Error in Restoring the HDD partition using BootCamp assist

This is regarding error in restoring the HDD partition using BootCamp assist. Yesterday I was trying to instal Windows 8.1 Pro on my Mac Mini.
Started had installing windows software using Boot Camp assist using the USB flash drive
Took the back of Windows Support software from Apple store
Did the HDD partitioning for Windows,
Then went ahead to install the windows and automatically machine restarted.
After few minutes started installing Windows... and stuck for more than 3hrs at by displaying the blue screen of Windows installation... and inactive
I had restarted the using start button, and finally I could not able to install Windows.
Then I got black screen with message ' No boot disk, please insert boot the disk and press any key to restart'
I have restarted using start button by holding 'Alt' key
Finally I could able to started machine with OS X
Now I wanted to remove the partition created above, using Boot Camp assist, but it is not able to do it. There is error message ' Error while restoring the hard disk'
Any help, how to remove this partitioning? Also in every restart I need to hold 'Alt' key to boot the machine with OS X.
-Narsimloo Begari

if you've tried and cannot remove the partition with boot camp assistant, you'll have to open disk utility and reformat the partition there - choose mac journaled and then try to combine this partition back into your existing Mac partition

Similar Messages

Error While Restoring the Oracle Database using Cloud Backup

Hello,
I have been facing a serious error while oracle restoration. I have Backed up Complete Database. For Testing restoration, the DBA removed all the DBF, logs and Control File from there orignal Position.
He restarted the Database in "Startup nomount" mode. No i am not able to connect to target database from my Backup Server remotely.
Whenever i try to restore, it shows following error:-
***RMAN-04005: error from target database:***
***ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
***ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
***"ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
I am using Oracle 11g R2 x64-bit database and on Windows Platform with Windows Server 2008 R2.
Can Anyone help me by connecting, rman to the remote target database when it is in nomount mode.
I am not able to connect the sqlplus remotely.\
Thanks in Advance...
Regards
Pravesh Upadhyay

Devika,
You have to stop all your adapters, your repository, close all IStudio client and stop all sessions connected to this schema before running the oaiimport.
If you don't do this the oaiimport will not work properly as the script will not be able to drop the user and will try to re-create existing objects.
Tip : use the following select to list the session using oaihub902 user (and get rid off them)
select username, count(*)
from V$session
where username in ('OAIHUB902')
group by username
order by count(*) desc, username
JL

Grow Windows Partition using BootCamp or 3rd party application

Hi,
My client is using a MacBook Pro with Mac OS X Leopard and Windows Vista 32 bit. The client uses Windows most of the time.
My question is, can I grow the Windows Partition using BootCamp or a 3rd party app without having to reinstall Windows?

Hi,
best way to enlarge the BootCamp partition is the useage of WinClone http://twocanoes.com/winclone/ which also is a great backup app for BootCamp Windows.
Here are the step-by-step instructions on how-to do this: http://www.twocanoes.com/forums/viewtopic.php?t=515 (Under *My current Windows partition is the wrong size, and I want to make it larger. How do I do this?* )
Other applications which claim that hey can resize BootCamp Windows partitions are iPartition and Drive Genius, but I never have used them.
Regards
Stefan

I got the above error while i restore the standby database using RMAN backu

Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DB

rman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3479    Full    17G        DISK        01:29:42     09-FEB-13
        BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
        Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN    Ckp Time Name
1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3480    Full    17G        DISK        01:21:30     09-FEB-13
        BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN    Ckp Time Name
1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3481    Full    4M         DISK        00:00:03     09-FEB-13
        BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3482    Full    0          DISK        00:00:01     09-FEB-13
        BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x   2 ovsd       dba             96 Sep 27 2009 alert_bkp
-rw-r--r--   1 oracle     dba            195 Mar 15 2007 create.sql
drwxr-xr-x   2 oracle     dba           8192 Aug 7 2009 ctrl_bkp
-rw-r--r--   1 root       sys        565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx   2 root       sys             96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x   4 root       sys             96 Apr 24 2007 esmsrv1
-rw-r-----   1 root       sys        1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r--   1 esmsrv1    dba           5120 Dec 31 2009 esmtables.dmp
-rw-r--r--   1 esmsrv1    dba            538 Dec 31 2009 esmtables.log
drwxrwxrwx   4 root       sys           8192 Mar 10 2009 export
drwxr-xr-x   8 root       sys           8192 Apr 24 2007 finalbackup
-rw-r--r--   1 oracle     dba           3820 Sep 5 2008 invalid.sql
-rw-r--r--   1 esmsrv1    dba         303104 Dec 31 2009 kirdevports.dmp
-rw-r--r--   1 esmsrv1    dba            591 Dec 31 2009 kirdevports.log
drwxr-xr-x   2 root       root            96 Feb 12 2007 lost+found
-rw-r--r--   1 oracle     dba          24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root       sys           8192 Apr 24 2007 ovpi
drwxr-xr-x   2 oracle     dba           8192 Aug 7 2009 pfile_bkp
drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
drwxr-xr-x 28 root       sys           8192 Feb 1 17:15 schedbkp
drwxr-xr-x   2 oracle     dba           8192 Jul 11 2011 sdnnm
-rw-r--r--   1 esmsrv1    dba           2196 Dec 31 2009 srirdevports.log
drwxr-xr-x   2 oracle     dba             96 Mar 13 2009 statsreport
-rw-r--r--   1 oracle     dba            966 Mar 15 2007 tbs.sql
drwxr-xr-x   5 oracle     dba             96 Mar 16 2007 testov
drwxr-xr-x   2 root       sys         442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
-rw-r-----   1 oracle     dba        19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw-   2 oracle     dba           8192 Feb 9 21:36 openview
-rw-r--r--   1 oracle     dba         920442 Feb 9 21:37 rmanbkp-all.log

Partition using Bootcamp and Windows 7

Hi
Would it be a good approach to partition using Bootcamp then install Windows 7? Later I plan to install Parallells. Can it be down this way or should I install Parallels first, then Windows 7?
Thank you.

You may have to see about using the Recovery HD partition to attempt to erase and restore useful function of the capacity lost to the former Windows installation.
And you may have to backup your contents outside the computer to do it. Disk Utility on the Mac OS X historically has not been able to touch a BootCamp created partition; so if BootCamp cannot remove it, then you have to see how to do the equivalent of a reformat of the entire drive (less Recovery partition?) then reinstall your OS X. Maybe from internet recovery, then get your applications, etc from the Mac App store, etc.
A complete system clone of your OS X on an external HDD would be another method to restore after reformat, of the portion you want whole again, not necessarily the space where Recovery may live.
There may be (an)other way(s).
Perhaps someone with recent experience
in this matter can reply & discuss options.
With my antiques, they almost know what I want before I tell them.
Hopefully yours will after you talk to it awhile.
Good luck & happy computing!

The Program Cannot restore the system partition not enough space

Hi..,
When i try to restore my pc using OKR Button, I am getting This Notice from OKR Application.
"The Program Cannot restore the system partition because there is not enough available space on the hardrive"
Please help Me ...
Thanks in Adavance.

Hi Jaulpellissery,
Welcome to Lenovo Community Forums
I’m sorry to hear that the OKR (One Key Recovery) is not working as expected and displaying error message, this issue will occur if any changes are made in HDD (Hard Disc Drive) partition. Please let me know if you have made any changes in the partition space.
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can I delete the mac partition used to create the boot camp partition?

I am using Mac OS 10.9.5 on a late 2011 17" Macbook Pro.
I currently have an SSD in the primary drive slot with my primary Mac partition and an HDD in the Superdrive slot that has one unused Mac partition that I would like to delete and a Windows 8 partition that I would like to keep.
Can I delete the extra Mac partition on the HDD so I can use that as spare space? It was the Mac partition that was used to run Boot Camp and create the Windows 8 partition that is on the same drive so I am nervous that the Windows 8 partition needs to rely on that Mac partition to work for whatever reasons.
I recently went through a huge ordeal to create a Windows 8 Boot Camp partition as I wanted it on my computer. I had previously taken out the Superdrive and replaced it with a data doubler and the original hdd, and I had an aftermarket SSD in the primary drive bay. I had been using the SSD as my Mac partition and the HDD as spare storage space. For my Boot Camp config, I wanted to split the HDD into 2 partitions and make one Windows 8 and the other spare storage space while keeping the SSD dedicated to my Mac partition. Achieving that required removing the SSD, removing the data doubler, reinstalling the Superdrive, putting the original HDD back in the primary drive slot, installing and updating Mac OS on the HDD, using that Mac install to run Boot Camp and create a second partition for Windows 8, installing Windows from the Superdrive, and then putting everything back by taking out the Superdrive, putting the HDD back in the data doubler, and putting the SSD back in. Everything works now. Understandably I don't want to break anything and have to redo this process.
That said I do want to delete that extra Mac partition and use it as extra storage, if I can do so without breaking the Boot Camp Windows 8 partition.

ilovemac wrote:
Use Disk Utility and remove the "BOOTCAMP" partition. Then make "Macintosh HD" all the way to the bottom to regain space.
Wrong advice. Do not use Disk Utility. Use Bootcamp Assistant to remove the Bootcamp partition and return the drive to a single OSx partition. Using Disk Utility will result in lost space, lost data, and possibly an unusable OSx partition. Read the Bootcamp help and user guides.

Restoring the recovery partition

Hello,
We have recently puchased some Lenovo ThinkCentre E72 SFF, please tell us how we can restore the recovery partition on the HDD if we change or deleted this hidden drive. We created the USB recovery disk. The PC has windows 8 pro 64 bit OEM
Thank you

Sounds like you used the Microsoft Windows 8 tool to create a recover USB drive, and not the Lenovo process to create restore media. Lenovo has no bearing on this process, it is a Microsoft application.
Boot from the USB drive, and it will direct you how to restore. This HERE gives the steps needed.

I'm trying to use bootcamp assistant and I keep getting an error message saying I need at least 10gb available on my start up disk and I have 27gb available. Any suggestions?

I'm trying to use bootcamp assistant and I keep getting an error message saying I need at least 10gb available on my start up disk and I have 27gb available. Any suggestions?

That is not what it says, please post the exact and complete message, take a screenshot.

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

To restore the missing files, use the iWork Installer to reinstall iWork.

To restore the missing files, use the iWork Installer to reinstall iWork.
What can i do ?

do you happen to know if there is a way to do this with a flash drive to avoid buying a new external dvd burner for the newer macks a lot of us have?

Restore the dropped tablespace using RMAN?

Hello,
I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
My Oracle version is 9.2.05
if anyone has done this before, please share your valuable ideas.
I wrote the below script for the restore.
run {
allocate channel ch1 type sbt_tape;
startup nomount
restore controlfile; -
>(I guess,if I restore old control file, I might get old structure which help the restore of TB)
alter database mount ;
restore tablespace PSAPPOOLD,PSAPPOOLI;
recover tablespace PSAPPOOLD,PSAPPOOLI;;
release channel ch1;
Thanks,
Arjun
Edited by: Arjun Venkateswarlu on Jul 31, 2009 6:40 PM

> I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
>
> The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
Hello Arjun,
why would you want to do this?
What is is you want to achieve by this action?
BTW: it's not possible to do that.
Check [Performing RMAN Tablespace Point-in-Time Recovery|http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtspit.htm].
You want a "Tablespace point in time recovery" (TSPITR) for a dropped tablespace and that is just not possible with RMAN.
So, the easiest way for you to get this tablespace back would be to restore and recover the database to a different host.
Ah, while we're at it: using RMAN outside the BRTOOLS is not supported by SAP - so you better be a wiz with it because there won't be much help in case anything does not work.
regards,
Lars

WAD-Internal Error when generating the history. Use a different view!

Hello,
When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
how to solve this problem...?
Thanks
kumar

Hello Jeff,
Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
I have seen 2 more options
-Variable Personalization
-Web Reportperson
Could you inform me the pupose of above 2 options?
Regards..

Error in Restoring the HDD partition using BootCamp assist

Similar Messages

Maybe you are looking for