Error in RFC communication with Collaboration Room API

I am trying to setup collaboration rooms integration with learning solution.
while trying to fetch templates, existing rooms available on portal into R/3 (ecc 6) we are getting this error
"Error in RFC communication with Collaboration Room API"
i am trying to perform
SPRO>Training & Event Management>SAP Learning Solution>Training management>Integration>Collaboration room.>Edit Room Profiles and
Edit Role Profiles
we have setup all SSO parameters required for this communication.
Subhash
Message was edited by:
subhash soni

Hi All,
I'm having the same problem myself... There is another simmilar thread at:
[/message/448277#448277 [original link is broken];
It seems that thread has progressed further that this one.
Both seem to be errors connecting LSO to Collaboration rooms. I'm getting both error messages when I try to do the same API connection functions from different points in the system, so I'm guessing that they are the same error. IT seems to be an SSO issue.
Regards,
Matt

Similar Messages

Error in Web Service with Collaboration Room API

Hi experts,
I'm developing a web service for creating Collaboration Rooms. I tested my source in a Web Dynpro Project and everything worked.
Now I placed my code inside a web service, and the service gives a nullpointer exception in this line:
IRooms roomsAPI = (IRooms)PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
I think I have to make some references inside my web service project, but I don't know which and I don't know where.
Can somebody please help me with this issue?
Thanks in advance,
Edwin

Found out my self.
Set the references to "application".

Error in RFC communication with XI

Hi,
We are trying to establish SAP -> XI communication. I think we have done all the required configurations in SAP, XI SDL and XI Directory. When we execute RFC in Se37, We get a short dump. The error details in ST22 (Dump Analysis) are:
Runtime Error: CALL_FUNCTION_REMOTE_ERROR
Error: "call to to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500"
This is very urgent. Any prompt help will be really appreciated.
best regards,
Sanjeev Kumar

Hi,
I suppose you are using a RFC sender adapter to communicate with XI. This is the error that you get when u configure your RFC sender adapter wrong. Check teh followign weblog and make sure you have specified teh parameters correctly.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Hope this helps you.
Cheers,
Siva Maranani.

Error occured while communicating with web server

In Netweaver if you receive this error " error occured while communicating with web server "
check your script logic file if you have mande any change to dimension
names
Vinoo

Hi,
validate below note
Note 1330145 - an error occured while communicating with the web server
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b161a590-0201-0010-5590-91fa5076a914
regards
nag

An error occurred while communicating with the BI server.

Hi Expert,
A error occured when I finish updating the new patch of the Addon, When I finish updating it, it works okay , but when I reboot the system, it disconnet our server and give the following exception :
An error occurred while communicating with the BI server.
System exception thrown while marshaling .NET type System.Byte[] to RFCTYPE_BYTE.
Are there anyone met such issues?
Please help
Len

Hi,
Are you getting this error while connecting to the Backend through BEx Tools.
Is that system available or System down while connecting.
Rgds,
Murali

Error on timesheet submission "An error occurred while communicating with the server.

Hello, we have many users who are encountering errors submitting timesheets following our migration to Project Server 2013 (SP1 April 2014 CU). The error is:
An error occurred while communicating with the server. Check connectivity with your administrator to determine whether further action is necessary.
This follows the specific timesheet, if I open a delegate session on my machine, I can reproduce the error. However, simply deleting and recreating the timesheet has resolved it for many users, at least until the next timesheet submission.
Has anyone seen this sort of widespread behavior and have a solution beyond deleting and recreating the given timesheet?
Thanks!

Hello Joncantrell
I just ran into issue and found a way to resolve, though it may not be the best. I think it is a bug, but here is how I fixed it.
1) Delegating as the user
2) Deleted the timesheet
3) Going line by line, I check each task that had a status of "Not Submitted" and "Send Progress for Select Task".
4) The error came up only for one task.
5) Open that schedule, remove resource from task, saved and published.
6) Deleted and recreated timesheet
7) Submitted timesheet and processed normally.
I hope this helps
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

An error occured in communication with the BW server.--urgent

Hi all,
Can anybody help me.
i got 1 issue like ,when iam trying to executing query, iam getting the error pop up screen like
'An error occured in communication with BW server'
'Due to this ,the Connection Has To be Closed'.
Detailed Description:
1)No space left in SHARED MEMORY.
2)An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occured,but with neither...
3)Program error in class SAPMSSY1 method:UNCAUGHT_EXCEPTION.
Could any body help me,it very urgent....

HI COULD ANYBODY RESPOND TO THIS ISSUE IT VERY URGENT BUDDY'S
PLZ..........

"error occurred while communicating with scanner" mac os x 10.8.2 with new hp 6700.

device will not scan to computer. returns "error occurred while communicating with scanner". this error returns from the print/scan settings, from image capture and from the HP scan utility. the printer will copy so the scanner will function to some extent. it is brand new. on a wireless network. prints fine
OS is fully up-to-date, drivers are current, downloaded from HP and installed rather than using CD. device has been unplugged from wall, computer restarted, printers cleared and reinstalled.
any other ideas?
some more info...
if a sheet is placed in the scan feeder, the scanner illuminates and makes a ping sound.
firewalls are off
router has UPnP on
old printer, an hp6500, worked fine with identical setup
and a further note as I try to solve this...
the webscan function works from the printer web server
HP Utility does not have a Scan section. HP Utility Applications has Scan 3. this does not work

Hi BetterL8,
I understand your frustration. The software you are using was designed for the older operating system not for Mavericks. There has not been software released for the c310 that is compatible with Mavericks therefore, you will be using the Apples Print and Scan not the HP Scan. Because you have this old software still on the computer, I recommend you uninstall it and download the Apple Software Update. Follow the instructions below:
Scrub
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol
Repair Disk Permissions (this is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer.
Check for apple updates
Connect the USB cable if it is not already connected
Click on the Apple icon
Select Software Updates.
Restart the computer.
Leave the printer on and unplug the power cable, reconnect after 1 minute.
See next post for further instructions....
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error encountered while communicating with primary IP-address

Hi
I have recently deployed my first Exchange Server. This is an Exchange Server 2013 Standard and I set up everything using this document on Technet for installation: http://technet.microsoft.com/en-us/library/bb124778(v=exchg.150).aspx
For post-installation I used this document on Technet: http://technet.microsoft.com/en-us/library/bb124397(v=exchg.150).aspx
I have setup access to port 25, 587, 143, 993, 110, 995, 80, 443 in my routers SPI-firewall and created DNAT rules for each of these ports as well. I can send mail without any issues, but I cannot receive. Reverse DNS is working both internally and externally.
I can telnet to port 25 on my external IP and external domain which is exchange.mydomain.tld
My Exchange-server is running inside a Gen1 Hyper-V virtual machine on a Windows Server 2012 R2.
My Exchange Server has the following resources:
OS: Windows Server 2012 R2
CPU: 2 cores of AMD FX-6120 3.30GHz
RAM: 3584MB
HDD1: IDE 80GB VHDX - is currently used for all system files and for Exchange.
HDD2: SCSI 127GB VHDX - will be used for Exchange DB and logs when everything is working.
When sending mail from any internal or external e-mail address to an internal e-mail address I get the following error in Exchange Queue Viewer:
"451 4.4.0 Error encountered while communicating with primary target IP address:"421 4.2.1 Unable to connect." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate
hosts. The Last"
How can I solve this issue? If you need any more information please let me know and I will see if I can find it.

Hi I have now tried to send mail to an internal address using telnet. This returned the following value:
250 2.6.0 <[email protected]> [InternalId=1971389988866] Queued mail for delivery
Next I tried to send to an external mail by using telnet and it returned this result when adding the reciepient:
550 5.7.1 Unable to relay
This is the output of the Test-Servicehealth cmdlet:
Role : Mailbox Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeDelivery, MSExchangeIS, MSExchangeMailboxAssistant
s, MSExchangeRepl, MSExchangeRPC, MSExchangeServiceHost, MSExchangeSubmission, MSExchangeThro
ttling, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Client Access Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeMailboxReplication, MSExchangeRPC, MSExchangeServi
ceHost, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Unified Messaging Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeServiceHost, MSExchangeUM, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Hub Transport Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeEdgeSync, MSExchangeServiceHost, MSExchangeTranspo
rt, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Can we use this information to find a possible source for my issues?

An error occured while communicating with the web server

hi Experts
Im having a problem with bpc when i try to send data in an input schedule
message error prompt
"an error occured while communicating with the webserver"
Any body encounters this?
Thanks

Hi,
I am from support team, so this is the method how I troubleshoot this kind of issue.
First, I would like to say that this error message in BPC for Excel is a very common error, and it means nothing. Please move on the following steps:
1. Reproduce the issue again.
2. Logon to ABAP side, go to RSA1. Enter OBJECT=UJ* and SUBOBJECT=UJQ.
Note: UJQ means query related. The same, you can use UJD to filter all Data Manager's activity.
3. Under UJQ, you will find the log, which you reproduced in step 1. It must be shown as Red. Double-click it. See what the error message is.
4. Besides the error, right-side, you will see a Details button. Click on it, and another window with MDX Statement will show up.
5. Copy the MDX statement out for next usage.
6. Go to another T-code MDXTEST (this is a test tool for MDX statement).
7. Copy the MDX statement into MDXTEST, and run it. (find the run button at above).
What is the error message?
Based on my experience, if this is a Time out error, related to MDX Paser, you can try note:
1032461 MDX parser does not start
If not, it must be a specific error. Need to check further, accordingly.

App World Web Plugin Error: An error has occurred communicating with the BlackBerry App World Client.

App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
Please help me with this problem. I have a new Blackberry Storm 2. When I sign in, it asked me to get the BB appworld browser plug-in and connect my smartphone. So, i did connect it. Then, this message kept on popping out. I don't know how to fix it.

Okay. this is what I do.
I go onto http://appworld.blackberry.com/webstore/ & sign in. I then connect my phone & enter the device password. As soon as I do that, this comes up -> App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
I don't know what's the problem & I've been searching for a solution but to no avail.

Error in RFC communication:imsdefault_reg

hi
iam getting this error in trex admin toool..please advice me to resolve this
error in RFC communication:imsdefault_reg
prabash

Hi Prabash,
could be a handful of reasons.
Please open a support message to SAP and grant remote access to your system. Apart from that, please consult the documentation on RFC connection to TREX:
http://help.sap.com/saphelp_erp2005/helpdata/en/19/752e4241f51a2ae10000000a1550b0/frameset.htm
Best, Karsten

An error occurred while communicating with the database lightswitch

Hi
My Azure project was running just fine. I had made no changes but since yesterday when any user tries to login the get this error message:
"an error occurred while communicating with the database lightswitch"
I found a topic posted by "Mr Yossu" on this topic at
http://social.msdn.microsoft.com/Forums/en-US/lightswitch/thread/655e4f03-d327-40fc-8d3b-8134e91ec2a4
but his situation seems slightly different.
In his case he says "I just updated (ie redeployed) it again, and when I try to log in, I get an error "An error occurred while communicating with the database."
In my case I haven't updated anything.
Any ideas will be greatly appreciated because my system is down until I find a resolution.
Thanks in advance, Mark.
Mark

In checking the helpful suggestion "I guess there is something wrong with the authentication database table", this is what I have done so far.
In the "Database Connections" step of the VS LS Azure publishing wizard, the "Specify the user conection:" is described as:
"This connection will be used by the application to read and write data from the database"
I click the "..." button and click to "Test" the connection and I get "Test connection succeeded".
Next I logged in to SQLAzure and see
this screen.
At this point I'm unsure where to go with this.
If anyone has an idea please let me know.
Thanks, Mark.
Mark

"Error occurred while communicating with the scanner"

Just bought this printer from a friend, and every time I try to scan I get the error message "Scanner reported an error: An error occurred while communicating with the scanner."
Anyone know how to fix this so I can use the scanner?

You @cleoambre are a good friend, you bought the printer and are now trying to help troubleshoot the scanner issue! I would be happy to help you with this
Since this printer is a tad on the older side, there is no full feature software and driver for it to install on 10.6. Instead you can Install the printer using the Apple Software update.
You can still complete scans from the Mac using Preview, Image Capture, or the System Preferences window to scan. I will post a few helpful videos below;
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
Please let me know if this information helps to resolve the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Error in RFC communication with Collaboration Room API

Similar Messages

Maybe you are looking for