLog this failure: Error finding CERT: SEC_ERROR_EXTENSION_NOT_FOUND What problem do i have?

  • Custom skin/style: portlet layout

    Hi! I am building a WebCenter app with portlets on it. The page on which they are displayed is rendered using skinning and a custom style sheet. How can I style the outside of the portlet? Is there a way to change the rounded corner images? Jeroen va

  • Get group Name

    Hi all ! I developp an application with labview 2009. Different user can use this application. Each user may have specific rights depending on the group he belongs to. e.g. admin, operateur.... To do this, i created severeal group in Windows XP, and