Error in RFC and Lower Layer

Hello,
One of the user getting below dialog box error while executing "MASS" transaction in R3 system.
Error in RFC and Lower Layer
Error : SYSTEM_CANNOT_WRITE_TABLE
function rfctr_drvset
module $ld://bas/710_REL/src/krn/rfc/abrfctrc.cpp#3 $SAP
line 1721
Any idea on this would help...
Regards,

Hello Yogesh,
WOuld you still happen to have an idea on how you got this solved ?
Thanks for the feedback.
Rgds
Bart

Similar Messages

Error Code -1202 and Low Res Account Info

My iTunes Store functions normally except when I look at my account information the pages I can access are in a weird low resolution layout where everything is in a simple Times New Roman font and just goes down the page in one big column. When I try to click on a link on the main account page like "Redeem" or "Purchased" the message error code -1202 pops up and tells me to try again later, I've had this problem for perhaps more than a year.

It might be an issue with the configuration on your computer. I had this issue before and was able to fix it
This article helped me: http://support.apple.com/kb/TS3222

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Question about CHKDSK ,S.M.A.R.T and low level format

hi,
I like to know the difference exactly between CHKDSK and S.M.A.R.T and low level format program(I know that low level format writes zero"s) I mean besides the low level format writes zero's what onother
benefits it has , it repairs some bad sectors or mark bad sectors ect?
very short explanation wil be enough.
thanks
johan
h.david

H.david
1-CHKDSK http://en.wikipedia.org/wiki/CHKDSK CHKDSK verifies the
file system integrity on
hard disks or
floppy disk and fixes logical file system errors.
2-S.M.A.R.T http://en.wikipedia.org/wiki/S.M.A.R.T. smart is a monitoring system for
computer
hard disk drives (HDDs) and
solid-state drives (SSDs)<sup class="reference" id="cite_ref-1">[1]</sup> to detect and report on various indicators of reliability, in the hope of anticipating failures.
3-Low level formatting http://en.wikipedia.org/wiki/Low_level_format
Wanikiya and Dyami--Team Zigzag

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol

We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?

Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh

File to RFC, and through RFC response i am trying to trigger the Mail adapt

Hi All,
Right now i am doing File to RFC, its working fine but now the requirement is when xi connect to ftp and picks the file need to send one success mail after the file pickup and data sent to BW system again i need to send one mail and also error alerts to inbox.
Till now i am not using BPM, can we do this without BPM pls let me know
now i am trying to achieve this in File to RFC, and through RFC response i am trying to trigger the Mail adapter.
or else i need use only BPM pls share the steps which i need to be configure.
Am i correct or pls suggest me some idea to achive this and also pls share some smaple ones in BPM .
Thanks in advance
Venkat

With BPm, follow this:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Instead of receiving the response in file, use mail adapter
Regards,
Prateek

Error in RFC: Name of password is incorrect

Hi All,
I am using GRC AC 10.1 with SP06 and came across with one issue and so need your help to rectify it.
I have created one cross system groups for all deveopement clients (SAP_DEV_CG) and put all the D-clients for all the landscapes.
While running the risk violations reports on user level, i get to see the violations along with an error: "Risk analysis finished with error. Check log for details". SLG1 reports indicates that there is some issue with the RFC: Name or password is incorrect.
The error is quite clear and self explanatory that there is some issue with the RFC; but my concern is that, as I have put multiple development clients to this group so how would i know for sure that SLG1 indicates the RFC (password/name) issue to exactly what system. It will not be feasible to go and see all the systems one-by-one. I checked the logs in detail, navigated through all the technical information but not really able to see the particular system name where the real issue is there.
Looking forward to your quick and positive response.
Thanks,
Ameet

Hi Colleen,
Thanks for your response and sorry for this delay in responding with your suggestions.
SM21 results are as below, But I don't see any hints on the connector which is causing the error with RFC:
Exeuting the jobs for each connectors or checking for each connectors one-by-one to investigate with the RFC issue is one option as I had already mentioend in my original post, but that would take quality time to come to one conclusion.
Do we have any way out here to get this sorted out for the connector causing the error.
Regards,
Ameet

Solution for Visual composer error: 32k span and 64k byte limit

Dear friends,
I am getting the error in visual composer 32k span and 64k byte limit since last half year,
some time error will get resolved by adding layer in to model OR adding some table and form to model OR reduce the animation effect OR even by doing tab strip view for layer model, doing nested ivew.
but this solution not usefull for every time.
what should we do for this error(32k span and 64k byte limit),
is it solved by updating EP version or by EP java stack or any other updates which will solve the This VC error.
64k error i am getting is:
+Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '65570'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/IBD/DVEBMGS10/j2ee/cluster/server0/GUIMachine_Business_Packages/Managment_cockpit11_31066/FLEX_COMPILATION_FOLEDR/AADCDM.mxml:19)
Failed to compile AADCDM.mxml+
hope to get answer form you,
Thanks and Regards,
Dushyant.

Hi,
I think it's better to post this question into the Visual Composer forum. Anyway, the 32k/64k bug is solved with the flex2 server which is already released.
Also have a look into the [Wiki page|https://wiki.sdn.sap.com/wiki/display/VC/64Kbytelimit].
Hope that helps!
Best Regards,
Marcel

What is adaptive RFC and How to Use it

hi friends
what is the adaptive RFC
what is the use of it
how we can use it
explain me anyone
and send pdf also
thanks
ramu.

Hi,
To give u a brief idea.
rfcs are used to call data from the backend that is R/3.We use the Bapis from the R/3 system which have some pre defined functionality and data is populated in the correspoding ui elements in webdynpro interface.earlier Rfcs were used but now we have adaptive rfcs in which
if there are changes in the backend(R/3 system) such as changes in the datatype,structures,fields would be automatically be refllected in the rfcs and there would be no errors in web dyn pro even if there is a change in the back end
to be more specific folow this link
http://help.sap.com/saphelp_nw70/helpdata/EN/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm
and try out this application
to use the rfcs firstly check out this document for configurations
Important Configurations for Calling ABAP Function from Java Web Dynpro Application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e
heres the application.
Creating a Web Dynpro Application Accessing ABAP Functions
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/355b9c90-0201-0010-d2a8-89fece426526
regards
Nikhil Tapkir

Error in RFC Sender

Hi,
We are implementing a BAPI to send data to PI. We have created the following
IN R\3
In SM59 create a new RFC connection type T (TCP/IP).
Technical settings:
Activation type: registered server program
PROGRAM_ID: test_program_id
Gateway options:
GAteway host: Host of your R\3 system
Gateway service: Gateway of your R\3 system
In XI
In your RFC Sender Communication Channel:
RFC Server Parameter:
Application Server: Host of your R\3 system
Application Server Service: Gateway of your R\3 system
PROGRAM ID: test_program_id
RFC Metadata Repository parameter
Message Serer: Your R/3 host.
Message Server Service...
SystemmID...
Use a user with authorization to do RFC calls.
Client...
Language...
After we finish setting up your CC, save and Activate.
Now check the RFC in R/3
When we run the program in SAP( which contains the BAPI ) for the first time, it runs & send the data but for next run it gives error in SAP side(SM58) : Commit fault: com.sap.aii.adapter.rfc.afcommunicat ion.RfcChannelMismatchE
Message no. SR053
Can any one help us to solve the RFC connection issue
Thanks

make sure your program id is unique.try changing it.
Ref:
RFC adapter - /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

Error-The RFC destination EDSCLNT900 is not available in ICWC

Hi All,
I'm working on CRM Utilities 2007. In the ICWC, I'm getting the error 'The RFC destination EDSCLNT900 is not available'. Kindly help me in resolving this error.
Regards,
Archana.
Edited by: archu_sap on Jul 15, 2009 10:30 AM
Edited by: archu_sap on Jul 15, 2009 10:33 AM

Hi,
You have to maintaine RFC Destination EDSCLNT900 in the CRM system.
generally we have to maintain RFC (t-code SM59) in the sytem where Function Module is present.
Suppose you are having FM in ECC system and you want to call in CRMsystem, then you have to maintain RFC destination (EDSCLNT900) in ECC system.
Thanks & Regards.
ShreeMohan

Error creating RFC function /BODS/ABAP_RUN : RFC_ABAP_EXCEPTION-(Exception_Key: FU_NOT_FOUND, SY-MSGTY: E, SY-MSGID: FL,

Hi Expert,
I try to execute job on development system but he showed error "Error creating RFC function </BODS/ABAP_RUN>: <RFC_ABAP_EXCEPTION-(Exception_Key: FU_NOT_FOUND, SY-MSGTY: E, SY-MSGID: FL, SY-MSGNO: 046, SY-MSGV1: /BODS/ABAP_RUN)>. Notify Customer Support.
In ECC I use ABAP execute option as Execute Preloaded. How to solve this problem? Thanks for your advise.

Dear,
have you checked in EXX wether the function group /BODS/BODS is available?
Some notes here:
You will have to have to import the new ABAP Program group "BODS/BOS" which you can find in the local install folder...
Here are some details:
Installing Functions on the SAP Server
SAP BusinessObjects Data Services provides functions that support the use of the ABAP, BAPI, and
IDoc interfaces on SAP servers. You will need some or all of these functions in the normal operation
of the software in an SAP environment. These functions perform such operations as dynamically loading
and executing ABAP programs from Data Services, efficiently running preloaded ABAP programs,
allowing for seamless metadata browsing and importing from SAP servers, and reporting the status of
running jobs. Some of these functions read data from SAP NetWeaver BW sources.
You must upload the provided functions to your SAP server in a production environment. It is
recommended that you always upload the functions to your SAP server whether you are in a
development, test, or production environment. The functions provide seamless integration between
Data Services and SAP servers.
The default installation places two function module files for SAP servers in the ...\Data
Services\Admin\R3_Functions\transport directory. You then upload these files to SAP servers
using the SAP Correction and Transport System (CTS) or manually. Using CTS allows for version
control as the functions evolve across releases.
The installation provides two versions of transport files (depending on the server version you are using)
to install the functions on the SAP server. To obtain the names of the latest transport files for installing
or upgrading these SAP server functions, see the readme.txt file
And I've found those files and text files in the local install folder....in:
Program Files\SAP BusinessObjects\Data Services\admin\R3_Functions
(that's where I've installed it).
There you'll find some descriptive txt as how to proceed.
After installing, it might happen that the executing user is missing some authorizations.
Here my authorizations team helped me by tracing the user and then adding the necessary rights.
Sure hope this will help you.
Notes to check:
see SAP Note 1919255
Note 1916294

Error in RFC and Lower Layer

Similar Messages

Maybe you are looking for